[PATCH 02/20] arm: dts: Support SC584-EZKIT

[Oliver Gaskell via B4 Relay]

From: Oliver Gaskell <Oliver.Gaskell at analog.com>

Add minimal device tree for Analog Devices' SC584-EZKIT board, and
common files for the SC58x family.

This patch depends on Patch 01, for sc5xx.dtsi.

Co-developed-by: Greg Malysa <greg.malysa at timesys.com>
Co-developed-by: Trevor Woerner <twoerner at gmail.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell at analog.com>
---
 arch/arm/dts/Makefile        |  1 +
 arch/arm/dts/sc584-ezkit.dts | 13 +++++++++++++
 arch/arm/dts/sc58x.dtsi      | 23 +++++++++++++++++++++++
 3 files changed, 37 insertions(+)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8fa56cc9f4..5b87c8972f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1276,6 +1276,7 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
 					imx8mm-cl-iot-gate-ied-tpm1.dtbo
 
 dtb-$(CONFIG_TARGET_SC573_EZKIT) += sc573-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC584_EZKIT) += sc584-ezkit.dtb
 
 ifneq ($(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)$(CONFIG_TARGET_IMX8MP_RSB3720A1_6G),)
 dtb-y += imx8mp-rsb3720-a1.dtb
diff --git a/arch/arm/dts/sc584-ezkit.dts b/arch/arm/dts/sc584-ezkit.dts
new file mode 100644
index 0000000000..4ec6bcfb65
--- /dev/null
+++ b/arch/arm/dts/sc584-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc58x.dtsi"
+
+/ {
+	model = "ADI SC584-EZKIT";
+	compatible = "adi,sc584-ezkit", "adi,sc58x";
+};
diff --git a/arch/arm/dts/sc58x.dtsi b/arch/arm/dts/sc58x.dtsi
new file mode 100644
index 0000000000..66145315ab
--- /dev/null
+++ b/arch/arm/dts/sc58x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include "sc5xx.dtsi"
+
+/ {
+	gic: interrupt-controller at 310b2000 {
+		compatible = "arm,cortex-a5-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x310B2000 0x1000>,
+		      <0x310B4000 0x100>;
+	};
+};
+
+&timer0 {
+	reg = <0x31001004 0x100>,
+	      <0x31001060 0x100>;
+	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};

-- 
2.34.1