[PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot

[Lukasz Majewski]

Hi Fabio,

> Hi Lukasz,
> 
> On Tue, Aug 20, 2024 at 12:00 PM Lukasz Majewski <lukma at denx.de>
> wrote:
> >
> > The image offset when booting from SPI-NOR (QSPI, FSPI driver) is
> > different than one for SD card / eMMC as extra space (0x1000) is
> > consumed by FSPI configuration header (CONFIG_FSPI_CONF_HEADER).
> >
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > ---
> > Changes for v2:
> > - Avoid line breaks with defines  
> 
> From the other thread, my understanding is that QSPI boot is still not
> working with this patch applied.
> 

But this is an orthogonal problem - the problem is with binman image
generation.

This patch follows the code already present in e.g. imx8mm_beacon*
boards.

> Please resend this patch when the QSPI boot problem is resolved.
> 

As I've written above - problem is solely with binman code generation -
after reverting 3 last commits from imx8mm-u-boot.dtsi the image is
correctly generated.

> Thanks




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20240828/b371c986/attachment.sig>