[PATCH 3/3] imx: Remove CFG_MXC_USB_PORTSC

[Tim Harvey]

On Mon, Aug 26, 2024 at 5:58 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> From: Fabio Estevam <festevam at denx.de>
>
> '#define CFG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)' can
> be removed from mx5/mx6/mx7/mx8m board config files as it is the
> default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c.
>
> Suggested-by: Tim Harvey <tharvey at gateworks.com>
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
<snip>
>  #ifdef CONFIG_CMD_NET
> diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
> index 1491c509820d..a668eb70fc73 100644
> --- a/include/configs/m53menlo.h
> +++ b/include/configs/m53menlo.h
> @@ -71,7 +71,6 @@
>   */
>  #ifdef CONFIG_CMD_USB
>  #define CFG_MXC_USB_PORT               1
> -#define CFG_MXC_USB_PORTSC             (PORT_PTS_UTMI | PORT_PTS_PTW)
>  #endif
>

Hi Fabio,

Thanks for doing this - we are at a point where the
include/configs/<board>.h files are almost empty.

It doesn't look like CFG_MXC_USB_PORT (defined in 6 mx51/mx53
includes) is not used anymore so it can be removed as well.

With all of these outdated USB defines removed you could also prune
out the enclosing '#ifdef CONFIG_CMD_USB' and the '/* USB configs */'
comments in the includes but that certainly would be a manual edit of
the files.

Best Regards,

Tim