[PATCH V3 9/9] sunxi: Add support for Anbernic RG35XX-2024

Chris Morgan macroalpha82 at gmail.com
Fri Aug 30 17:55:14 CEST 2024


From: Chris Morgan <macromorgan at hotmail.com>

The Anbernic RG35XX series of devices are based around an Allwinner
H700 SoC with 1GB of RAM, 2 SD cards, and multiple input buttons.

This bootloader has been tested on the Anbernic RG35XX-2024 and
RG35XX-H, but should be suitable for the entire lineup of H700 based
devices.

A future series of updates will add board selection logic to identify
and load the correct device tree automatically.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 board/sunxi/MAINTAINERS                |  5 +++++
 configs/anbernic_rg35xx_h700_defconfig | 28 ++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 configs/anbernic_rg35xx_h700_defconfig

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 4ad77c75f5..84799879e8 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -132,6 +132,11 @@ M:	Paul Kocialkowski <contact at paulk.fr>
 S:	Maintained
 F:	configs/Ampe_A76_defconfig
 
+ANBERNIC RG35XX-2024
+M:	Chris Morgan <macromorgan at hotmail.com>
+S:	Maintained
+F:	configs/anbernic_rg35xx_h700_defconfig
+
 BANANAPI M1 PLUS
 M:	Jagan Teki <jagan at amarulasolutions.com>
 S:	Maintained
diff --git a/configs/anbernic_rg35xx_h700_defconfig b/configs/anbernic_rg35xx_h700_defconfig
new file mode 100644
index 0000000000..57112f7d70
--- /dev/null
+++ b/configs/anbernic_rg35xx_h700_defconfig
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h700-anbernic-rg35xx-2024"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x08080808
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0x7887bbbb
+CONFIG_DRAM_SUN50I_H616_TPR2=0x1
+CONFIG_DRAM_SUN50I_H616_TPR6=0x40808080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6633
+CONFIG_DRAM_SUN50I_H616_TPR11=0x1b1f1e1c
+CONFIG_DRAM_SUN50I_H616_TPR12=0x06060606
+CONFIG_DRAM_SUN50I_H616_PHY_ADDR_MAP_1=y
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR4=y
+CONFIG_DRAM_CLK=672
+CONFIG_R_I2C_ENABLE=y
+CONFIG_DEFAULT_FDT_FILE="sun50i-h700-anbernic-rg35xx-2024.dtb"
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_REGULATOR_AXP=y
+CONFIG_AXP717_POWER=y
+CONFIG_AXP_DCDC2_VOLT=940
+CONFIG_AXP_DCDC3_VOLT=1100
-- 
2.34.1



More information about the U-Boot mailing list