[PATCH v1 3/3] configs: th1520_lpi4a: enable mmc controller support

[bigunclemax at gmail.com]

From: Maksim Kiselev <bigunclemax at gmail.com>

Enable driver for DesignWare MSHC. TH1520 supports all
speed modes up to HS400ES and UHS SDR105.

Also enable ADMA and mmc command.

Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>
---
 configs/th1520_lpi4a_defconfig | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/configs/th1520_lpi4a_defconfig b/configs/th1520_lpi4a_defconfig
index 3b6ff62ee1..d13c97463a 100644
--- a/configs/th1520_lpi4a_defconfig
+++ b/configs/th1520_lpi4a_defconfig
@@ -54,6 +54,8 @@ CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -66,7 +68,14 @@ CONFIG_NO_NET=y
 CONFIG_DWAPB_GPIO=y
 # CONFIG_I2C is not set
 # CONFIG_INPUT is not set
-# CONFIG_DM_MMC is not set
+CONFIG_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_SNPS=y
 # CONFIG_MTD is not set
 # CONFIG_POWER is not set
 CONFIG_SYS_NS16550=y
-- 
2.45.2