[PATCH v1 3/3] configs: th1520_lpi4a: enable mmc controller support

[Jaehoon Chung]

> -----Original Message-----
> From: bigunclemax at gmail.com <bigunclemax at gmail.com>
> Sent: Monday, December 2, 2024 12:07 AM
>
> From: Maksim Kiselev <bigunclemax at gmail.com>
>
> Enable driver for DesignWare MSHC. TH1520 supports all
> speed modes up to HS400ES and UHS SDR105.
>
> Also enable ADMA and mmc command.
>
> Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  configs/th1520_lpi4a_defconfig | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/configs/th1520_lpi4a_defconfig b/configs/th1520_lpi4a_defconfig
> index 3b6ff62ee1..d13c97463a 100644
> --- a/configs/th1520_lpi4a_defconfig
> +++ b/configs/th1520_lpi4a_defconfig
> @@ -54,6 +54,8 @@ CONFIG_CMD_BOOTMENU=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_LOADB is not set
>  # CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_MMC_SPEED_MODE_SET=y
>  # CONFIG_CMD_ITEST is not set
>  # CONFIG_CMD_SOURCE is not set
>  # CONFIG_CMD_SETEXPR is not set
> @@ -66,7 +68,14 @@ CONFIG_NO_NET=y
>  CONFIG_DWAPB_GPIO=y
>  # CONFIG_I2C is not set
>  # CONFIG_INPUT is not set
> -# CONFIG_DM_MMC is not set
> +CONFIG_MMC=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ADMA=y
> +CONFIG_MMC_SDHCI_SNPS=y
>  # CONFIG_MTD is not set
>  # CONFIG_POWER is not set
>  CONFIG_SYS_NS16550=y
> --
> 2.45.2