[PATCH 05/11] rockchip: rk3288-firefly: Include required DT nodes in xPL
Jonas Karlman
jonas at kwiboo.se
Thu Dec 12 23:09:38 CET 2024
Add bootph- props to emmc, sdmmc, uart and related pinctrl nodes to
ensure devices and pinctrl can be used in xPL and U-Boot pre-reloc.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
arch/arm/dts/rk3288-firefly-u-boot.dtsi | 55 ++++++++++++++++++++++---
configs/firefly-rk3288_defconfig | 2 +-
2 files changed, 51 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/rk3288-firefly-u-boot.dtsi b/arch/arm/dts/rk3288-firefly-u-boot.dtsi
index 8870188e6129..435a02acea5d 100644
--- a/arch/arm/dts/rk3288-firefly-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-firefly-u-boot.dtsi
@@ -26,35 +26,75 @@
};
&emmc {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&emmc_bus8 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&emmc_clk {
+ bootph-pre-ram;
+ bootph-some-ram;
};
-&gpio3 {
+&emmc_cmd {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&emmc_pwr {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio7 {
+ /delete-property/ bootph-all;
+};
+
+&pcfg_pull_none {
bootph-all;
};
-&pcfg_pull_up_drv_12ma {
+&pcfg_pull_none_12ma {
bootph-pre-ram;
+ bootph-some-ram;
};
-&pinctrl {
+&pcfg_pull_up {
bootph-all;
};
+&pcfg_pull_up_drv_12ma {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
&sdmmc {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_bus4 {
bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sdmmc_cd {
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_clk {
bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_cmd {
bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_pwr {
@@ -64,3 +104,8 @@
&uart2 {
bootph-all;
};
+
+&uart2_xfer {
+ bootph-pre-sram;
+ bootph-pre-ram;
+};
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index 87ed0c0d2aea..862a17c84e07 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -38,7 +38,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_REGMAP=y
--
2.47.1
More information about the U-Boot
mailing list