[PATCH 2/7] rockchip: rk356x: Sync device tree from linux v6.8-rc1
Kever Yang
kever.yang at rock-chips.com
Thu Feb 1 04:00:38 CET 2024
On 2024/1/27 06:14, Jonas Karlman wrote:
> Sync rk356x device tree from linux v6.8-rc1.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3566-quartz64-a.dts | 5 +++--
> arch/arm/dts/rk3566-radxa-cm3-io.dts | 1 +
> arch/arm/dts/rk3566-soquartz-blade.dts | 4 ++++
> arch/arm/dts/rk3566-soquartz-cm4.dts | 4 ++++
> arch/arm/dts/rk3566-soquartz-model-a.dts | 4 ++++
> arch/arm/dts/rk3566-soquartz.dtsi | 1 -
> 6 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts
> index 854d02b46e6f..59843a7a199c 100644
> --- a/arch/arm/dts/rk3566-quartz64-a.dts
> +++ b/arch/arm/dts/rk3566-quartz64-a.dts
> @@ -31,8 +31,9 @@
> fan: gpio_fan {
> compatible = "gpio-fan";
> gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - gpio-fan,speed-map = <0 0
> - 4500 1>;
> + gpio-fan,speed-map =
> + < 0 0>,
> + <4500 1>;
> pinctrl-names = "default";
> pinctrl-0 = <&fan_en_h>;
> #cooling-cells = <2>;
> diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts
> index 1b1c67d5b1ef..3ae24e39450a 100644
> --- a/arch/arm/dts/rk3566-radxa-cm3-io.dts
> +++ b/arch/arm/dts/rk3566-radxa-cm3-io.dts
> @@ -14,6 +14,7 @@
> compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
>
> aliases {
> + ethernet0 = &gmac1;
> mmc1 = &sdmmc0;
> };
>
> diff --git a/arch/arm/dts/rk3566-soquartz-blade.dts b/arch/arm/dts/rk3566-soquartz-blade.dts
> index 4e49bebf548b..fdbf1c783242 100644
> --- a/arch/arm/dts/rk3566-soquartz-blade.dts
> +++ b/arch/arm/dts/rk3566-soquartz-blade.dts
> @@ -13,6 +13,10 @@
> model = "PINE64 RK3566 SOQuartz on Blade carrier board";
> compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
>
> + aliases {
> + ethernet0 = &gmac1;
> + };
> +
> /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
> vcc3v0_sd: vcc3v0-sd-regulator {
> compatible = "regulator-fixed";
> diff --git a/arch/arm/dts/rk3566-soquartz-cm4.dts b/arch/arm/dts/rk3566-soquartz-cm4.dts
> index cddf6cd2fecb..6ed3fa4aee34 100644
> --- a/arch/arm/dts/rk3566-soquartz-cm4.dts
> +++ b/arch/arm/dts/rk3566-soquartz-cm4.dts
> @@ -8,6 +8,10 @@
> model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
> compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
>
> + aliases {
> + ethernet0 = &gmac1;
> + };
> +
> /* labeled +12v in schematic */
> vcc12v_dcin: vcc12v-dcin-regulator {
> compatible = "regulator-fixed";
> diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts
> index 2208dbfb7f0a..f2095dfa4eaf 100644
> --- a/arch/arm/dts/rk3566-soquartz-model-a.dts
> +++ b/arch/arm/dts/rk3566-soquartz-model-a.dts
> @@ -8,6 +8,10 @@
> model = "PINE64 RK3566 SOQuartz on Model A carrier board";
> compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
>
> + aliases {
> + ethernet0 = &gmac1;
> + };
> +
> /* labeled DCIN_12V in schematic */
> vcc12v_dcin: vcc12v-dcin-regulator {
> compatible = "regulator-fixed";
> diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi
> index 63bae36b8f7e..bfb7b952f4c5 100644
> --- a/arch/arm/dts/rk3566-soquartz.dtsi
> +++ b/arch/arm/dts/rk3566-soquartz.dtsi
> @@ -12,7 +12,6 @@
> compatible = "pine64,soquartz", "rockchip,rk3566";
>
> aliases {
> - ethernet0 = &gmac1;
> mmc0 = &sdmmc0;
> mmc1 = &sdhci;
> mmc2 = &sdmmc1;
More information about the U-Boot
mailing list