February 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Feb 1 01:20:19 CET 2024
Ending: Thu Feb 29 23:59:07 CET 2024
Messages: 2104

• Double free error with ubi_volume_desc/ubi_close_volume   Nieuwenhuizen Felix (ETAS-DAP/XPC-Fe8)
• Double free error with ubi_volume_desc/ubi_close_volume   Nieuwenhuizen Felix (ETAS-DAP/XPC-Fe8)
• [PATCH] xilinx: zynqmp: Add the missing function prototype   Venkatesh Yadav Abbarapu
• [PATCH] lib: sparse: Fix error checking for write_sparse_chunk_raw   Sean Anderson
• [PATCH v3 2/3] board: Add support for Conclusive WHLE-LS1046A   Sean Anderson
• [PATCH v3 3/3] board: Add support for Conclusive WHLE-LS1088A   Sean Anderson
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Sean Anderson
• [PATCH] boot: Only define checksum algos when the hashes are enabled   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• HABv4 with SPL and u-boot-dtb.img on i.MX6   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH] ecdsa: Avoid null pointer crash in ecdsa-verify due to absent property   Sean Anderson
• [PATCH v2] arm64: zynqmp: Support semihosting boot method   Sean Anderson
• [PATCH] arm64: zynqmp: Support semhosting boot method   Sean Anderson
• [PATCH v2] arm64: zynqmp: Support semihosting boot method   Sean Anderson
• [RESEND PATCH v2] arm64: zynqmp: Support semihosting boot method   Sean Anderson
• [PATCH] Check curve_name for null to avoid crash   Sean Anderson
• [PATCH] clk: Revise help text for clk_get_parent_rate()   Sean Anderson
• [PATCH v5] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Sean Anderson
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v5] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v5] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v5] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v6] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [PATCH v4] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   Anwar, Md Danish
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Anwar, Md Danish
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Anwar, Md Danish
• [PATCH 4/7] smbios: string table always needs two terminating NUL bytes   Ilias Apalodimas
• [PATCH 2/7] cmd: smbios: add missing colon after UUID   Ilias Apalodimas
• [PATCH 5/7] smbios: if a string value is unknown, use string number 0   Ilias Apalodimas
• [PATCH 7/7] smbios: correctly fill chassis handle   Ilias Apalodimas
• [PATCH v2] arm: Add OVERLAY command to BSS section on ARM64   Ilias Apalodimas
• [PATCH v2] arm: Add OVERLAY command to BSS section on ARM64   Ilias Apalodimas
• [PATCH 1/3] cmd: smbios: show correct table size for SMBIOS2.1 entry point   Ilias Apalodimas
• [PATCH 3/3] smbios: correctly name Structure Table Maximum Size field   Ilias Apalodimas
• [PATCH 1/1] efi_loader: simplify error message in efi_disk_create_raw()   Ilias Apalodimas
• [PATCH 1/1] arm: separate .data and .text sections of EFI binaries   Ilias Apalodimas
• [PATCH v4 19/39] board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER   Ilias Apalodimas
• [PATCH] disk: dos: Add all options for EFI System Partitions   Ilias Apalodimas
• [PATCH] implement policy_pcr commands to lock NV-indexes behind a PCR   Ilias Apalodimas
• [PATCH v8 5/8] arm: armv8: save boot arguments   Ilias Apalodimas
• [PATCH v8 4/8] arm: armv7: save boot arguments   Ilias Apalodimas
• [PATCH 01/10] mach-snapdragon: Add support for IPQ9574   Ilias Apalodimas
• [RFC PATCH 0/6] Clean up arm linker scripts   Ilias Apalodimas
• [RFC PATCH 1/6] arm: baltos: remove custom linker script   Ilias Apalodimas
• [RFC PATCH 2/6] arm: clean up v7 and v8 linker scripts for bss_start/end   Ilias Apalodimas
• [RFC PATCH 3/6] arm: fix __efi_runtime_rel_start/end definitions   Ilias Apalodimas
• [RFC PATCH 4/6] arm: clean up v7 and v8 linker scripts for __rel_dyn_start/end   Ilias Apalodimas
• [RFC PATCH 5/6] arm: fix __efi_runtime_start/end definitions   Ilias Apalodimas
• [RFC PATCH 6/6] arm: move image_copy_start/end to linker symbols   Ilias Apalodimas
• [PATCH v2 1/2] arm: page align EFI binary section   Ilias Apalodimas
• [PATCH v2 2/2] arm: separate .data and .text sections of EFI binaries   Ilias Apalodimas
• [RFC PATCH 0/6] Clean up arm linker scripts   Ilias Apalodimas
• [GIT PULL] Please pull u-boot-amlogic-fixes-20240201   Neil Armstrong
• [PATCH] configs: khadas-vim3*_android: fix AVB oom error   Neil Armstrong
• [PATCH] button: qcom-pmic: demote "unknown button" message to debug   Neil Armstrong
• [PATCH v4 06/39] clock/qcom: qcs404: fix clk_set_rate   Neil Armstrong
• [PATCH v4 07/39] serial: msm: add debug UART   Neil Armstrong
• [PATCH v4 08/39] serial: msm: fix clock handling and pinctrl   Neil Armstrong
• [PATCH v4 12/39] sandbox: dts: fix qcom pmic gpio   Neil Armstrong
• [PATCH v4 15/39] pinctrl: qcom: apq8016: init pre-reloaction   Neil Armstrong
• [PATCH v4 14/39] pinctrl: qcom: fix DT compatibility   Neil Armstrong
• [PATCH v4 13/39] pinctrl: qcom: stub support for special GPIOs   Neil Armstrong
• [PATCH v4 21/39] mach-snapdragon: dynamic load addresses   Neil Armstrong
• [PATCH v4 26/39] doc: board/qualcomm: link to APQ8016 TRM   Neil Armstrong
• [PATCH v4 11/39] gpio: qcom_pmic: add pinctrl driver   Neil Armstrong
• [PATCH v4 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Neil Armstrong
• [PATCH] configs: khadas-vim3*_android: fix AVB oom error   Neil Armstrong
• [PATCH v1 0/3] board: amlogic: jethubj100: small updates   Neil Armstrong
• [PATCH 0/8] Add support for Qualcomm SA8155-ADP board   Volodymyr Babchuk
• [PATCH 1/8] clk: qcom: clear div mask before assigning new divider   Volodymyr Babchuk
• [PATCH 2/8] dts: qcom: import device trees and bindings for SA8155P-ADP   Volodymyr Babchuk
• [PATCH 3/8] net: dw_eth_qos: add support for Qualcomm SM8150 SoC   Volodymyr Babchuk
• [PATCH 4/8] clk: qcom: add support for power domains uclass   Volodymyr Babchuk
• [PATCH 5/8] clk: qcom: add driver for SM8150 SoC   Volodymyr Babchuk
• [PATCH 6/8] pinctr: qcom: pass pin number to get_function_mux callback   Volodymyr Babchuk
• [PATCH 7/8] pinctrl: qcom: add driver for SM8150 SoC   Volodymyr Babchuk
• [PATCH 8/8] board: add support for Qualcomm SA8155P-ADP board   Volodymyr Babchuk
• u-boot on iMX.RT117x NOR   Alon Bar-Lev
• [PATCH 1/3] ARM: renesas: Disable EFI on R-Car Gen2   Paul Barker
• [PATCH 2/3] ARM: renesas: Set R-Car Gen2 board size limit to 512 kiB   Paul Barker
• [PATCH 3/3] ARM: renesas: Enable LTO on R-Car   Paul Barker
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Paul Barker
• [PATCH 1/2] doc: Update our clang documentation to reflect current status   Paul Barker
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Paul Barker
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Paul Barker
• [PATCH 3/5] i2c: rzg2l: Add I2C driver for RZ/G2L family   Paul Barker
• [PATCH] mmc: Drop unused mmc_send_tuning() cmd_error parameter   Paul Barker
• [PATCH 1/3] mmc: Convert hs400_tuning flag from u8 to bool   Paul Barker
• [PATCH 2/3] mmc: Add generic tuning flag   Paul Barker
• [PATCH 3/3] mmc: renesas-sdhi: Do not access SCC during tuning in send_cmd callback   Paul Barker
• [PATCH] mmc: tmio: Check INFO1 for completion during DMA transfer   Paul Barker
• [PATCH] mmc: renesas-sdhi: Stop transmission in case tuning block transfer fails   Paul Barker
• [PATCH] mmc: Drop unused mmc_send_tuning() cmd_error parameter   Paul Barker
• [PATCH 1/3] mmc: Convert hs400_tuning flag from u8 to bool   Paul Barker
• [PATCH v2 0/7] Add i2c and reset support for Renesas RZ/G2L   Paul Barker
• [PATCH v2 1/7] clk: renesas: Confirm all clock & reset changes on RZ/G2L   Paul Barker
• [PATCH v2 2/7] arm: dts: rzg2l: Sync with Linux v6.7   Paul Barker
• [PATCH v2 3/7] i2c: rzg2l: Add I2C driver for RZ/G2L family   Paul Barker
• [PATCH v2 4/7] pmic: Add Renesas RAA215300 PMIC driver   Paul Barker
• [PATCH v2 5/7] sysreset: Support reset via Renesas RAA215300 PMIC   Paul Barker
• [PATCH v2 6/7] pmic: raa215300: Bind sysreset driver   Paul Barker
• [PATCH v2 7/7] board: rzg2l: Support reset via Renesas RAA215300 PMIC   Paul Barker
• [PATCH v2 3/7] i2c: rzg2l: Add I2C driver for RZ/G2L family   Paul Barker
• [PATCH v3 0/8] Add i2c and reset support for Renesas RZ/G2L   Paul Barker
• [PATCH v3 1/8] clk: renesas: Confirm all clock & reset changes on RZ/G2L   Paul Barker
• [PATCH v3 2/8] arm: dts: rzg2l: Sync with Linux v6.7   Paul Barker
• [PATCH v3 3/8] i2c: rzg2l: Add I2C driver for RZ/G2L family   Paul Barker
• [PATCH v3 4/8] pmic: Add Renesas RAA215300 PMIC driver   Paul Barker
• [PATCH v3 5/8] board: rzg2l: Enable access to Renesas RAA215300 PMIC   Paul Barker
• [PATCH v3 6/8] sysreset: Support reset via Renesas RAA215300 PMIC   Paul Barker
• [PATCH v3 7/8] pmic: raa215300: Bind sysreset driver   Paul Barker
• [PATCH v3 8/8] board: rzg2l: Support reset via Renesas RAA215300 PMIC   Paul Barker
• [PATCH v6 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Paul Barker
• [PATCH v6 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Paul Barker
• [PATCH 0/3] Fix driver for misc/atsha204a   Michał Barnaś
• [PATCH 1/3] misc: atsha204a: remove broken for loop   Michał Barnaś
• [PATCH 2/3] misc: atsha204a: fix sleep function   Michał Barnaś
• [PATCH 3/3] misc: atsha204a: fix wakeup function   Michał Barnaś
• [PATCH 0/2] arm: socfpga: arria10: allow to reprogram FPGA with warm reboot   Michał Barnaś
• [PATCH 1/2] arm: socfpga: arria10: add option to reprogram the FPGA every reboot   Michał Barnaś
• [PATCH 2/2] chameleonv3: set in defconfig for FPGA to reprogram every reboot   Michał Barnaś
• [PATCH 0/2] arm: socfpga: arria10: allow to reprogram FPGA with warm reboot   Michał Barnaś
• [PATCH] virtio: fix get_config / set_config for legacy VirtIO targets   Dmitry Baryshkov
• [PATCH] virtio: fix get_config / set_config for legacy VirtIO targets   Dmitry Baryshkov
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Marek Behún
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Marek Behún
• [PATCH v4] rng: Add Turris Mox rTWM RNG driver   Marek Behún
• [PATCH v1] doc: imx: imxrt1170: Document imxrt1170-evk board   Giulio Benetti
• [PATCH] arm: mach-k3: Refactor QoS settings   Aradhya Bhatia
• [PATCH] arm: mach-k3: Refactor QoS settings   Aradhya Bhatia
• [PATCH v2] arm: mach-k3: Refactor QoS settings   Aradhya Bhatia
• [PATCH v2] arm: mach-k3: Refactor QoS settings   Aradhya Bhatia
• [PATCH] mtd: spi-nor: Add NO_CHIP_ERASE flag   Tejas Bhumkar
• [PATCH] mtd: spi-nor: ids: Enable Octal read for IS25LX512M flash   Tejas Bhumkar
• [PATCH] efi_loader : Suppress error print message   Bhumkar, Tejas Arvind
• [PATCH v2] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Ard Biesheuvel
• Booting from NFSv4 file system?   Cedric Blancher
• Booting from NFSv4 file system?   Cedric Blancher
• [PATCH v1 0/3] board: amlogic: jethubj100: small updates   Viacheslav Bocharov
• [PATCH v1 1/3] board: amlogic: jethubj100: fix common config header   Viacheslav Bocharov
• [PATCH v1 2/3] board: amlogic: jethubj100: update MAINTAINERS   Viacheslav Bocharov
• [PATCH v1 3/3] board: amlogic: jethubj100: update docs   Viacheslav Bocharov
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Fathi Boudra
• [PATCH v2] FWU: developerbox: read boot index from NOR flash   Jassi Brar
• [PATCH] arm: dts: k3-am62p5: enable the wkup i2c bus   Bryan Brattlof
• [PATCH v2 00/13] Introduce basic support for TI's AM62Px SoC family   Bryan Brattlof
• [PATCH v2 01/13] soc: add info to identify the am62p SoC family   Bryan Brattlof
• [PATCH v2 02/13] power: domain: ti: use IS_ENABLED macro   Bryan Brattlof
• [PATCH v2 03/13] arm: mach-k3: am62px: introduce clock and device files for wkup spl   Bryan Brattlof
• [PATCH v2 04/13] ram: k3-ddrss: enable the am62ax's DDR controller for am62px   Bryan Brattlof
• [PATCH v2 05/13] arm: mach-k3: invert logic for split DM firmware config   Bryan Brattlof
• [PATCH v2 06/13] arch: mach-k3: introduce basic files to support the am62px SoC family   Bryan Brattlof
• [PATCH v2 07/13] board: ti: introduce basic board files for the am62px family   Bryan Brattlof
• [PATCH v2 08/13] firmware: ti_sci_static_data: add static DMA channel data   Bryan Brattlof
• [PATCH v2 09/13] dma: ti: k3-udma: Add DMA PSIL mappings for AM62P and J722S   Bryan Brattlof
• [PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files   Bryan Brattlof
• [PATCH v2 11/13] Makefile: remove hardcoded device tree source directory   Bryan Brattlof
• [PATCH v2 12/13] configs: introduce configs needed for the am62px   Bryan Brattlof
• [PATCH v2 13/13] doc: board: ti: introduce am62px documentation   Bryan Brattlof
• [PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files   Bryan Brattlof
• [PATCH v2 00/13] Introduce basic support for TI's AM62Px SoC family   Bryan Brattlof
• [PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files   Bryan Brattlof
• [PATCH v2 05/13] arm: mach-k3: invert logic for split DM firmware config   Bryan Brattlof
• [PATCH v2] arm: mach-k3: Refactor QoS settings   Bryan Brattlof
• [PATCH v3 00/13] Hello Again Everyone!   Bryan Brattlof
• [PATCH v3 01/13] soc: add info to identify the am62p SoC family   Bryan Brattlof
• [PATCH v3 02/13] power: domain: ti: use IS_ENABLED macro   Bryan Brattlof
• [PATCH v3 03/13] arm: mach-k3: am62px: introduce clock and device files for wkup spl   Bryan Brattlof
• [PATCH v3 04/13] ram: k3-ddrss: enable the am62ax's DDR controller for am62px   Bryan Brattlof
• [PATCH v3 05/13] arm: mach-k3: invert logic for split DM firmware config   Bryan Brattlof
• [PATCH v3 06/13] arch: mach-k3: introduce basic files to support the am62px SoC family   Bryan Brattlof
• [PATCH v3 07/13] board: ti: introduce basic board files for the am62px family   Bryan Brattlof
• [PATCH v3 08/13] firmware: ti_sci_static_data: add static DMA channel data   Bryan Brattlof
• [PATCH v3 09/13] dma: ti: k3-udma: Add DMA PSIL mappings for AM62P and J722S   Bryan Brattlof
• [PATCH v3 10/13] arm: dts: introduce am62p5 U-Boot dts files   Bryan Brattlof
• [PATCH v3 11/13] Makefile: remove hardcoded device tree source directory   Bryan Brattlof
• [PATCH v3 12/13] configs: introduce configs needed for the am62px   Bryan Brattlof
• [PATCH v3 13/13] doc: board: ti: introduce am62px documentation   Bryan Brattlof
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Ian Campbell
• [PATCH] starfive: visionfive2: switch to standard boot   Nam Cao
• [PATCH] bootstd: support scanning a single partition   Nam Cao
• [RFC PATCH v2 2/2] board: ad401: example of fastboot oem board realization   Dan Carpenter
• [PATCH 1/3] usb: dwc3: handle return value of clk_get_rate() correctly   Dan Carpenter
• [PATCH] net: macb: Add support for fixed link   Dan Carpenter
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Dan Carpenter
• [PATCH] net: phy: ncsi: Correct the endian of the checksum   Dan Carpenter
• [PATCH v2 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2   Dan Carpenter
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Dan Carpenter
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Dan Carpenter
• [PATCH] command: add FDT setup for bootelf by flag   Dan Carpenter
• [PATCH v3 2/3] board: Add support for Sielaff i.MX6 Solo board   Dan Carpenter
• [PATCH v4 03/39] mmc: msm_sdhci: use modern clock handling   Dan Carpenter
• [PATCH v3 2/3] board: Add support for Sielaff i.MX6 Solo board   Dan Carpenter
• [PATCH] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Dan Carpenter
• [PATCH v2] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Dan Carpenter
• [PATCH] video: simplefb: modernise DT parsing   Dan Carpenter
• [PATCH] initcall: break loop immediately on failure   Dan Carpenter
• [PATCH] implement policy_pcr commands to lock NV-indexes behind a PCR   Dan Carpenter
• [PATCH] bootflow: Fix build error when BOOTMETH_CROS is disabled   Dan Carpenter
• [PATCH] bootstd: fix build error when CONFIG_MMC is disabled   Dan Carpenter
• [PATCH] ARM: Enable CONFIG_64BIT for static analysis   Dan Carpenter
• [PATCH] ARM: Enable CONFIG_64BIT for static analysis   Dan Carpenter
• [PATCH v1 5/5] power: regulator: tps65941: Add TPS65224 PMIC regulator support   Dan Carpenter
• [PATCH RESEND] serial: pl01x: set baudrate when probing   Dan Carpenter
• [PATCH 05/10] mach-snapdragon: Update gd->ram_size in msm_fixup_memory   Dan Carpenter
• [PATCH 1/2] opos6uldev: make the LCD work again   Dan Carpenter
• ECDSA related PRs   Dan Carpenter
• [PATCH 4/8] clk: qcom: add support for power domains uclass   Dan Carpenter
• [PATCH 00/10] Add AVS support for J721S2   Manorit Chawdhry
• [PATCH 01/10] arm: dts: k3-j721s2*: Sync with 6.8-rc1   Manorit Chawdhry
• [PATCH 02/10] arm: dts: k3-am68*: Sync with 6.8-rc1   Manorit Chawdhry
• [PATCH 03/10] drivers: misc: k3_avs: Use soc_match_device instead of compatible.   Manorit Chawdhry
• [PATCH 04/10] drivers: misc: k3_avs: Check return code while programming AVS   Manorit Chawdhry
• [PATCH 05/10] drivers: misc: k3_avs: Add AVS Support for J721S2.   Manorit Chawdhry
• [PATCH 06/10] drivers: power: pmic: Fix compatible for J721S2   Manorit Chawdhry
• [PATCH 07/10] arm: mach-k3: j721s2_init: Initialize AVS Class 0   Manorit Chawdhry
• [PATCH 08/10] arm: dts: j721s2: Add VTM node in R5   Manorit Chawdhry
• [PATCH 09/10] DONOTMERGE: arm: dts: j721s2: Fix Power domain for VTM node.   Manorit Chawdhry
• [PATCH 10/10] configs: j721s2_evm_r5_defconfig: Add AVS Configs   Manorit Chawdhry
• [PATCH 00/10] Add AVS support for J721S2   Manorit Chawdhry
• [PATCH 02/10] arm: dts: k3-am68*: Sync with 6.8-rc1   Manorit Chawdhry
• [PATCH 09/10] DONOTMERGE: arm: dts: j721s2: Fix Power domain for VTM node.   Manorit Chawdhry
• [PATCH 2/6] arm: mach-k3: Add config option for setting OP-TEE address   Manorit Chawdhry
• [PATCH 4/6] arm: mach-k3: am62: Fixup TF-A/OP-TEE reserved-memory node in FDT   Manorit Chawdhry
• [PATCH v2 1/1] drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA   Chee, Tien Fong
• [PATCH v1 1/1] arch:arm: Agilex5 enablement   Chee, Tien Fong
• [PATCH] net: phy: ncsi: Correct the endian of the checksum   Jacky Chou
• [PATCH] net: phy: ncsi: reslove the unaligned access issue   Jacky Chou
• [PATCH 00/15] rockchip: rk3328: Update defconfigs, DTs and enable boot from SPI   John Clark
• [PATCH 1/5] usb: dwc3-generic: implement Qualcomm wrapper   Caleb Connolly
• [PATCH v3 03/36] mmc: msm_sdhci: use modern clock handling   Caleb Connolly
• [PATCH v3 17/36] mach-snapdragon: generalise board support   Caleb Connolly
• [PATCH v3 20/36] mach-snapdragon: carve out no-map regions   Caleb Connolly
• [PATCH] button: qcom-pmic: demote "unknown button" message to debug   Caleb Connolly
• [PATCH v3 27/36] dts: msm8916: replace with upstream DTS   Caleb Connolly
• [PATCH] test: dm: add button_cmd test   Caleb Connolly
• [PATCH] button: qcom-pmic: fix some error checking   Caleb Connolly
• [PATCH v4 00/39] Qualcomm generic board support   Caleb Connolly
• [PATCH v4 01/39] arm: init: export prev_bl_fdt_addr   Caleb Connolly
• [PATCH v4 02/39] usb: dwc3-generic: support external vbus regulator   Caleb Connolly
• [PATCH v4 03/39] mmc: msm_sdhci: use modern clock handling   Caleb Connolly
• [PATCH v4 04/39] dt-bindings: drop msm_sdhci binding   Caleb Connolly
• [PATCH v4 05/39] clk/qcom: use upstream compatible properties   Caleb Connolly
• [PATCH v4 06/39] clock/qcom: qcs404: fix clk_set_rate   Caleb Connolly
• [PATCH v4 07/39] serial: msm: add debug UART   Caleb Connolly
• [PATCH v4 08/39] serial: msm: fix clock handling and pinctrl   Caleb Connolly
• [PATCH v4 09/39] gpio: qcom_pmic: 1-based GPIOs   Caleb Connolly
• [PATCH v4 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Caleb Connolly
• [PATCH v4 11/39] gpio: qcom_pmic: add pinctrl driver   Caleb Connolly
• [PATCH v4 12/39] sandbox: dts: fix qcom pmic gpio   Caleb Connolly
• [PATCH v4 13/39] pinctrl: qcom: stub support for special GPIOs   Caleb Connolly
• [PATCH v4 14/39] pinctrl: qcom: fix DT compatibility   Caleb Connolly
• [PATCH v4 15/39] pinctrl: qcom: apq8016: init pre-reloaction   Caleb Connolly
• [PATCH v4 16/39] board: dragonboard410c: add chainloaded config fragment   Caleb Connolly
• [PATCH v4 17/39] board: dragonboard410c: upstream DT compat   Caleb Connolly
• [PATCH v4 18/39] board: dragonboard410c: import board code from mach-snapdragon   Caleb Connolly
• [PATCH v4 19/39] board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER   Caleb Connolly
• [PATCH v4 20/39] mach-snapdragon: generalise board support   Caleb Connolly
• [PATCH v4 21/39] mach-snapdragon: dynamic load addresses   Caleb Connolly
• [PATCH v4 22/39] mach-snapdragon: generate fdtfile automatically   Caleb Connolly
• [PATCH v4 23/39] mach-snapdragon: carve out no-map regions   Caleb Connolly
• [PATCH v4 24/39] board: qcs404-evb: drop board code   Caleb Connolly
• [PATCH v4 25/39] doc: board/qualcomm: document generic targets   Caleb Connolly
• [PATCH v4 26/39] doc: board/qualcomm: link to APQ8016 TRM   Caleb Connolly
• [PATCH v4 27/39] dt-bindings: import headers for SDM845   Caleb Connolly
• [PATCH v4 28/39] dts: sdm845: import supporting dtsi files   Caleb Connolly
• [PATCH v4 29/39] dts: sdm845: replace with upstream DTS   Caleb Connolly
• [PATCH v4 30/39] dt-bindings: import headers for MSM8916   Caleb Connolly
• [PATCH v4 31/39] dts: msm8916: import PMIC dtsi files   Caleb Connolly
• [PATCH v4 32/39] dts: msm8916: replace with upstream DTS   Caleb Connolly
• [PATCH v4 33/39] dt-bindings: import headers for MSM8996   Caleb Connolly
• [PATCH v4 34/39] dts: msm8996: import PMIC dtsi files   Caleb Connolly
• [PATCH v4 35/39] dts: dragonboard820c: use correct bindings for clocks   Caleb Connolly
• [PATCH v4 36/39] dts: msm8996: replace with upstream DTS   Caleb Connolly
• [PATCH v4 37/39] dt-bindings: import headers for qcs404   Caleb Connolly
• [PATCH v4 38/39] dts: qcs404-evb: replace with upstream DT   Caleb Connolly
• [PATCH v4 39/39] MAINTAINERS: Qualcomm: add some missing paths   Caleb Connolly
• [PATCH] video: simplefb: modernise DT parsing   Caleb Connolly
• [PATCH] usb: dwc3: add newlines to dev_vdbg calls in ep0   Caleb Connolly
• [PATCH] initcall: break loop immediately on failure   Caleb Connolly
• [PATCH v4 07/39] serial: msm: add debug UART   Caleb Connolly
• [PATCH 1/1] efi_loader: simplify error message in efi_disk_create_raw()   Caleb Connolly
• [PATCH 1/1] ext4: detect directories in ext4fs_exists()   Caleb Connolly
• [PATCH v4 16/39] board: dragonboard410c: add chainloaded config fragment   Caleb Connolly
• [PULL] Please pull qcom/qcom-fixes-2024.04   Caleb Connolly
• [PATCH v5 00/39] Qualcomm generic board support   Caleb Connolly
• [PATCH v5 01/39] arm: init: export prev_bl_fdt_addr   Caleb Connolly
• [PATCH v5 02/39] usb: dwc3-generic: support external vbus regulator   Caleb Connolly
• [PATCH v5 03/39] mmc: msm_sdhci: use modern clock handling   Caleb Connolly
• [PATCH v5 04/39] dt-bindings: drop msm_sdhci binding   Caleb Connolly
• [PATCH v5 05/39] clk/qcom: use upstream compatible properties   Caleb Connolly
• [PATCH v5 06/39] clock/qcom: qcs404: fix clk_set_rate   Caleb Connolly
• [PATCH v5 07/39] serial: msm: add debug UART   Caleb Connolly
• [PATCH v5 08/39] serial: msm: fix clock handling and pinctrl   Caleb Connolly
• [PATCH v5 09/39] gpio: qcom_pmic: 1-based GPIOs   Caleb Connolly
• [PATCH v5 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Caleb Connolly
• [PATCH v5 11/39] gpio: qcom_pmic: add pinctrl driver   Caleb Connolly
• [PATCH v5 12/39] sandbox: dts: fix qcom pmic gpio   Caleb Connolly
• [PATCH v5 13/39] pinctrl: qcom: stub support for special GPIOs   Caleb Connolly
• [PATCH v5 14/39] pinctrl: qcom: fix DT compatibility   Caleb Connolly
• [PATCH v5 15/39] pinctrl: qcom: apq8016: init pre-reloaction   Caleb Connolly
• [PATCH v5 16/39] board: dragonboard410c: add chainloaded config fragment   Caleb Connolly
• [PATCH v5 17/39] board: dragonboard410c: upstream DT compat   Caleb Connolly
• [PATCH v5 18/39] board: dragonboard410c: import board code from mach-snapdragon   Caleb Connolly
• [PATCH v5 19/39] board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER   Caleb Connolly
• [PATCH v5 20/39] mach-snapdragon: generalise board support   Caleb Connolly
• [PATCH v5 21/39] mach-snapdragon: dynamic load addresses   Caleb Connolly
• [PATCH v5 22/39] mach-snapdragon: generate fdtfile automatically   Caleb Connolly
• [PATCH v5 23/39] mach-snapdragon: carve out no-map regions   Caleb Connolly
• [PATCH v5 24/39] board: qcs404-evb: drop board code   Caleb Connolly
• [PATCH v5 25/39] doc: board/qualcomm: document generic targets   Caleb Connolly
• [PATCH v5 26/39] doc: board/qualcomm: link to APQ8016 TRM   Caleb Connolly
• [PATCH v5 27/39] dt-bindings: import headers for SDM845   Caleb Connolly
• [PATCH v5 28/39] dts: sdm845: import supporting dtsi files   Caleb Connolly
• [PATCH v5 29/39] dts: sdm845: replace with upstream DTS   Caleb Connolly
• [PATCH v5 30/39] dt-bindings: import headers for MSM8916   Caleb Connolly
• [PATCH v5 31/39] dts: msm8916: import PMIC dtsi files   Caleb Connolly
• [PATCH v5 32/39] dts: msm8916: replace with upstream DTS   Caleb Connolly
• [PATCH v5 33/39] dt-bindings: import headers for MSM8996   Caleb Connolly
• [PATCH v5 34/39] dts: msm8996: import PMIC dtsi files   Caleb Connolly
• [PATCH v5 35/39] dts: dragonboard820c: use correct bindings for clocks   Caleb Connolly
• [PATCH v5 36/39] dts: msm8996: replace with upstream DTS   Caleb Connolly
• [PATCH v5 37/39] dt-bindings: import headers for qcs404   Caleb Connolly
• [PATCH v5 38/39] dts: qcs404-evb: replace with upstream DT   Caleb Connolly
• [PATCH v5 39/39] MAINTAINERS: Qualcomm: add some missing paths   Caleb Connolly
• [PATCH 00/10] Add initial support for IPQ9574 based boards   Caleb Connolly
• [PATCH 01/10] mach-snapdragon: Add support for IPQ9574   Caleb Connolly
• [PATCH 03/10] clk/qcom: Add support for clock registers in IPQ9574   Caleb Connolly
• [PATCH 04/10] clk/qcom: Include IPQ9574   Caleb Connolly
• [PATCH 06/10] pinctrl: qcom: Add support for 'pull-down'   Caleb Connolly
• [PATCH 07/10] pinctrl: qcom: Include IPQ9574   Caleb Connolly
• [PATCH 08/10] mmc: msm_sdhci: Handle different vendor cap register offsets   Caleb Connolly
• [PATCH 09/10] mmc: msm_sdhci: Reset clocks before reconfiguration   Caleb Connolly
• [PATCH 10/10] board: qualcomm: Add support for IPQ9574 RDP433   Caleb Connolly
• [PATCH 02/10] mach-snapdragon: ipq9574: Add SMEM defines needed for IPQ9574   Caleb Connolly
• [RFC PATCH 2/6] arm: clean up v7 and v8 linker scripts for bss_start/end   Caleb Connolly
• [PATCH v2] arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO configs   Philippe Coval
• [PATCH] clk: Revise help text for clk_get_parent_rate()   Alexander Dahl
• [PATCH] doc: develop: commands: Fix function prototype   Alexander Dahl
• [PATCH v2 3/7] i2c: rzg2l: Add I2C driver for RZ/G2L family   Biju Das
• [PATCH 1/2] arm: dts: k3-am64: Sync with kernel v6.7-rc1   Andrew Davis
• [PATCH 2/2] arm: dts: k3-am64: Sync with kernel v6.8-rc1   Andrew Davis
• [PATCH 1/6] arm: mach-k3: Move SYS_K3_SPL_ATF definition into R5 Kconfig   Andrew Davis
• [PATCH 2/6] arm: mach-k3: Move disable_linefill_optimization() into R5 directory   Andrew Davis
• [PATCH 3/6] arm: mach-k3: Move tispl.bin loading into R5 directory   Andrew Davis
• [PATCH 4/6] arm: mach-k3: am62a7: Disable firewalls only after loading SYSFW   Andrew Davis
• [PATCH 5/6] arm: mach-k3: Move firewall removal into R5 directory   Andrew Davis
• [PATCH 6/6] arm: mach-k3: Move ARM64 specific code into new arm64 directory   Andrew Davis
• [PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files   Andrew Davis
• [PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files   Andrew Davis
• [PATCH v2 05/13] arm: mach-k3: invert logic for split DM firmware config   Andrew Davis
• [PATCH] arm: mach-k3: Refactor QoS settings   Andrew Davis
• [PATCH 02/10] arm: dts: k3-am68*: Sync with 6.8-rc1   Andrew Davis
• [PATCH 2/2] ti: keystone2: Move common Kconfig selections to under ARCH_KEYSTONE   Andrew Davis
• [PATCH 0/6] Move DRAM address of ATF   Andrew Davis
• [PATCH 1/6] arm: mach-k3: Add default ATF location for AM62/AM62a   Andrew Davis
• [PATCH 2/6] arm: mach-k3: Add config option for setting OP-TEE address   Andrew Davis
• [PATCH 3/6] arm: mach-k3: am62: Enable OF_SYSTEM_SETUP for all boards   Andrew Davis
• [PATCH 4/6] arm: mach-k3: am62: Fixup TF-A/OP-TEE reserved-memory node in FDT   Andrew Davis
• [PATCH 5/6] arm: mach-k3: am62a: Fixup TF-A/OP-TEE reserved-memory node in FDT   Andrew Davis
• [PATCH 6/6] arm: mach-k3: Move DRAM address of ATF for AM62/AM62a   Andrew Davis
• [PATCH 6/6] arm: mach-k3: Move DRAM address of ATF for AM62/AM62a   Andrew Davis
• [RFC PATCH 1/4] configs: j721e_sk: Move to separate defconfig for J721E SK board   Andrew Davis
• [PATCH v10 14/15] configs: am69_sk: Add defconfig for AM69 SK board   Andrew Davis
• [PATCH] stm32mp: cmd_stm32prog: add dependencies with USB_GADGET_DOWNLOAD   Patrick Delaunay
• [PATCH 1/5] configs: zynqmp: don't remove power-domains for spl device tree   Steffen Dirkwinkel
• [PATCH 2/5] mmc: zynq-sdhci: refactor tapdelay settings   Steffen Dirkwinkel
• [PATCH 3/5] mmc: zynq_sdhci: disable ITAPDLYENA for zero itap_delay   Steffen Dirkwinkel
• [PATCH 4/5] mmc: zynq_sdhci: disable OTAPDLYENA   Steffen Dirkwinkel
• [PATCH 5/5] zynqmp: boot without delay in psu_uboot_init   Steffen Dirkwinkel
• [PATCH v1 0/2] arm: mach-k3: am62: Fixup thermal zone critical points   Francesco Dolcini
• [PATCH v1 1/2] arm: mach-k3: am62: Get soc max temperature by grade   Francesco Dolcini
• [PATCH v1 2/2] arm: mach-k3: am62: Fixup thermal zone critical points   Francesco Dolcini
• [PATCH v1] Revert "board: verdin-am62: set cpu core voltage depending on speed grade"   Francesco Dolcini
• [PATCH 6/6] arm: mach-k3: Move DRAM address of ATF for AM62/AM62a   Francesco Dolcini
• verdin-imx8mp: Ethernet does not load at boot   Francesco Dolcini
• [PATCH] arm: dts: k3-am625-verdin-r5: Change CPU frequency to 1000MHz   Francesco Dolcini
• [PATCH] arm: dts: k3-am625-verdin-r5: Change CPU frequency to 1000MHz   Francesco Dolcini
• [PATCH v1 0/7] toradex: fix reset and hardware detection regressions   Francesco Dolcini
• [PATCH v1 1/7] toradex: Fix recursive call to checkboard   Francesco Dolcini
• [PATCH v1 2/7] toradex: Remove not necessary model prints from checkboard()   Francesco Dolcini
• [PATCH v1 3/7] toradex: common: Use SETTINGS_R event to read toradex config block   Francesco Dolcini
• [PATCH v1 4/7] arm: dts: Refactor device trees using "&{/aliases}" syntax   Francesco Dolcini
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Francesco Dolcini
• [PATCH v1 6/7] toradex: common: Use random mac address if toradex config block is missing   Francesco Dolcini
• [PATCH v1 7/7] toradex: imx6*: fix reset using wdt-reboot driver   Francesco Dolcini
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Francesco Dolcini
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Francesco Dolcini
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Francesco Dolcini
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Francesco Dolcini
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Francesco Dolcini
• [PATCH v1 6/7] toradex: common: Use random mac address if toradex config block is missing   Francesco Dolcini
• [PATCH v2 0/7] toradex: fix reset and hardware detection regressions   Francesco Dolcini
• [PATCH v2 1/7] toradex: Fix recursive call to checkboard   Francesco Dolcini
• [PATCH v2 2/7] toradex: Remove not necessary model prints from checkboard()   Francesco Dolcini
• [PATCH v2 3/7] toradex: common: Use SETTINGS_R event to read toradex config block   Francesco Dolcini
• [PATCH v2 4/7] arm: dts: Refactor device trees using "&{/aliases}" syntax   Francesco Dolcini
• [PATCH v2 5/7] toradex: common: Add sysinfo driver   Francesco Dolcini
• [PATCH v2 6/7] toradex: common: Use random mac address if toradex config block is missing   Francesco Dolcini
• [PATCH v2 7/7] toradex: imx6*: fix reset using wdt-reboot driver   Francesco Dolcini
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Conor Dooley
• riscv: supports_extension() broken for long isa strings   Conor Dooley
• [PATCH] mtd: spi-nor-ids: Add Puya Semiconductor chips description   Dmitry Dunaev
• [RFC PATCH 0/6] Clean up arm linker scripts   Sam Edwards
• [PATCH v2 0/2] *** Add support for phyCORE-AM64x ***   Wadim Egorov
• [PATCH v2 1/2] board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM   Wadim Egorov
• [PATCH v2 2/2] doc: board: phytec: Add phyCORE-AM64x   Wadim Egorov
• [PATCH 0/2] *** Introduce get_boot_device() for K3 platform ***   Wadim Egorov
• [PATCH 1/2] arm: mach-k3: am625: copy bootindex to OCRAM for main domain SPL   Wadim Egorov
• [PATCH 2/2] arm: mach-k3: am625: Provide a way to obtain boot device for non SPLs   Wadim Egorov
• [PATCH v2 2/2] doc: board: phytec: Add phyCORE-AM64x   Wadim Egorov
• [PATCH v3 0/2] *** Add support for phyCORE-AM64x ***   Wadim Egorov
• [PATCH v3 1/2] board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM   Wadim Egorov
• [PATCH v3 2/2] doc: board: phytec: Add phyCORE-AM64x   Wadim Egorov
• [PATCH] doc: board: phytec: phycore-am62x: Update artifact names   Wadim Egorov
• Warning: eth0 MAC addresses don't match:   Embedded
• [PATCH 1/2] mx6sabresd: Fix U-Boot corruption after saving the environment   Fabio Estevam
• [PATCH 2/2] mx6sabresd: Convert to watchdog driver model   Fabio Estevam
• [PATCH v2 1/3] mx6sabresd: Fix U-Boot corruption after saving the environment   Fabio Estevam
• [PATCH v2 2/3] mx6sabresd: Convert to watchdog driver model   Fabio Estevam
• [PATCH v2 3/3] mx6sabresd: Remove board_phy_config()   Fabio Estevam
• [PATCH v2 2/3] mx6sabresd: Convert to watchdog driver model   Fabio Estevam
• [PATCH 0/5] update venice dts   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• [PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH] imx9: clock: Fix board_interface_eth_init for FEC   Fabio Estevam
• [PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Fabio Estevam
• [PATCH] toradex: tdx-cfg-block: add 0086 i.mx8m mini sku   Fabio Estevam
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Fabio Estevam
• [PATCH v1 2/2] imx: imx8: print reset cause   Fabio Estevam
• [PATCH v2 1/3] mx6sabresd: Fix U-Boot corruption after saving the environment   Fabio Estevam
• [PATCH v3 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2   Fabio Estevam
• Pull request: Please pull u-boot-imx-master-20240208   Fabio Estevam
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Fabio Estevam
• [PATCH 1/2] board: imx93_var_som: Probe ELE MU   Fabio Estevam
• [PATCH] spi: mxc_spi: Add imx6ul-ecspi compatible string   Fabio Estevam
• [PATCH] ARM: imx: Let SPL configure ECSPI1 clock on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Fabio Estevam
• [PATCH 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Fabio Estevam
• [PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH 2/3] board: Add support for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Fabio Estevam
• [PATCH] ARM: imx: Let SPL configure ECSPI1 clock on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH v2] spi: mxc_spi: Add imx6ul-ecspi compatible string   Fabio Estevam
• [PATCH v2 0/3] imx93_var_som: Enable AHAB support   Fabio Estevam
• Pull request: Please pull u-boot-imx-master-20240212   Fabio Estevam
• [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL   Fabio Estevam
• [PATCH 2/5] msc_sm2s_imx8mp: Make Ethernet functional   Fabio Estevam
• [PATCH 3/5] imx8mp-msc-sm2s: Add mmc aliases   Fabio Estevam
• [PATCH 4/5] msc_sm2s_imx8mp: Add redundant environment support   Fabio Estevam
• [PATCH 5/5] msc_sm2s_imx8mp: Fix CONFIG_DEFAULT_FDT_FILE   Fabio Estevam
• [PATCH 2/3] board: Add support for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH v2 2/3] board: Add support for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH v2 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH v2 2/3] board: Add support for Sielaff i.MX6 Solo board   Fabio Estevam
• [PATCH v3 1/3] arm: dts: imxrt: Add binman support   Fabio Estevam
• [PATCH v3 1/3] arm: dts: imxrt: Add binman support   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240219   Fabio Estevam
• [PATCH] MAINTAINERS: Update after GEHC spin-off   Fabio Estevam
• [PATCH v4 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Fabio Estevam
• EXT: [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL   Fabio Estevam
• [PATCH] usb: ehci-mx6: Add i.MX93 support   Fabio Estevam
• [PATCH v2] usb: ehci-mx6: Add i.MX93 support   Fabio Estevam
• [PATCH v3 1/3] arm: dts: imxrt: Add binman support   Fabio Estevam
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Fabio Estevam
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• ECDSA related PRs   Fabio Estevam
• [PATCH] imx53-qsb: Convert to watchdog driver model   Fabio Estevam
• [PATCH v2] arm64: zynqmp: Support semihosting boot method   Fabio Estevam
• [PATCH 1/1] opos6uldev: Convert to watchdog driver model   Fabio Estevam
• [PATCH v2 0/7] toradex: fix reset and hardware detection regressions   Fabio Estevam
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH] board: imx6dl-sielaff: spl.c: Remove multiline string   Fabio Estevam
• [PATCH 0/5] imx93_var_som: Add USB support.   Fabio Estevam
• [PATCH 0/3] Enable IMX_TMU driver for PHYTEC boards   Fabio Estevam
• [PATCH] imx53-qsb: Convert to watchdog driver model   Fabio Estevam
• [PATCH 1/1] opos6uldev: Convert to watchdog driver model   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240224   Fabio Estevam
• [GIT PULL] please pull fsl-qoriq-2024-2-8   Peng Fan
• [PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Primoz Fiser
• [PATCH] arm: imx: imx8m: Enable the SError exception   Adam Ford
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Adam Ford
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Adam Ford
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Adam Ford
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Jerome Forissier
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Neha Malcom Francis
• [PATCH 1/6] arm: mach-k3: Add default ATF location for AM62/AM62a   Neha Malcom Francis
• [PATCH 2/6] arm: mach-k3: Add config option for setting OP-TEE address   Neha Malcom Francis
• [PATCH 4/6] arm: mach-k3: am62: Fixup TF-A/OP-TEE reserved-memory node in FDT   Neha Malcom Francis
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Neha Malcom Francis
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Neha Malcom Francis
• [PATCH] arch: mach-k3: fix mapping higher DDR addresses as device memory   Neha Malcom Francis
• [PATCH] arch: mach-k3: fix mapping higher DDR addresses as device memory   Neha Malcom Francis
• [PATCH] arm: dts: k3-binman: Make optee optional as requirement   Neha Malcom Francis
• [PATCH v3 01/13] soc: add info to identify the am62p SoC family   Neha Malcom Francis
• [PATCH v3 03/13] arm: mach-k3: am62px: introduce clock and device files for wkup spl   Neha Malcom Francis
• [PATCH v3 04/13] ram: k3-ddrss: enable the am62ax's DDR controller for am62px   Neha Malcom Francis
• [PATCH v3 05/13] arm: mach-k3: invert logic for split DM firmware config   Neha Malcom Francis
• [PATCH v3 11/13] Makefile: remove hardcoded device tree source directory   Neha Malcom Francis
• [PATCH v3 11/13] Makefile: remove hardcoded device tree source directory   Neha Malcom Francis
• [RFC PATCH 0/4] Cleanup J721E EVM and SK   Neha Malcom Francis
• [RFC PATCH 1/4] configs: j721e_sk: Move to separate defconfig for J721E SK board   Neha Malcom Francis
• [RFC PATCH 2/4] tools: binman: control.py: Delete template nodes after parsing   Neha Malcom Francis
• [RFC PATCH 3/4] arm: dts: k3-j721e: Separate boot binary build   Neha Malcom Francis
• [RFC PATCH 4/4] arm: dts: k3-j721e: Move to OF_UPSTREAM   Neha Malcom Francis
• [RFC PATCH 1/4] configs: j721e_sk: Move to separate defconfig for J721E SK board   Neha Malcom Francis
• [PATCH] cmd: setexpr: fix no matching string in gsub return empty value   Lukas Funke
• [PATCH] arm64: zynqmp: Add label to pmu fwnode   Lukas Funke
• SPL cannot boot FIT image linux kernel in u-boot 2019.07   Robbe Gaeremynck
• [PATCH v2 00/21] FWU: Migrate FWU metadata to version 2   Sughosh Ganu
• [PATCH v2 01/21] configs: fwu: remove FWU configs for metadata V2 migration   Sughosh Ganu
• [PATCH v2 02/21] fwu: metadata: migrate to version 2 of the structure   Sughosh Ganu
• [PATCH v2 03/21] drivers: fwu: add the size parameter to the metadata access API's   Sughosh Ganu
• [PATCH v2 04/21] fwu: add helper functions for getting image description offsets   Sughosh Ganu
• [PATCH v2 05/21] fwu: make changes to support version 2 of FWU metadata   Sughosh Ganu
• [PATCH v2 06/21] fwu: add some API's for metadata version 2 access   Sughosh Ganu
• [PATCH v2 07/21] drivers: fwu: mtd: allocate buffer for image info dynamically   Sughosh Ganu
• [PATCH v2 08/21] drivers: fwu: allocate memory for metadata copies   Sughosh Ganu
• [PATCH v2 09/21] fwu: add a function to put a bank in Trial State   Sughosh Ganu
• [PATCH v2 10/21] capsule: accept a bank on a successful update   Sughosh Ganu
• [PATCH v2 11/21] fwu: mtd: modify the DFU API's to align with metadata version 2   Sughosh Ganu
• [PATCH v2 12/21] efi_firmware: fwu: do not read FWU metadata on sandbox   Sughosh Ganu
• [PATCH v2 13/21] efi_firmware: fwu: get the number of FWU banks at runtime   Sughosh Ganu
• [PATCH v2 14/21] cmd: fwu: align the command with metadata version 2   Sughosh Ganu
• [PATCH v2 15/21] test: fwu: align the FWU metadata access test with version 2   Sughosh Ganu
• [PATCH v2 16/21] fwu: remove the config symbols for number of banks and images   Sughosh Ganu
• [PATCH v2 17/21] tools: mkfwumdata: migrate to metadata version 2   Sughosh Ganu
• [PATCH v2 18/21] tools: mkfwumdata: add logic to append vendor data to the FWU metadata   Sughosh Ganu
• [PATCH v2 19/21] tools: mkfwumdata: fix the size parameter to the fwrite call   Sughosh Ganu
• [PATCH v2 20/21] configs: fwu: re-enable FWU configs   Sughosh Ganu
• [PATCH v2 21/21] doc: fwu: make changes for supporting FWU Metadata version 2   Sughosh Ganu
• [PATCH v2 17/21] tools: mkfwumdata: migrate to metadata version 2   Sughosh Ganu
• [PATCH v2 00/21] FWU: Migrate FWU metadata to version 2   Sughosh Ganu
• [PATCH v3 03/36] mmc: msm_sdhci: use modern clock handling   Sumit Garg
• [PATCH v3 33/36] dts: qcs404-evb: replace with upstream DT   Sumit Garg
• [PATCH v3 33/36] dts: qcs404-evb: replace with upstream DT   Sumit Garg
• [PATCH v3 35/36] pinctrl: qcom: fix DT compatibility   Sumit Garg
• [PATCH v3 06/36] clock/qcom: qcs404: fix clk_set_rate   Sumit Garg
• [PATCH v3 20/36] mach-snapdragon: carve out no-map regions   Sumit Garg
• [PATCH v3 17/36] mach-snapdragon: generalise board support   Sumit Garg
• [PATCH v3 03/36] mmc: msm_sdhci: use modern clock handling   Sumit Garg
• [PATCH v3 20/36] mach-snapdragon: carve out no-map regions   Sumit Garg
• [PATCH v2 11/13] Makefile: remove hardcoded device tree source directory   Sumit Garg
• [PATCH v2 00/13] Introduce basic support for TI's AM62Px SoC family   Sumit Garg
• [PATCH v3 27/36] dts: msm8916: replace with upstream DTS   Sumit Garg
• [PATCH v3 26/36] dts: msm8916: import PMIC dtsi files   Sumit Garg
• [PATCH] button: qcom-pmic: fix some error checking   Sumit Garg
• [PATCH v5 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v5 01/11] CI: Exclude devicetree-rebasing subtree for CONFIG checks   Sumit Garg
• [PATCH v5 02/11] Makefile: Add support for DT bindings schema checks   Sumit Garg
• [PATCH v5 03/11] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Sumit Garg
• [PATCH v5 04/11] Makefile: Allow upstream DT subtree to provide DT includes   Sumit Garg
• [PATCH v5 05/11] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v5 06/11] dts: Add script to uprev dts/upstream subtree   Sumit Garg
• [PATCH v5 07/11] doc: devicetree: Align documentation to use Kconfig options   Sumit Garg
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v5 09/11] MAINTAINERS: Add myself as devicetree-rebasing maintainer   Sumit Garg
• [PATCH v5 10/11] dts: meson-gxbb: Switch to using upstream DT   Sumit Garg
• [PATCH v5 11/11] dts: meson-gxbb: Drop redundant devicetree files   Sumit Garg
• [PATCH v5 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v5 06/11] dts: Add script to uprev dts/upstream subtree   Sumit Garg
• [PATCH] button: qcom-pmic: demote "unknown button" message to debug   Sumit Garg
• [PATCH v5 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v5 06/11] dts: Add script to uprev dts/upstream subtree   Sumit Garg
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v5 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH] qcom_defconfig: Enable ethernet and I2C support   Sumit Garg
• [PATCH v4 00/39] Qualcomm generic board support   Sumit Garg
• [PATCH v4 01/39] arm: init: export prev_bl_fdt_addr   Sumit Garg
• [PATCH v4 03/39] mmc: msm_sdhci: use modern clock handling   Sumit Garg
• [PATCH v4 04/39] dt-bindings: drop msm_sdhci binding   Sumit Garg
• [PATCH v4 05/39] clk/qcom: use upstream compatible properties   Sumit Garg
• [PATCH v4 09/39] gpio: qcom_pmic: 1-based GPIOs   Sumit Garg
• [PATCH v4 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Sumit Garg
• [PATCH v4 06/39] clock/qcom: qcs404: fix clk_set_rate   Sumit Garg
• [PATCH v4 07/39] serial: msm: add debug UART   Sumit Garg
• [PATCH v4 08/39] serial: msm: fix clock handling and pinctrl   Sumit Garg
• [PATCH v4 11/39] gpio: qcom_pmic: add pinctrl driver   Sumit Garg
• [PATCH v4 12/39] sandbox: dts: fix qcom pmic gpio   Sumit Garg
• [PATCH v4 15/39] pinctrl: qcom: apq8016: init pre-reloaction   Sumit Garg
• [PATCH 0/7] imx8mp: Enable PCIe/NVMe support   Sumit Garg
• [PATCH 1/7] clk: imx8mp: Add support for PCIe clocks   Sumit Garg
• [PATCH 2/7] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH 3/7] imx8mp: power-domain: Add PCIe support   Sumit Garg
• [PATCH 4/7] imx8mp: power-domain: Expose high performance PLL clock   Sumit Garg
• [PATCH 5/7] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH 6/7] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH v4 13/39] pinctrl: qcom: stub support for special GPIOs   Sumit Garg
• [PATCH v4 14/39] pinctrl: qcom: fix DT compatibility   Sumit Garg
• [PATCH v4 16/39] board: dragonboard410c: add chainloaded config fragment   Sumit Garg
• [PATCH v4 17/39] board: dragonboard410c: upstream DT compat   Sumit Garg
• [PATCH v4 18/39] board: dragonboard410c: import board code from mach-snapdragon   Sumit Garg
• [PATCH v4 19/39] board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER   Sumit Garg
• [PATCH v4 20/39] mach-snapdragon: generalise board support   Sumit Garg
• [PATCH v4 21/39] mach-snapdragon: dynamic load addresses   Sumit Garg
• [PATCH v4 22/39] mach-snapdragon: generate fdtfile automatically   Sumit Garg
• [PATCH v4 23/39] mach-snapdragon: carve out no-map regions   Sumit Garg
• [PATCH v4 24/39] board: qcs404-evb: drop board code   Sumit Garg
• [PATCH v4 25/39] doc: board/qualcomm: document generic targets   Sumit Garg
• [PATCH v4 07/39] serial: msm: add debug UART   Sumit Garg
• [PATCH v4 26/39] doc: board/qualcomm: link to APQ8016 TRM   Sumit Garg
• [PATCH v4 27/39] dt-bindings: import headers for SDM845   Sumit Garg
• [PATCH v4 28/39] dts: sdm845: import supporting dtsi files   Sumit Garg
• [PATCH v4 29/39] dts: sdm845: replace with upstream DTS   Sumit Garg
• [PATCH v4 32/39] dts: msm8916: replace with upstream DTS   Sumit Garg
• [PATCH v4 36/39] dts: msm8996: replace with upstream DTS   Sumit Garg
• [PATCH v4 38/39] dts: qcs404-evb: replace with upstream DT   Sumit Garg
• [PATCH v4 39/39] MAINTAINERS: Qualcomm: add some missing paths   Sumit Garg
• [PATCH v4 37/39] dt-bindings: import headers for qcs404   Sumit Garg
• [PATCH v4 35/39] dts: dragonboard820c: use correct bindings for clocks   Sumit Garg
• [PATCH v4 34/39] dts: msm8996: import PMIC dtsi files   Sumit Garg
• [PATCH v4 33/39] dt-bindings: import headers for MSM8996   Sumit Garg
• [PATCH v4 31/39] dts: msm8916: import PMIC dtsi files   Sumit Garg
• [PATCH v4 30/39] dt-bindings: import headers for MSM8916   Sumit Garg
• [PATCH 0/7] imx8mp: Enable PCIe/NVMe support   Sumit Garg
• [PATCH 2/7] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH 3/7] imx8mp: power-domain: Add PCIe support   Sumit Garg
• [PATCH 4/7] imx8mp: power-domain: Expose high performance PLL clock   Sumit Garg
• [PATCH 5/7] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH 6/7] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH v4 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH v6 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v6 01/11] CI: Exclude devicetree-rebasing subtree for CONFIG checks   Sumit Garg
• [PATCH v6 02/11] Makefile: Add support for DT bindings schema checks   Sumit Garg
• [PATCH v6 03/11] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Sumit Garg
• [PATCH v6 04/11] Makefile: Allow upstream DT subtree to provide DT includes   Sumit Garg
• [PATCH v6 05/11] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v6 06/11] dts: Add script to uprev dts/upstream subtree   Sumit Garg
• [PATCH v6 07/11] doc: devicetree: Align documentation to use Kconfig options   Sumit Garg
• [PATCH v6 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v6 09/11] MAINTAINERS: Add myself as devicetree-rebasing maintainer   Sumit Garg
• [PATCH v6 10/11] dts: meson-gxbb: Switch to using upstream DT   Sumit Garg
• [PATCH v6 11/11] dts: meson-gxbb: Drop redundant devicetree files   Sumit Garg
• [PATCH v2 0/8] imx8mp: Enable PCIe/NVMe support   Sumit Garg
• [PATCH v2 1/8] clk: imx8mp: Add support for PCIe clocks   Sumit Garg
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH v2 3/8] imx8mp: power-domain: Add PCIe support   Sumit Garg
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Sumit Garg
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH v2 7/8] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Sumit Garg
• [PATCH v2 8/8] MAINTAINERS: Add entry for PCIe DWC IMX driver   Sumit Garg
• [PATCH v2 1/8] clk: imx8mp: Add support for PCIe clocks   Sumit Garg
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH v2 3/8] imx8mp: power-domain: Add PCIe support   Sumit Garg
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Sumit Garg
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Sumit Garg
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Sumit Garg
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH v5 10/39] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Sumit Garg
• [PATCH v5 23/39] mach-snapdragon: carve out no-map regions   Sumit Garg
• [PATCH v5 07/39] serial: msm: add debug UART   Sumit Garg
• [PATCH v3 11/13] Makefile: remove hardcoded device tree source directory   Sumit Garg
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Sumit Garg
• [PATCH v10 12/15] arm: dts: Introduce am69-sk u-boot dts files   Sumit Garg
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Sumit Garg
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH v6 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH 1/2] opos6uldev: make the LCD work again   Sumit Garg
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Sumit Garg
• [PATCH 1/2] opos6uldev: make the LCD work again   Sumit Garg
• [PATCH] test: cmd: mbr: Fix Smatch static checker warning   Alexander Gendin
• [PATCH v2 2/3] arm: mvebu: helios4_defconfig: enable setexpr command   Dennis Gilmore
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Simon Glass
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Simon Glass
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Simon Glass
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Simon Glass
• [PATCH v1 4/5] power: regulator: tps65941: use function callbacks for conversion ops   Dhruva Gole
• [PATCH v2 2/2] doc: board: phytec: Add phyCORE-AM64x   Dhruva Gole
• [PATCH] doc: board: phytec: phycore-am62x: Update artifact names   Dhruva Gole
• [PATCH RFC 4/6] efi_selftest: Add international characters test   Janne Grunau
• [PATCH v2 5/6] efi_selftest: Add box drawing character selftest   Janne Grunau
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Janne Grunau
• [PATCH 3/6] usb: xhci: Abort transfers with unallocated rings   Janne Grunau
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Janne Grunau
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Janne Grunau
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Janne Grunau
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Ravi Gunasekaran
• [PATCH v4] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   Ravi Gunasekaran
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Ravi Gunasekaran
• [PATCH 1/2] net: mdio: Handle bus level GPIO Reset   Ravi Gunasekaran
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Ravi Gunasekaran
• [PATCH] poplar: add myself as co-maintainer   Shawn Guo
• [PATCH v3 0/4] phycore-imx8mp: Add USB support   Benjamin Hahn
• [PATCH v3 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2   Benjamin Hahn
• [PATCH v3 2/4] phycore-imx8mp: add USB host support   Benjamin Hahn
• [PATCH v3 3/4] phycore-imx8mp: add USB mass storage support   Benjamin Hahn
• [PATCH v3 4/4] phycore-imx8mp: add support for booting and flashing emmc via UUU   Benjamin Hahn
• [PATCH 0/3] Enable IMX_TMU driver for PHYTEC boards   Benjamin Hahn
• [PATCH 1/3] phycore-imx8mp_defconfig: Enable CONFIG_IMX_TMU   Benjamin Hahn
• [PATCH 2/3] phycore-imx8mm_defconfig: Enable CONFIG_IMX_TMU   Benjamin Hahn
• [PATCH 3/3] imx8mm-phygate-tauri-l_defconfig: Enable CONFIG_IMX_TMU   Benjamin Hahn
• [PATCH v8 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Andrew Halaney
• [PATCH 0/5] update venice dts   Tim Harvey
• [PATCH 1/5] arm: dts: imx8mm-venice-gw7901: add digital I/O direction control GPIO's   Tim Harvey
• [PATCH 2/5] arm: dts: imx8mm-venice-gw7901: add TPM device   Tim Harvey
• [PATCH 3/5] arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS   Tim Harvey
• [PATCH 4/5] arm: dts: imx8mm-venice-gw71xx: add TPM device   Tim Harvey
• [PATCH 5/5] arm: dts: imx8mp-venice-gw71xx: add TPM device   Tim Harvey
• [PATCH 0/5] update venice dts   Tim Harvey
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Tim Harvey
• How to load raw disk image in u-boot?   Sourabh Hegde
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Rob Herring
• TI LCD Driver and splash screen.   Steven Hill
• [RFC] rockchip: Reset to bootrom download mode on hang   Eugen Hristev
• [PATCH 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Jon Humphreys
• [PATCH v2 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Jon Humphreys
• [PATCH v2 3/3] arm: dts: k3-j721e-sk: Remove OSPI phypattern partition   Jon Humphreys
• [PATCH v2 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Jon Humphreys
• [PATCH 0/2] Enable OSPI on j721e   Jonathan Humphreys
• [PATCH 1/2] configs: j721e: Enable OSPI memory   Jonathan Humphreys
• [PATCH 2/2] arm: mach-k3: j721e: Enable OSPI boot   Jonathan Humphreys
• [PATCH 0/2] enable OSPI support on AM64x   Jonathan Humphreys
• [PATCH 1/2] configs: am64x_evm_*_defconfig: Enable OSPI support   Jonathan Humphreys
• [PATCH 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Jonathan Humphreys
• [PATCH v2 0/2] enable OSPI support on AM64x   Jonathan Humphreys
• [PATCH v2 1/2] configs: am64x_evm_*_defconfig: Enable OSPI support   Jonathan Humphreys
• [PATCH v2 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Jonathan Humphreys
• [PATCH v2 0/3] Enable OSPI on j721e   Jonathan Humphreys
• [PATCH v2 1/3] configs: j721e: Enable OSPI memory   Jonathan Humphreys
• [PATCH v2 2/3] arm: mach-k3: j721e: Enable OSPI boot   Jonathan Humphreys
• [PATCH v2 3/3] arm: dts: k3-j721e-sk: Remove OSPI phypattern partition   Jonathan Humphreys
• [PATCH] dts: ast2600: add x4tf dts for asus product   Kelly Hung(洪嘉莉)
• [PATCH] dts: ast2600: add x4tf dts for asus product   Kelly Hung(洪嘉莉)
• Booting RPi5B with latest git   Ivan T. Ivanov
• [PATCH 1/1] serial: move sbi_dbcn_available to .data section   Aurelien Jarno
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Hongbin Ji
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Hongbin Ji
• Booting RPi5B with latest git   John
• Booting RPi5B with latest git   John
• Booting RPi5B with latest git   John
• Booting RPi5B with latest git   Jojan
• Booting RPi5B with latest git   Jojan
• Booting RPi5B with latest git   Jojan
• [PATCH v2 13/20] rockchip: migrate hardware.h inclusion into appropriate files   Johan Jonker
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Johan Jonker
• [PATCH] poplar: add myself as co-maintainer   Jorge Ramirez-Ortiz, Gmail
• [PATCH] poplar: add myself as co-maintainer   Jorge Ramirez-Ortiz, Gmail
• [PATCH 00/10] ECC Series   Santhosh Kumar K
• [PATCH v3 0/2] arm: s5p4418: fix relocation   Minkyu Kang
• [PATCH v3 2/2] arm: s5p4418: fix relocation of vectors   Minkyu Kang
• Please pull u-boot-samsung master   Minkyu Kang
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [RFC] rockchip: spl: Support reading FIT from eMMC boot partition   Jonas Karlman
• [RFC] rockchip: Reset to bootrom download mode on hang   Jonas Karlman
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Jonas Karlman
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Jonas Karlman
• [PATCH] board: rockchip: Add Pine64 PineTab2   Jonas Karlman
• [PATCH v2 0/3] rockchip: rk35xx: Fix writing to eMMC   Jonas Karlman
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Jonas Karlman
• [PATCH v2 3/3] mmc: rockchip_sdhci: Fix HS400 mode write on RK3568   Jonas Karlman
• [RFC] rockchip: Reset to bootrom download mode on hang   Jonas Karlman
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Jonas Karlman
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH] board: rockchip: Add Pine64 PineTab2   Jonas Karlman
• [PATCH v3] rockchip: spl: Enable caches to speed up checksum validation   Jonas Karlman
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH] mmc: rockchip_sdhci: Use bounce buffer in SPL to fix read performance   Jonas Karlman
• [PATCH 00/15] rockchip: rk3328: Update defconfigs, DTs and enable boot from SPI   Jonas Karlman
• [PATCH 01/15] rockchip: rk3328: Update default u-boot, spl-boot-order prop   Jonas Karlman
• [PATCH 02/15] rockchip: rk3328-evb: Update defconfig   Jonas Karlman
• [PATCH 03/15] rockchip: rk3328-rock64: Update defconfig   Jonas Karlman
• [PATCH 04/15] rockchip: rk3328-roc-cc: Update defconfig   Jonas Karlman
• [PATCH 05/15] rockchip: rk3328-rock-pi-e: Update defconfig   Jonas Karlman
• [PATCH 06/15] rockchip: rk3328-nanopi-r2: Update defconfig   Jonas Karlman
• [PATCH 07/15] rockchip: rk3328-orangepi-r1-plus: Update defconfig   Jonas Karlman
• [PATCH 08/15] rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC   Jonas Karlman
• [PATCH 09/15] gpio: rockchip: Use gpio alias id as gpio bank id   Jonas Karlman
• [PATCH 10/15] rng: rockchip: Use same compatible as linux   Jonas Karlman
• [PATCH 11/15] rockchip: rk3328: Sync device tree from linux v6.8-rc1   Jonas Karlman
• [PATCH 12/15] Revert "rockchip: Allow booting from SPI"   Jonas Karlman
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Jonas Karlman
• [PATCH 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash   Jonas Karlman
• [PATCH 15/15] rockchip: rk3328-orangepi-r1-plus: Enable boot from SPI NOR flash   Jonas Karlman
• [PATCH 04/15] rockchip: rk3328-roc-cc: Update defconfig   Jonas Karlman
• [PATCH 10/15] rng: rockchip: Use same compatible as linux   Jonas Karlman
• [PATCH 03/15] rockchip: rk3328-rock64: Update defconfig   Jonas Karlman
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Jonas Karlman
• [PATCH 4/4] rockchip: rk3399: regenerate defconfigs   Jonas Karlman
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Jonas Karlman
• [PATCH 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash   Jonas Karlman
• [PATCH v2 15/20] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Jonas Karlman
• [PATCH v2 16/20] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Jonas Karlman
• [PATCH 0/2] rockchip: Update stack and bss addresses on RK3328 and RK3399   Jonas Karlman
• [PATCH 1/2] rockchip: rk3328: Update stack addresses   Jonas Karlman
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Jonas Karlman
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Jonas Karlman
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Jonas Karlman
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Jonas Karlman
• [PATCH v2 00/15] rockchip: rk3328: Update defconfigs, DTs and enable boot from SPI   Jonas Karlman
• [PATCH v2 01/15] rockchip: rk3328: Update default u-boot, spl-boot-order prop   Jonas Karlman
• [PATCH v2 02/15] rockchip: rk3328-evb: Update defconfig   Jonas Karlman
• [PATCH v2 03/15] rockchip: rk3328-rock64: Update defconfig   Jonas Karlman
• [PATCH v2 04/15] rockchip: rk3328-roc-cc: Update defconfig   Jonas Karlman
• [PATCH v2 05/15] rockchip: rk3328-rock-pi-e: Update defconfig   Jonas Karlman
• [PATCH v2 06/15] rockchip: rk3328-nanopi-r2: Update defconfig   Jonas Karlman
• [PATCH v2 07/15] rockchip: rk3328-orangepi-r1-plus: Update defconfig   Jonas Karlman
• [PATCH v2 08/15] rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC   Jonas Karlman
• [PATCH v2 09/15] gpio: rockchip: Use gpio alias id as gpio bank id   Jonas Karlman
• [PATCH v2 10/15] rng: rockchip: Use same compatible as linux   Jonas Karlman
• [PATCH v2 11/15] rockchip: rk3328: Sync device tree from linux v6.8-rc1   Jonas Karlman
• [PATCH v2 12/15] Revert "rockchip: Allow booting from SPI"   Jonas Karlman
• [PATCH v2 13/15] rockchip: rk3328: Add support to build bootable SPI image   Jonas Karlman
• [PATCH v2 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash   Jonas Karlman
• [PATCH v2 15/15] rockchip: rk3328-orangepi-r1-plus: Enable boot from SPI NOR flash   Jonas Karlman
• [PATCH v2 0/2] rockchip: Update stack and bss addresses on RK3328 and RK3399   Jonas Karlman
• [PATCH v2 1/2] rockchip: rk3328: Update stack addresses   Jonas Karlman
• [PATCH v2 2/2] rockchip: rk3399: Update stack and bss addresses   Jonas Karlman
• [PATCH v2 00/15] rockchip: rk3328: Update defconfigs, DTs and enable boot from SPI   Jonas Karlman
• [PATCH v4 02/39] usb: dwc3-generic: support external vbus regulator   Jonas Karlman
• [PATCH v2] pinctrl: Check pinconfig nodes pre-reloc status recursively   Jonas Karlman
• [PATCH v4] rockchip: spl: Enable caches to speed up checksum validation   Jonas Karlman
• [PATCH] dm: core: Fix address translation in devfdt_get_addr_index()   Jonas Karlman
• [PATCH 00/11] rockchip: rk3399: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 01/11] board: rockchip: rk3399: Add device tree files to MAINTAINERS   Jonas Karlman
• [PATCH 02/11] board: rockchip: rk3399: Add myself as reviewer to MAINTAINERS   Jonas Karlman
• [PATCH 03/11] board: rockchip: rk3399: Remove unused board_early_init_f functions   Jonas Karlman
• [PATCH 04/11] board: rockchip: Add a common ROCK Pi 4 target   Jonas Karlman
• [PATCH 05/11] rockchip: io-domain: Add support for RK3399   Jonas Karlman
• [PATCH 06/11] rockchip: pine64: rockpro64: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 07/11] rockchip: pine64: pinebook-pro: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 08/11] rockchip: pine64: pinephone-pro: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 09/11] rockchip: vamrs: rock960: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 10/11] rockchip: theobroma-systems: puma: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH 11/11] rockchip: google: gru: Migrate to use IO-domain driver   Jonas Karlman
• [PATCH v2 0/2] rockchip: Update stack and bss addresses on RK3328 and RK3399   Jonas Karlman
• [PATCH] mmc: rockchip_sdhci: Use bounce buffer in SPL to fix read performance   Jonas Karlman
• [PATCH v3 14/17] ARM: dts: rk3328: Enable VOP for bootph-all   Jonas Karlman
• [PATCH 05/11] rockchip: io-domain: Add support for RK3399   Jonas Karlman
• [PATCH v2 13/15] rockchip: rk3328: Add support to build bootable SPI image   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH 0/2] phy: rockchip-inno-usb2: Write to correct GRF   Jonas Karlman
• [PATCH 1/2] phy: rockchip-inno-usb2: Write to correct GRF   Jonas Karlman
• [PATCH 2/2] phy: rockchip-inno-usb2: Limit changes made to regs   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH 0/4] rockchip: Migrate to use DM_USB_GADGET on RK3328   Jonas Karlman
• [PATCH 1/4] rockchip: Update the default USB Product ID value   Jonas Karlman
• [PATCH 2/4] rockchip: board: Prepare for use of DM_USB_GADGET with DWC2_OTG   Jonas Karlman
• [PATCH 3/4] rockchip: board: Use a common USB Product ID for UMS   Jonas Karlman
• [PATCH 4/4] rockchip: Migrate to use DM_USB_GADGET on RK3328   Jonas Karlman
• [PATCH v2 05/16] power: rk8xx: add support for RK806   Jonas Karlman
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Mark Kettenis
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Mark Kettenis
• [PATCH 0/2] smbios: fill wake-up type   Mark Kettenis
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Mark Kettenis
• [PATCH] efi_loader: Don't carve out memory reservations too early   Mark Kettenis
• [PATCH] efi_loader: Don't carve out memory reservations too early   Mark Kettenis
• [PATCH v4] rockchip: spl: Enable caches to speed up checksum validation   Mark Kettenis
• [PATCH] disk: dos: Add all options for EFI System Partitions   Mark Kettenis
• [PATCH v2] disk: dos: Add all options for EFI System Partitions   Mark Kettenis
• [PATCH v2] efi_loader: Don't carve out memory reservations too early   Mark Kettenis
• [PATCH] efi_loader: Don't carve out memory reservations too early   Mark Kettenis
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Mark Kettenis
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Mark Kettenis
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Abdellatif El Khlifi
• [PATCH v1] pci-host-ecam-generic: Convert to ofnode functions   Maksim Kiselev
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Jan Kiszka
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Jan Kiszka
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Jan Kiszka
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Jan Kiszka
• [PATCH] FWU: developerbox: read boot index from NOR flash   Masahisa Kojima
• [PATCH v2] FWU: developerbox: read boot index from NOR flash   Masahisa Kojima
• [PATCH 1/1] sunxi: sun4i: add missing sdelay() to clock_init_safe()   Ludwig Kormann
• [PATCH 1/1] sunxi: sun4i: Introduce KConfig option SPL_SYS_CLK_FREQ   Ludwig Kormann
• [PATCH 03/15] rockchip: rk3328-rock64: Update defconfig   Matwey V. Kornilov
• [PATCH] rockchip: rock64: store env in SPI flash   Matwey V. Kornilov
• [PATCH 1/5] usb: dwc3-generic: implement Qualcomm wrapper   Mattijs Korpershoek
• [PATCH 2/5] usb: dwc3: select DM_USB_GADGET   Mattijs Korpershoek
• [PATCH 3/5] usb: gadget: CDC ACM: call usb_gadget_initialize   Mattijs Korpershoek
• [PATCH 4/5] usb: gadget: UMS: support multiple sector sizes   Mattijs Korpershoek
• [PATCH 5/5] iommu: qcom-smmu: fix debugging   Mattijs Korpershoek
• [PATCH] lib: sparse: Fix error checking for write_sparse_chunk_raw   Mattijs Korpershoek
• [PATCH 1/5] usb: dwc3-generic: implement Qualcomm wrapper   Mattijs Korpershoek
• [PATCH] lib: sparse: Fix error checking for write_sparse_chunk_raw   Mattijs Korpershoek
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Mattijs Korpershoek
• [PATCH v1 1/7] common: avb_verify: don't call mmc_switch_part for SD   Mattijs Korpershoek
• [PATCH v1 2/7] avb: move SPDX license itdentifiers to the first line   Mattijs Korpershoek
• [PATCH v1 3/7] common: avb_verify: rework error/debug prints   Mattijs Korpershoek
• [PATCH v1 4/7] cmd: avb: rework prints   Mattijs Korpershoek
• [PATCH v1 5/7] common: avb_verify: add str_avb_io_error/str_avb_slot_error   Mattijs Korpershoek
• [PATCH v1 7/7] doc: android: avb: add slot_suffix param details   Mattijs Korpershoek
• [PATCH] configs: khadas-vim3*_android: fix AVB oom error   Mattijs Korpershoek
• [PATCH v1 6/7] cmd: avb: rework do_avb_verify_part   Mattijs Korpershoek
• [AVB/AB] Overhaul plans   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240209   Mattijs Korpershoek
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Mattijs Korpershoek
• [PATCH v2 4/7] cmd: avb: rework prints   Mattijs Korpershoek
• [PATCH v2 7/7] doc: android: avb: sync usage details   Mattijs Korpershoek
• [RESEND PATCH v1] MAINTAINERS: add custodian tree info for AVB/AB   Mattijs Korpershoek
• [PATCH v1] MAINTAINERS: add custodian tree info for AV/AVB   Mattijs Korpershoek
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Mattijs Korpershoek
• [RESEND PATCH v1] MAINTAINERS: add custodian tree info for AVB/AB   Mattijs Korpershoek
• [PATCH v2 0/7] AVB: cosmetic adjustments/improvements   Mattijs Korpershoek
• [AVB/AB] Overhaul plans   Mattijs Korpershoek
• [RFC PATCH v2 1/2] fastboot: introduce 'oem board' subcommand   Mattijs Korpershoek
• [RFC PATCH v2 2/2] board: ad401: example of fastboot oem board realization   Mattijs Korpershoek
• [PATCH v1 3/5] cmd: optee_rpmb: build cmd for sandbox   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240215   Mattijs Korpershoek
• [PATCH 2/8] dts: qcom: import device trees and bindings for SA8155P-ADP   Krzysztof Kozlowski
• [PATCH 01/10] mach-snapdragon: Add support for IPQ9574   Krzysztof Kozlowski
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH v3] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH v1] mtd: rawnand: macronix: OTP access for MX30LFxG18AC   Arseniy Krasnov
• [PATCH v2] cmd: mtd: OTP access support   Arseniy Krasnov
• [PATCH v2] test/py: saveenv: Add a test for saveenv command   Love Kumar
• [PATCH v2] test/py: reset: Add a test for reset command   Love Kumar
• [PATCH v3] test/py: reset: Add a test for reset command   Love Kumar
• [PATCH v3] test/py: saveenv: Add a test for saveenv command   Love Kumar
• [PATCH 09/10] DONOTMERGE: arm: dts: j721s2: Fix Power domain for VTM node.   Kumar, Udit
• [PATCH] dma: ti: k3-udma: Fix ring_idx to pair k3 nav rings"   Udit Kumar
• [PATCH v2] dma: ti: k3-udma: Fix ring_idx to pair k3 nav rings   Udit Kumar
• [PATCH v2 3/3] arm: dts: k3-j721e-sk: Remove OSPI phypattern partition   Kumar, Udit
• [PATCH v2 1/3] configs: j721e: Enable OSPI memory   Kumar, Udit
• [PATCH v2 2/3] arm: mach-k3: j721e: Enable OSPI boot   Kumar, Udit
• Need help: alternative module inclusion - duplicate symbols   Michael Lawnick
• Need help: alternative module inclusion - duplicate symbols   Michael Lawnick
• HABv4 with SPL and u-boot-dtb.img on i.MX6   Benjamin Lemouzy
• HABv4 with SPL and u-boot-dtb.img on i.MX6   Benjamin Lemouzy
• [PATCH v1 1/1] arch:arm: Agilex5 enablement   Jit Loon Lim
• [PATCH v1 1/1] arch:arm: Agilex5 enablement   Lim, Jit Loon
• [PATCH v2 0/1] Agilex5 enablement   Jit Loon Lim
• [PATCH v2 1/1] arch:arm: Agilex5 enablement   Jit Loon Lim
• [PATCH v2 1/1] arch:arm: Agilex5 enablement   Lim, Jit Loon
• [PATCH] imx53-qsb: Convert to watchdog driver model   Jason Liu
• [PATCH 0/2] riscv: cpu: Add support for cv1800b SoC   Kongyang Liu
• [PATCH 1/2] riscv: cpu: cv1800b: Add support for cv1800b SoC   Kongyang Liu
• [PATCH 2/2] riscv: cache: Implement dcache for cv1800b   Kongyang Liu
• [PATCH 0/4] mmc: sophgo: milkv_duo: Add SD card support for Milk-V Duo board   Kongyang Liu
• [PATCH 1/4] mmc: cv1800b: Add sdhci driver support for cv1800b SoC   Kongyang Liu
• [PATCH 2/4] riscv: dts: sophgo: Add clk node   Kongyang Liu
• [PATCH 3/4] riscv: dts: sophgo: Add sdhci node   Kongyang Liu
• [PATCH 4/4] configs: milkv_duo: Add SD card configs   Kongyang Liu
• [PATCH 1/2] riscv: cpu: cv1800b: Add support for cv1800b SoC   Kongyang Liu
• inconsistent wget behavior   Paul Liu
• [PATCH] board: rockchip: Add Hardkernel ODROID-M1S   Tim Lunn
• [PATCH] dma: ti: k3-udma: Fix ring_idx to pair k3 nav rings"   Jai Luthra
• [PATCH] board: ti: rm-cfg: Update rm-cfg to reflect new resource reservation   Vishal Mahaveer
• [PATCH v8 0/8] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v8 1/8] bloblist: add API to check the register conventions   Raymond Mao
• [PATCH v8 2/8] bloblist: check bloblist with specified buffer size   Raymond Mao
• [PATCH v8 3/8] bloblist: refactor of bloblist_reloc()   Raymond Mao
• [PATCH v8 4/8] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v8 5/8] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v8 6/8] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v8 7/8] bloblist: Load the bloblist from the previous loader   Raymond Mao
• [PATCH v8 8/8] dts: OF_HAS_PRIOR_STAGE should depend on !BLOBLIST   Raymond Mao
• I'm trying to create a new nv_uboot-snow-usb.kpart file changing some parameters inside the file snow.h file, but the modifications I made aren't detected.   Mario Marietto
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Josua Mayer
• [PATCH v2 0/3] arm: mvebu: helios-4: add config fragment for spi booting et al   Josua Mayer
• [PATCH v2 1/3] arm: dts: armada-38x-solidrun-microsom: configure i2c0 bus   Josua Mayer
• [PATCH v2 2/3] arm: mvebu: helios4_defconfig: enable setexpr command   Josua Mayer
• [PATCH v2 3/3] board: helios-4: add config fragment for spi booting   Josua Mayer
• [PATCH v2 2/3] arm: mvebu: helios4_defconfig: enable setexpr command   Josua Mayer
• [PATCH 2/2] arm: dts: k3-am64: Sync with kernel v6.8-rc1   Nishanth Menon
• [PATCH 0/4] board: beagle: Enable 32k and debounce configuration   Nishanth Menon
• [PATCH 1/4] board: beagle: beagleplay: Enable 32k crystal   Nishanth Menon
• [PATCH 2/4] configs: am62x_beagleplay_r5_defconfig: Enable SPL_BOARD_INIT   Nishanth Menon
• [PATCH 3/4] arm: mach-k3: am62: Add Debounce configuration register definitions   Nishanth Menon
• [PATCH 4/4] board: beagle: beagleplay: Configure debounce registers   Nishanth Menon
• [PATCH 3/4] arm: mach-k3: am62: Add Debounce configuration register definitions   Nishanth Menon
• [PATCH 00/11] board/ti: k3 boards: Stop using findfdt   Nishanth Menon
• [PATCH 01/11] board: ti: Add missing common/Kconfig references   Nishanth Menon
• [PATCH 02/11] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH 03/11] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 04/11] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 05/11] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 06/11] board: ti: am65x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 07/11] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 08/11] board: ti: j721s2: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 09/11] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 10/11] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 11/11] include: env: ti: Drop default_findfdt   Nishanth Menon
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Nishanth Menon
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Nishanth Menon
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Nishanth Menon
• [PATCH V2 0/5] board: beagle: Enable 32k and debounce configuration and fixups   Nishanth Menon
• [PATCH V2 1/5] board: beagle: beagleplay: Enable 32k crystal   Nishanth Menon
• [PATCH V2 2/5] configs: am62x_beagleplay_r5_defconfig: Enable SPL_BOARD_INIT   Nishanth Menon
• [PATCH V2 3/5] arm: mach-k3: am62: Add Debounce configuration register definitions   Nishanth Menon
• [PATCH V2 4/5] board: beagle: beagleplay: Configure debounce registers   Nishanth Menon
• [PATCH V2 5/5] board: beagle: beagleplay: env: Drop usb and pxe as boot targets   Nishanth Menon
• [PATCH] arch: mach-k3: fix mapping higher DDR addresses as device memory   Nishanth Menon
• [PATCH] cmd: setexpr: fix no matching string in gsub return empty value   Massimiliano Minella
• [PATCH v2] cmd: setexpr: fix no matching string in gsub return empty value   Massimiliano Minella
• [PATCH] autoboot: Add check for result of malloc_cache_aligned()   Maks Mishin
• [PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Yannic Moog
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Anand Moon
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Anand Moon
• [PATCH 0/4] Add New Devices for RGxx3   Chris Morgan
• [PATCH 1/4] arm: dts: rockchip: rk3566: Remove unnecessary clks from rgxx3   Chris Morgan
• [PATCH 2/4] board: rockchip: Add support for Powkiddy RGB10MAX3   Chris Morgan
• [PATCH 3/4] configs: Remove unnecessary options from RGxx3 config   Chris Morgan
• [PATCH 4/4] board: rockchip: Add early ADC button detect for RGxx3   Chris Morgan
• [PATCH 1/4] arm: dts: rockchip: rk3566: Remove unnecessary clks from rgxx3   Chris Morgan
• [PATCH 4/4] board: rockchip: Add early ADC button detect for RGxx3   Chris Morgan
• [PATCH] command: add FDT setup for bootelf by flag   Maxim Moskalets
• [PATCH] cmd: add FDT setup for bootelf by flag   Maxim Moskalets
• [PATCH v2] cmd: add FDT setup for bootelf by flag   Maxim Moskalets
• [PATCH v3] cmd: add FDT setup for bootelf by flag   Maxim Moskalets
• [PATCH v4] cmd: add FDT setup for bootelf by flag   Maxim Moskalets
• [PATCH v4] cmd: add FDT setup for bootelf by flag   Maxim M. Moskalets
• [PATCH v8 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v9 00/15] Introduce initial TI's J784S4 and AM69 support   Apurva Nandan
• [PATCH v9 01/15] Makefile: remove hardcoded device tree source directory   Apurva Nandan
• [PATCH v9 02/15] arm: mach-k3: Kconfig: Sort SOC_K3 config entries   Apurva Nandan
• [PATCH v9 03/15] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v9 04/15] arm: mach-k3: Sort SoC JTAG_ID entries   Apurva Nandan
• [PATCH v9 05/15] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Apurva Nandan
• [PATCH v9 06/15] arm: mach-k3: j784s4: Add clk and power support   Apurva Nandan
• [PATCH v9 07/15] drivers: dma: Add support for J784S4 SoC   Apurva Nandan
• [PATCH v9 08/15] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v9 09/15] board: ti: j748s4: Add board config yaml files   Apurva Nandan
• [PATCH v9 10/15] board: ti: j784s4: Add boot environment variables   Apurva Nandan
• [PATCH v9 11/15] arm: dts: Introduce j784s4 u-boot dts files   Apurva Nandan
• [PATCH v9 12/15] arm: dts: Introduce am69-sk u-boot dts files   Apurva Nandan
• [PATCH v9 13/15] configs: j784s4_evm: Add defconfig for J784S4 EVM board   Apurva Nandan
• [PATCH v9 14/15] configs: am69_sk: Add defconfig for AM69 SK board   Apurva Nandan
• [PATCH v9 15/15] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Apurva Nandan
• [PATCH v10 01/15] Makefile: remove hardcoded device tree source directory   Apurva Nandan
• [PATCH v10 02/15] arm: mach-k3: Kconfig: Sort SOC_K3 config entries   Apurva Nandan
• [PATCH v10 03/15] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v10 04/15] arm: mach-k3: Sort SoC JTAG_ID entries   Apurva Nandan
• [PATCH v10 05/15] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Apurva Nandan
• [PATCH v10 06/15] arm: mach-k3: j784s4: Add clk and power support   Apurva Nandan
• [PATCH v10 07/15] drivers: dma: Add support for J784S4 SoC   Apurva Nandan
• [PATCH v10 08/15] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v10 09/15] board: ti: j748s4: Add board config yaml files   Apurva Nandan
• [PATCH v10 10/15] board: ti: j784s4: Add boot environment variables   Apurva Nandan
• [PATCH v10 11/15] arm: dts: Introduce j784s4 u-boot dts files   Apurva Nandan
• [PATCH v10 12/15] arm: dts: Introduce am69-sk u-boot dts files   Apurva Nandan
• [PATCH v10 13/15] configs: j784s4_evm: Add defconfig for J784S4 EVM board   Apurva Nandan
• [PATCH v10 14/15] configs: am69_sk: Add defconfig for AM69 SK board   Apurva Nandan
• [PATCH v10 15/15] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Apurva Nandan
• [PATCH 00/10] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
• [PATCH 01/10] mach-snapdragon: Add support for IPQ9574   Varadarajan Narayanan
• [PATCH 02/10] mach-snapdragon: ipq9574: Add SMEM defines needed for IPQ9574   Varadarajan Narayanan
• [PATCH 03/10] clk/qcom: Add support for clock registers in IPQ9574   Varadarajan Narayanan
• [PATCH 04/10] clk/qcom: Include IPQ9574   Varadarajan Narayanan
• [PATCH 05/10] mach-snapdragon: Update gd->ram_size in msm_fixup_memory   Varadarajan Narayanan
• [PATCH 06/10] pinctrl: qcom: Add support for 'pull-down'   Varadarajan Narayanan
• [PATCH 07/10] pinctrl: qcom: Include IPQ9574   Varadarajan Narayanan
• [PATCH 08/10] mmc: msm_sdhci: Handle different vendor cap register offsets   Varadarajan Narayanan
• [PATCH 09/10] mmc: msm_sdhci: Reset clocks before reconfiguration   Varadarajan Narayanan
• [PATCH 10/10] board: qualcomm: Add support for IPQ9574 RDP433   Varadarajan Narayanan
• [PATCH 01/10] mach-snapdragon: Add support for IPQ9574   Varadarajan Narayanan
• [PATCH 00/10] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
• [PATCH 1/4] board: beagle: beagleplay: Enable 32k crystal   Robert Nelson
• [PATCH 0/2] arm: socfpga: arria10: allow to reprogram FPGA with warm reboot   Dinh Nguyen
• Re: [PATCH 0/4] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Christopher Obbard
• [PATCH 04/11] board: rockchip: Add a common ROCK Pi 4 target   Christopher Obbard
• [PATCH v2] qemu-arm: round down memory to multiple of 2MB for LPAE   Igor Opaniuk
• [PATCH v3 3/3] cmd: rng: Add rng list command   Igor Opaniuk
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Igor Opaniuk
• [PATCH v2 01/13] soc: add info to identify the am62p SoC family   Igor Opaniuk
• [PATCH v2 02/13] power: domain: ti: use IS_ENABLED macro   Igor Opaniuk
• [PATCH v2 3/3] mx6sabresd: Remove board_phy_config()   Igor Opaniuk
• [PATCH v2 1/3] mx6sabresd: Fix U-Boot corruption after saving the environment   Igor Opaniuk
• [PATCH v2 1/3] mx6sabresd: Fix U-Boot corruption after saving the environment   Igor Opaniuk
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Igor Opaniuk
• [PATCH] toradex: tdx-cfg-block: add 0086 i.mx8m mini sku   Igor Opaniuk
• [PATCH] poplar: add myself as co-maintainer   Igor Opaniuk
• [PATCH] poplar: add myself as co-maintainer   Igor Opaniuk
• [PATCH v1 0/7] AVB: cosmetic adjustments/improvements   Igor Opaniuk
• [PATCH v1 1/7] common: avb_verify: don't call mmc_switch_part for SD   Igor Opaniuk
• [PATCH v1 2/7] avb: move SPDX license itdentifiers to the first line   Igor Opaniuk
• [PATCH v1 3/7] common: avb_verify: rework error/debug prints   Igor Opaniuk
• [PATCH v1 4/7] cmd: avb: rework prints   Igor Opaniuk
• [PATCH v1 5/7] common: avb_verify: add str_avb_io_error/str_avb_slot_error   Igor Opaniuk
• [PATCH v1 6/7] cmd: avb: rework do_avb_verify_part   Igor Opaniuk
• [PATCH v1 7/7] doc: android: avb: add slot_suffix param details   Igor Opaniuk
• [PATCH v1] cmd: hash: fix param count check   Igor Opaniuk
• [PATCH 1/6] arm: mach-k3: Move SYS_K3_SPL_ATF definition into R5 Kconfig   Igor Opaniuk
• [PATCH 2/6] arm: mach-k3: Move disable_linefill_optimization() into R5 directory   Igor Opaniuk
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Igor Opaniuk
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Igor Opaniuk
• [PATCH] stm32mp: cmd_stm32prog: add dependencies with USB_GADGET_DOWNLOAD   Igor Opaniuk
• [PATCH v1] cmd: hash: fix param count check   Igor Opaniuk
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Igor Opaniuk
• [PATCH v1 7/7] doc: android: avb: add slot_suffix param details   Igor Opaniuk
• [PATCH v1 4/7] cmd: avb: rework prints   Igor Opaniuk
• [AVB/AB] Overhaul plans   Igor Opaniuk
• [AVB/AB] Overhaul plans   Igor Opaniuk
• [PATCH v2 0/7] AVB: cosmetic adjustments/improvements   Igor Opaniuk
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Igor Opaniuk
• [PATCH v2 2/7] avb: move SPDX license identifiers to the first line   Igor Opaniuk
• [PATCH v2 3/7] common: avb_verify: rework error/debug prints   Igor Opaniuk
• [PATCH v2 4/7] cmd: avb: rework prints   Igor Opaniuk
• [PATCH v2 5/7] common: avb_verify: add str_avb_io_error/str_avb_slot_error   Igor Opaniuk
• [PATCH v2 6/7] cmd: avb: rework do_avb_verify_part   Igor Opaniuk
• [PATCH v2 7/7] doc: android: avb: sync usage details   Igor Opaniuk
• [PATCH v2 1/3] imx93: Use a header for imx9_probe_mu declaration   Igor Opaniuk
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Igor Opaniuk
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Igor Opaniuk
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Igor Opaniuk
• [PATCH] doc/develop/codingstyle.rst: Clarify include section   Igor Opaniuk
• [PATCH v1] cmd: md5sum: use hash_command   Igor Opaniuk
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Igor Opaniuk
• [PATCH] configs: khadas-vim3*_android: fix AVB oom error   Igor Opaniuk
• [PATCH v2] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Igor Opaniuk
• [PATCH v1] MAINTAINERS: add custodian tree info for AV/AVB   Igor Opaniuk
• [RESEND PATCH v1] MAINTAINERS: add custodian tree info for AVB/AB   Igor Opaniuk
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Igor Opaniuk
• [PATCH v1 0/5] TEE: minor cleanup   Igor Opaniuk
• [PATCH v1 1/5] tee: optee: fix description in Kconfig   Igor Opaniuk
• [PATCH v1 2/5] tee: sandbox: fix spelling errors   Igor Opaniuk
• [PATCH v1 3/5] cmd: optee_rpmb: build cmd for sandbox   Igor Opaniuk
• [PATCH v1 4/5] test: py: add optee_rpmb tests   Igor Opaniuk
• [PATCH v1 5/5] tee: remove common.h inclusion   Igor Opaniuk
• [PATCH v1] include: android_bootloader_message.h: sync with AOSP upstream   Igor Opaniuk
• LTO build failure with GCC 13.2.1   Igor Opaniuk
• [PATCH v1] include: android_bootloader_message.h: sync with AOSP upstream   Igor Opaniuk
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Igor Opaniuk
• ECDSA related PRs   Igor Opaniuk
• [PATCH v1] include: android_bootloader_message.h: sync with AOSP upstream   Igor Opaniuk
• [PATCH v1 0/5] TEE: minor cleanup   Igor Opaniuk
• [PATCH v1] cmd: md5sum: use hash_command   Igor Opaniuk
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Ole Orhagen
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Ole Orhagen
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Ole Orhagen
• [PATCH] cmd: eeprom: Fix config dependency   Ivan Orlov
• [PATCH] cmd: eeprom: Fix config dependency   Ivan Orlov
• [PATCH v2] cmd: eeprom: Fix config dependency   Ivan Orlov
• imx93-var-som: ahab: U-boot is hanging   Mathieu Othacehe
• imx93-var-som: ahab: U-boot is hanging   Mathieu Othacehe
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH 1/2] board: imx93_var_som: Probe ELE MU   Mathieu Othacehe
• [PATCH 2/2] configs: imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH v2 0/3] imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH v2 1/3] imx93: Use a header for imx9_probe_mu declaration   Mathieu Othacehe
• [PATCH v2 2/3] board: imx93_var_som: Probe ELE MU   Mathieu Othacehe
• [PATCH v2 3/3] configs: imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH 1/2] board: imx93_var_som: Probe ELE MU   Mathieu Othacehe
• [PATCH 0/2] imx93_var_som: Enable AHAB support   Mathieu Othacehe
• [PATCH] usb: ehci-mx6: Add i.MX93 support   Mathieu Othacehe
• [PATCH v2] usb: ehci-mx6: Add i.MX93 support   Mathieu Othacehe
• [PATCH v2] usb: ehci-mx6: Add i.MX93 support   Mathieu Othacehe
• [PATCH 0/5] imx93_var_som: Add USB support.   Mathieu Othacehe
• [PATCH 1/5] arm: dts: imx93: Add USB support.   Mathieu Othacehe
• [PATCH 2/5] arm: dts: imx93-var-som-symphony: Add USB support.   Mathieu Othacehe
• [PATCH 3/5] configs: imx93_var_som: Add USB support.   Mathieu Othacehe
• [PATCH 4/5] configs: imx93_var_som: Add fastboot support.   Mathieu Othacehe
• [PATCH 5/5] configs: imx93_var_som: Add EFI support.   Mathieu Othacehe
• [PATCH 0/2] Fix OP-TEE support   Mathieu Othacehe
• [PATCH 1/2] imx9: Fix OP-TEE support   Mathieu Othacehe
• [PATCH 2/2] tools: imx9_image: Reword warning message.   Mathieu Othacehe
• [PATCH] imx9: Update to mx93 A1 chip revision.   Mathieu Othacehe
• [PATCH 2/3] rockchip: rk356x: Enable eMMC HS200 mode   Weizhao Ouyang
• [PATCH 3/3] rockchip: rk3588: Enable eMMC HS200 mode   Weizhao Ouyang
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH 01/18] rockchip: rk3588: use mainline pmu-grf compatible   Weizhao Ouyang
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Weizhao Ouyang
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Weizhao Ouyang
• [PATCH v3 3/3] cmd: rng: Add rng list command   Weizhao Ouyang
• [PATCH] arm64: zynqmp: Remove snps,enable_guctl1_ipd_quirk property   Laurent Pinchart
• [PATCH v1] include: android_bootloader_message.h: sync with AOSP upstream   Sam Protsenko
• [PATCH 1/1] sunxi: sun4i: add missing sdelay() to clock_init_safe()   Andre Przywara
• [PATCH 1/1] sunxi: sun4i: Introduce KConfig option SPL_SYS_CLK_FREQ   Andre Przywara
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Andre Przywara
• [PATCH] sunxi: dram: h6: fix the unreliability related to the DDR3 sequence   Andre Przywara
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Andre Przywara
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Andre Przywara
• [PATCH v2] net: designware: Support high memory nodes   Andre Przywara
• [PATCH RFC] sunxi: pinephone: detect existed magnetometer and fixup dtb   Andre Przywara
• [PATCH RFC] sunxi: pinephone: detect existed magnetometer and fixup dtb   Andre Przywara
• [PATCH v2] arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO configs   Andre Przywara
• [PATCH v2] net: designware: Support high memory nodes   Andre Przywara
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Andre Przywara
• [PATCH v3 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Andre Przywara
• [PATCH v3 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Andre Przywara
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v2 1/1] net: ti: am65-cpsw-nuss: Remove incorrect RGMII_ID bit functionality   Roger Quadros
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH] memory: ti-gpmc: Fix lock up at A53 SPL during NAND boot on AM64-EVM   Roger Quadros
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Roger Quadros
• [PATCH 0/2] net: ti: am65-cpsw / cpsw-mdio: Switch to DM MDIO   Roger Quadros
• [PATCH 1/2] net: mdio: Handle bus level GPIO Reset   Roger Quadros
• [PATCH 2/2] net: am65-cpsw: cpsw_mdio: Switch to proper DM_MDIO framework   Roger Quadros
• [PATCH 1/2] net: mdio: Handle bus level GPIO Reset   Roger Quadros
• [PATCH 1/2] net: mdio: Handle bus level GPIO Reset   Roger Quadros
• [PATCH v5] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Roger Quadros
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v2 0/2] net: ti: am65-cpsw / cpsw-mdio: Switch to DM MDIO   Roger Quadros
• [PATCH v2 1/2] net: mdio: Handle bus level GPIO Reset   Roger Quadros
• [PATCH v2 2/2] net: am65-cpsw: cpsw_mdio: Switch to proper DM_MDIO framework   Roger Quadros
• [PATCH v5] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH v6] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   Roger Quadros
• [PATCH] arm: dts: k3-am625-verdin-r5: Change CPU frequency to 1000MHz   Vignesh Raghavendra
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Sourabh Hegde Ramu
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Sourabh Hegde Ramu
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Sourabh Hegde Ramu
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [PATCH v2] common: usb-hub: Reset USB 3.0 hubs only   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Shantur Rathore
• [PATCH v2] common: usb-hub: Reset USB 3.0 hubs only   Shantur Rathore
• [PATCH v1 0/5] Add support for TI TPS65224 PMIC   Bhargav Raviprakash
• [PATCH v1 1/5] power: tps65941: Add macros of TPS65224 PMIC   Bhargav Raviprakash
• [PATCH v1 2/5] power: pmic: tps65941: Add TI TPS65224 PMIC   Bhargav Raviprakash
• [PATCH v1 3/5] power: regulator: tps65941: Added macros for BUCK ID   Bhargav Raviprakash
• [PATCH v1 4/5] power: regulator: tps65941: use function callbacks for conversion ops   Bhargav Raviprakash
• [PATCH v1 5/5] power: regulator: tps65941: Add TPS65224 PMIC regulator support   Bhargav Raviprakash
• [PATCH] MAINTAINERS: Update after GEHC spin-off   Ian Ray
• EXT: [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL   Ian Ray
• EXT: [PATCH 2/5] msc_sm2s_imx8mp: Make Ethernet functional   Ian Ray
• EXT: [PATCH 3/5] imx8mp-msc-sm2s: Add mmc aliases   Ian Ray
• EXT: [PATCH 4/5] msc_sm2s_imx8mp: Add redundant environment support   Ian Ray
• EXT: [PATCH 5/5] msc_sm2s_imx8mp: Fix CONFIG_DEFAULT_FDT_FILE   Ian Ray
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Miquel Raynal
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Miquel Raynal
• [PATCH v2 0/6] video: Add UTF-8 support for UEFI applications   Janne Grunau via B4 Relay
• [PATCH v2 1/6] lib: charset: Fix and extend utf8_to_utf32_stream() documentation   Janne Grunau via B4 Relay
• [PATCH v2 2/6] video: console: Parse UTF-8 character sequences   Janne Grunau via B4 Relay
• [PATCH v2 3/6] lib/charset: Map Unicode code points to CP437 code points 0-31   Janne Grunau via B4 Relay
• [PATCH v2 4/6] efi_selftest: Add international characters test   Janne Grunau via B4 Relay
• [PATCH v2 5/6] efi_selftest: Add box drawing character selftest   Janne Grunau via B4 Relay
• [PATCH v2 6/6] efi_selftest: Add symbol character selftest   Janne Grunau via B4 Relay
• [PATCH 0/6] USB keyboard improvements for asahi / desktop systems   Janne Grunau via B4 Relay
• [PATCH 1/6] usb: xhci: refactor xhci_set_configuration   Janne Grunau via B4 Relay
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Janne Grunau via B4 Relay
• [PATCH 3/6] usb: xhci: Abort transfers with unallocated rings   Janne Grunau via B4 Relay
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Janne Grunau via B4 Relay
• [PATCH 5/6] usb: kbd: support Apple Magic Keyboards (2021)   Janne Grunau via B4 Relay
• [PATCH 6/6] usb: kbd: Add probe quirk for Apple and Keychron keyboards   Janne Grunau via B4 Relay
• [PATCH 0/3] usb: ehci-generic: setup a bulk of phy when possible   Yang Xiwen via B4 Relay
• [PATCH 1/3] phy: add generic_setup(shutdown)_phy_bulk()   Yang Xiwen via B4 Relay
• [PATCH 2/3] test: phy: test generic_setup(shutdown)_phy_bulk()   Yang Xiwen via B4 Relay
• [PATCH 3/3] usb: ehci: Make usage of generic_{setup,shutdown}_phy_bulk() helpers   Yang Xiwen via B4 Relay
• [PATCH v2 0/3] mmc: hi6220-dwmmc: handle resets and clocks   Yang Xiwen via B4 Relay
• [PATCH v2 1/3] mmc: hi6220-dwmmc: handle clocks and resets if CONFIG_CLK and CONFIG_DM_RESET enabled   Yang Xiwen via B4 Relay
• [PATCH v2 2/3] mmc: dw_mmc: Don't return error if data busy timeout   Yang Xiwen via B4 Relay
• [PATCH v2 3/3] mmc: hi6220_dw_mmc: add fifoth_val to private data and set it in .probe   Yang Xiwen via B4 Relay
• [PATCH 0/3] usb: dwv3: add glue driver for hi3798mv200   Yang Xiwen via B4 Relay
• [PATCH 1/3] usb: dwc3: handle return value of clk_get_rate() correctly   Yang Xiwen via B4 Relay
• [PATCH 2/3] usb: dwc3: replace argument mode with child ofnode   Yang Xiwen via B4 Relay
• [PATCH 3/3] usb: dwc3: add glue driver for Hi3798MV200   Yang Xiwen via B4 Relay
• [PATCH v2 0/3] usb: ehci-generic: setup a bulk of phy when possible   Yang Xiwen via B4 Relay
• [PATCH v2 1/3] phy: add generic_setup(shutdown)_phy_bulk()   Yang Xiwen via B4 Relay
• [PATCH v2 2/3] test: phy: test generic_setup(shutdown)_phy_bulk()   Yang Xiwen via B4 Relay
• [PATCH v2 3/3] usb: ehci: Make usage of generic_{setup,shutdown}_phy_bulk() helpers   Yang Xiwen via B4 Relay
• [PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs   Yang Xiwen via B4 Relay
• [PATCH RESEND] serial: pl01x: set baudrate when probing   Yang Xiwen via B4 Relay
• [PATCH v2] serial: pl01x: set baudrate when probing   Yang Xiwen via B4 Relay
• [PATCH v2 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2   Teresa Remmet
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Max Resch
• [PATCH v3] rng: Add Turris Mox rTWM RNG driver   Max Resch
• [PATCH v4] rng: Add Turris Mox rTWM RNG driver   Max Resch
• [PATCH v5] rng: Add Turris Mox rTWM RNG driver   Max Resch
• [PATCH 1/1] sunxi: sun4i: Introduce KConfig option SPL_SYS_CLK_FREQ   Tom Rini
• Please pull u-boot-watchdog/master   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-fixes-20240201   Tom Rini
• [PATCH 1/2] mx6sabresd: Fix U-Boot corruption after saving the environment   Tom Rini
• [PATCH v2 1/3] mx6sabresd: Fix U-Boot corruption after saving the environment   Tom Rini
• [PATCH v2 3/3] board: helios-4: add config fragment for spi booting   Tom Rini
• [PATCH v2 2/3] mx6sabresd: Convert to watchdog driver model   Tom Rini
• [PATCH v2 2/3] mx6sabresd: Convert to watchdog driver model   Tom Rini
• [PATCH v5 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• Pull request smbios-2024-04-rc2   Tom Rini
• [PATCH 1/1] docker: build QEMU v8.2.1   Tom Rini
• [GIT PULL] rpi: updates for v2024.04   Tom Rini
• [PATCH v3 0/2] arm: s5p4418: fix relocation   Tom Rini
• [PATCH v3 3/3] cmd: rng: Add rng list command   Tom Rini
• [PATCH 0/5] update venice dts   Tom Rini
• [PATCH v6 0/7] board: siemens: clean up subfolders   Tom Rini
• [PATCH v5 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• [PATCH 00/10] Add AVS support for J721S2   Tom Rini
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Tom Rini
• [PATCH] xyzModem: Correct xmodem blk verification conditions   Tom Rini
• [PATCH 00/10] Add AVS support for J721S2   Tom Rini
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Tom Rini
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Tom Rini
• Pull request: u-boot-rockchip-20240207   Tom Rini
• [PATCH] scripts/gen_compile_commands: update to Linux v6.7   Tom Rini
• [PATCH v1] arm: dts: nuvoton: modify npcm8xx reset property   Tom Rini
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Tom Rini
• [PATCH 1/1] common: event: check event_type_name() argument   Tom Rini
• [PATCH v4] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   Tom Rini
• [RESEND PATCH v2] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Tom Rini
• [PATCH V5 1/2] firmware: ti_sci: fix the secure_hdr in do_xfer   Tom Rini
• [PATCH V5 2/2] firmware: ti_sci: Add comment explaining the is_secure code   Tom Rini
• [PATCH] blk: host_dev: Fix error code in host_sb_attach_file()   Tom Rini
• REGRESSION: [PATCH 5/9] toradex: Use checkboard() instead of show_board_info()   Tom Rini
• [PATCH 1/2] ti: keystone2: Imply NFS command support   Tom Rini
• [GIT PULL] please pull fsl-qoriq-2024-2-8   Tom Rini
• Pull request: Please pull u-boot-imx-master-20240208   Tom Rini
• Bug: PDF documentation doesn't build according to instructions   Tom Rini
• [PATCH] Added FDT PAD memory size while reserving memory for FDT to avoid some memory corruption issue   Tom Rini
• [PATCH] doc/develop/codingstyle.rst: Clarify include section   Tom Rini
• [PATCH v2 2/2] smbios: fill wake-up type   Tom Rini
• [PATCH v2 2/2] smbios: fill wake-up type   Tom Rini
• [PATCH] Added FDT PAD memory size while reserving memory for FDT to avoid some memory corruption issue   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20240209   Tom Rini
• [PATCH V3 04/11] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Tom Rini
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Tom Rini
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Tom Rini
• [PULL] u-boot-sh/master-779h0-r2   Tom Rini
• Pull request: Please pull u-boot-imx-master-20240212   Tom Rini
• [PATCH] doc/develop/codingstyle.rst: Clarify include section   Tom Rini
• [PATCH] doc/develop/codingstyle.rst: Clarify include section   Tom Rini
• [PATCH] cmd: remove common.h from exception command implementations   Tom Rini
• [PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs   Tom Rini
• [PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs   Tom Rini
• [PATCH v2] net: designware: Support high memory nodes   Tom Rini
• [PATCH] cmd: add FDT setup for bootelf by flag   Tom Rini
• [PATCH v2] net: designware: Support high memory nodes   Tom Rini
• [PATCH v2] net: designware: Support high memory nodes   Tom Rini
• Pull request doc-2024-04-rc2   Tom Rini
• [PATCH v2] test/py: saveenv: Add a test for saveenv command   Tom Rini
• [PATCH v2] test/py: reset: Add a test for reset command   Tom Rini
• [PATCH 1/3] Dockerfile: Build coreboot from source   Tom Rini
• [PATCH 2/3] CI: Switch to using coreboot from our image   Tom Rini
• [PATCH 3/3] CI: Move to latest container image   Tom Rini
• [PATCH 1/3] Dockerfile: Build coreboot from source   Tom Rini
• [PATCH v2] boot: add support for button commands   Tom Rini
• [PATCH] poplar: add myself as co-maintainer   Tom Rini
• [PATCH] memory: ti-gpmc: Fix lock up at A53 SPL during NAND boot on AM64-EVM   Tom Rini
• [PATCH v1] cmd: hash: fix param count check   Tom Rini
• [PATCH v1] Revert "board: verdin-am62: set cpu core voltage depending on speed grade"   Tom Rini
• [ANN] U-Boot v2024.04-rc2 released   Tom Rini
• [PATCH v2] scripts: dtc-version: Don't show error messages   Tom Rini
• [GIT PULL] xilinx patches for v2024.04-rc3   Tom Rini
• ACPI Vendor ID Request   Tom Rini
• [PATCH v3 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20240215   Tom Rini
• [PATCH 1/2] doc: Update our clang documentation to reflect current status   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PATCH 1/2] doc: Update our clang documentation to reflect current status   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Tom Rini
• [PULL] u-boot-sh/master-porter   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20240219   Tom Rini
• [PATCH] virtio: fix get_config / set_config for legacy VirtIO targets   Tom Rini
• LTO build failure with GCC 13.2.1   Tom Rini
• [PATCH] pylibfdt: Fix "invalid escape sequence '\w'" in setup.py   Tom Rini
• Please pull u-boot-samsung master   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH v3] test/py: reset: Add a test for reset command   Tom Rini
• [PATCH v3] test/py: saveenv: Add a test for saveenv command   Tom Rini
• [PATCH 00/11] board/ti: k3 boards: Stop using findfdt   Tom Rini
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Tom Rini
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Tom Rini
• [PATCH] ARM: Enable CONFIG_64BIT for static analysis   Tom Rini
• [PULL] Please pull qcom/qcom-fixes-2024.04   Tom Rini
• [PATCH] cmd: eeprom: Fix config dependency   Tom Rini
• [PATCH 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Tom Rini
• [PATCH v3 1/1] Makefile: pass -undef option to cmd_gen_envp   Tom Rini
• [PULL] Please pull u-boot-amlogic-fixes-20240223   Tom Rini
• [PATCH v2] cmd: eeprom: Fix config dependency   Tom Rini
• [PATCH v2 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Tom Rini
• [PATCH v10 08/15] board: ti: j784s4: Add board support for J784S4 EVM   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20240224   Tom Rini
• [PATCH v2 3/3] arm: dts: k3-j721e-sk: Remove OSPI phypattern partition   Tom Rini
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Tom Rini
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Tom Rini
• [ANN] U-Boot v2024.04-rc3 released   Tom Rini
• [PATCH 1/2] opos6uldev: make the LCD work again   Tom Rini
• [PATCH v2 2/2] arm: dts: k3-am642-evm/sk: Enable OSPI support in SPL   Tom Rini
• [PATCH 01/16] kbuild: Allow for CONFIG_SYS_CONFIG_NAME to be unset   Tom Rini
• [PATCH 1/2] opos6uldev: make the LCD work again   Tom Rini
• [PATCH 1/2] opos6uldev: make the LCD work again   Tom Rini
• [PATCH 1/3] Dockerfile: Build coreboot from source   Tom Rini
• [RFC PATCH 1/6] arm: baltos: remove custom linker script   Tom Rini
• [NEXT] Pull request efi-next-2024-02-28   Tom Rini
• [PATCH v3 07/13] board: ti: introduce basic board files for the am62px family   Tom Rini
• [PATCH 0/3] mux: Drop usage of "u-boot,mux-autoprobe"   Tom Rini
• [PATCH 1/2] opos6uldev: make the LCD work again   Tom Rini
• [PATCH 1/2] opos6uldev: make the LCD work again   Tom Rini
• [PATCH] board: rockchip: add Rockchip Toybrick TB-RK3588X board   Tom Rini
• [PATCH v2 0/1] Fix booting kernels with ATAGS and extlinux   Tom Rini
• [PATCH v8 0/8] Handoff bloblist from previous boot stage   Tom Rini
• [PATCH v1 0/5] TEE: minor cleanup   Tom Rini
• [RFC PATCH 0/6] Clean up arm linker scripts   Tom Rini
• [GIT PULL] rpi: updates for v2024.04   Peter Robinson
• [RFC] Drop md5sum, crc32 and sha1 cmds in favor of hash cmd   Peter Robinson
• [PATCH] sunxi: defconfig: Add pstore support for pinephone   Peter Robinson
• [PATCH v2 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Peter Robinson
• [PATCH v2 05/20] rockchip: pine64: pinephone-pro: migrate to rockchip_early_misc_init_r   Peter Robinson
• [PATCH v2 06/20] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Peter Robinson
• [PATCH v2 10/20] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Peter Robinson
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Peter Robinson
• [PATCH 0/4] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Peter Robinson
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Peter Robinson
• Booting from NFSv4 file system?   Peter Robinson
• How To Move Root Partition From eMMC to SSD   Peter Robinson
• Booting RPi5B with latest git   Peter Robinson
• [PATCH] remove Broadcom Northstar 2 Target entry   Peter Robinson
• [PATCH 04/11] board: rockchip: Add a common ROCK Pi 4 target   Peter Robinson
• [PATCH 0/2] Drop reiserfs support   Peter Robinson
• [PATCH 1/2] configs: ethernut5: Drop reiserfs   Peter Robinson
• [PATCH 2/2] fs: drop reiserfs   Peter Robinson
• [PATCH] disk: dos: Add all options for EFI System Partitions   Peter Robinson
• [PATCH] disk: dos: Add all options for EFI System Partitions   Peter Robinson
• [PATCH v4 16/39] board: dragonboard410c: add chainloaded config fragment   Peter Robinson
• ECDSA related PRs   Peter Robinson
• Raspberry Pi 3b Plus USB-Ethernet lan78xx_eth address not set   Peter Robinson
• [PATCH v2] disk: dos: Add all options for EFI System Partitions   Peter Robinson
• [RFC PATCH 0/6] Clean up arm linker scripts   Peter Robinson
• [PATCH v1 0/5] TEE: minor cleanup   Peter Robinson
• [PATCH V4 2/2] configs: andes: add watchdog support fot andes ae350   Stefan Roese
• [PATCH V4 1/2] drivers: watchdog: add andes atcwdt200 support   Stefan Roese
• [PATCH V4 2/2] configs: andes: add watchdog support fot andes ae350   Stefan Roese
• Please pull u-boot-watchdog/master   Stefan Roese
• [PATCH v3] rng: Add Turris Mox rTWM RNG driver   Stefan Roese
• [PATCH v4] rng: Add Turris Mox rTWM RNG driver   Stefan Roese
• [PATCH v2] net: mv88e6xxx: fix missing SMI address initialization   Stefan Roese
• [PATCH v5] rng: Add Turris Mox rTWM RNG driver   Stefan Roese
• [RFC PATCH v2 0/2] Introduce fastboot oem board command   Alexey Romanov
• [RFC PATCH v2 1/2] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [RFC PATCH v2 2/2] board: ad401: example of fastboot oem board realization   Alexey Romanov
• [RFC PATCH v2 2/2] board: ad401: example of fastboot oem board realization   Alexey Romanov
• [RFC PATCH v2 0/2] Introduce fastboot oem board command   Alexey Romanov
• [PATCH v1 0/4] Introduce mtdblock device   Alexey Romanov
• [PATCH v1 1/4] drivers: introduce mtdblock abstraction   Alexey Romanov
• [PATCH v1 2/4] disk: support MTD partitions   Alexey Romanov
• [PATCH v1 3/4] spinand: bind mtdblock   Alexey Romanov
• [PATCH v1 4/4] efi: block: compile only if CONFIG_EFI_PARTITION enabled   Alexey Romanov
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Svyatoslav Ryhel
• [PATCH v2 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav Ryhel
• [PATCH 0/4] Add initial support for Microchip SAMA7G54 Curiosity board   Mihai Sain
• [PATCH 1/4] ARM: dts: at91: sama7g5: add flexcom 10 node   Mihai Sain
• [PATCH 2/4] ARM: dts: at91: sama7g54_curiosity: Add initial device tree of the board   Mihai Sain
• [PATCH 3/4] board: at91: sama7g54_curiosity: Add initial board support   Mihai Sain
• [PATCH 4/4] configs: at91: sama7g54_curiosity: Add initial default configs   Mihai Sain
• [PATCH v2 0/4] Add initial support for Microchip SAMA7G54 Curiosity board   Mihai Sain
• [PATCH v2 1/4] ARM: dts: at91: sama7g5: Add flexcom 10 node   Mihai Sain
• [PATCH v2 2/4] ARM: dts: at91: sama7g54_curiosity: Add initial device tree of the board   Mihai Sain
• [PATCH v2 3/4] board: at91: sama7g54_curiosity: Add initial board support   Mihai Sain
• [PATCH v2 4/4] configs: at91: sama7g54_curiosity: Add initial default configs   Mihai Sain
• LTO build failure with GCC 13.2.1   Sahaj Sarup
• verdin-imx8mp: Ethernet does not load at boot   Sahaj Sarup
• [PATCH 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Frieder Schrempf
• [PATCH 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v2 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Frieder Schrempf
• [PATCH v2 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v2 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v3 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Frieder Schrempf
• [PATCH v3 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v3 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v2 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v4 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Frieder Schrempf
• [PATCH v4 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v4 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v3 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH v3 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Frieder Schrempf
• [PATCH v3 2/3] board: Add support for Sielaff i.MX6 Solo board   Frieder Schrempf
• [PATCH] board: imx6dl-sielaff: spl.c: Remove multiline string   Frieder Schrempf
• [PATCH v1 0/4] Introduce mtdblock device   Frieder Schrempf
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Frieder Schrempf
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Frieder Schrempf
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Frieder Schrempf
• [PATCH 0/3] smbios: correct handling of table size   Heinrich Schuchardt
• [PATCH 1/3] cmd: smbios: show correct table size for SMBIOS2.1 entry point   Heinrich Schuchardt
• [PATCH 2/3] smbios: do not determine maximum structure size   Heinrich Schuchardt
• [PATCH 3/3] smbios: correctly name Structure Table Maximum Size field   Heinrich Schuchardt
• [PATCH 1/1] doc: board: starfive: fix rendering of OpenSBI logo   Heinrich Schuchardt
• [PATCH v1] doc: imx: imxrt1170: Document imxrt1170-evk board   Heinrich Schuchardt
• [PATCH 1/2] riscv: cpu: cv1800b: Add support for cv1800b SoC   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify error message in efi_disk_create_raw()   Heinrich Schuchardt
• [PATCH] test: cmd: mbr: Fix Smatch static checker warning   Heinrich Schuchardt
• Pull request smbios-2024-04-rc2   Heinrich Schuchardt
• [PATCH 1/1] docker: build QEMU v8.2.1   Heinrich Schuchardt
• [PATCH 10/15] rng: rockchip: Use same compatible as linux   Heinrich Schuchardt
• [PATCH 0/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH 1/2] cmd: smbios: type 1 wake-up time, family   Heinrich Schuchardt
• [PATCH 2/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH v2 0/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH v2 1/2] cmd: smbios: type 1 wake-up time, family   Heinrich Schuchardt
• [PATCH v2 2/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH v2 2/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH v3 0/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH v3 1/2] cmd: smbios: type 1 wake-up time, family   Heinrich Schuchardt
• [PATCH v3 2/2] smbios: fill wake-up type   Heinrich Schuchardt
• [PATCH] sandbox: improve description of CONFIG_SANDBOX_CRASH_RESET   Heinrich Schuchardt
• [PATCH v2 1/6] lib: charset: Fix and extend utf8_to_utf32_stream() documentation   Heinrich Schuchardt
• [PATCH v2 2/6] video: console: Parse UTF-8 character sequences   Heinrich Schuchardt
• [PATCH v2 3/6] lib/charset: Map Unicode code points to CP437 code points 0-31   Heinrich Schuchardt
• [PATCH v2 4/6] efi_selftest: Add international characters test   Heinrich Schuchardt
• [PATCH v2 6/6] efi_selftest: Add symbol character selftest   Heinrich Schuchardt
• [PATCH v2 5/6] efi_selftest: Add box drawing character selftest   Heinrich Schuchardt
• [PATCH 1/1] efi_driver: provide SBI based runtime system reset   Heinrich Schuchardt
• [PATCH] doc/develop/codingstyle.rst: Clarify include section   Heinrich Schuchardt
• [PATCH] cmd: remove common.h from exception command implementations   Heinrich Schuchardt
• Pull request doc-2024-04-rc2   Heinrich Schuchardt
• [PATCH] doc: fix mistyped "env flags" command   Heinrich Schuchardt
• [PATCH 1/1] rng: eliminate common.h include from RNG drivers   Heinrich Schuchardt
• [PATCH v4] rng: Add Turris Mox rTWM RNG driver   Heinrich Schuchardt
• [PATCH 1/1] arm: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: set IMAGE_DLLCHARACTERISTICS_NX_COMPAT   Heinrich Schuchardt
• [PATCH v1 1/5] tee: optee: fix description in Kconfig   Heinrich Schuchardt
• [PATCH v1 2/5] tee: sandbox: fix spelling errors   Heinrich Schuchardt
• [PATCH v3 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board   Heinrich Schuchardt
• Re: [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Heinrich Schuchardt
• Re: [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Heinrich Schuchardt
• Re: [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Heinrich Schuchardt
• [PATCH] efi_loader: Don't carve out memory reservations too early   Heinrich Schuchardt
• [PATCH 2/2] doc: Rework the gcc section to reflect general build instructions   Heinrich Schuchardt
• [PATCH 1/1] clk: sifive: append missing \n to messages   Heinrich Schuchardt
• [PATCH] clk: sifive: check wrpll_configure_for_rate() return value   Heinrich Schuchardt
• [PATCH 1/1] clk: sifive: avoid declaring static variables in includes   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: ignore device-tree in ACPI case   Heinrich Schuchardt
• [PATCH] efi_loader: Don't carve out memory reservations too early   Heinrich Schuchardt
• [PATCH] remove Broadcom Northstar 2 Target entry   Heinrich Schuchardt
• [PATCH 1/1] ext4: detect directories in ext4fs_exists()   Heinrich Schuchardt
• riscv: supports_extension() broken for long isa strings   Heinrich Schuchardt
• [PATCH 1/1] arm: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH 1/1] arm: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH 1/1] serial: move sbi_dbcn_available to .data section   Heinrich Schuchardt
• [PATCH v2 0/2] arm: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH v2 1/2] arm: page align EFI binary section   Heinrich Schuchardt
• [PATCH v2 2/2] arm: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH v1 4/4] efi: block: compile only if CONFIG_EFI_PARTITION enabled   Heinrich Schuchardt
• [PATCH v1 3/4] spinand: bind mtdblock   Heinrich Schuchardt
• [PATCH v1 2/4] disk: support MTD partitions   Heinrich Schuchardt
• [PATCH v1 1/4] drivers: introduce mtdblock abstraction   Heinrich Schuchardt
• [PATCH 1/1] dtoc: avoid invalid escape sequence '\s'   Heinrich Schuchardt
• [PATCH 1/1] pylibfdt: fix invalid escape sequence '\w'   Heinrich Schuchardt
• [PATCH] pylibfdt: Fix "invalid escape sequence '\w'" in setup.py   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: install xilinx-bootgen package   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: build fiptool   Heinrich Schuchardt
• [NEXT] Pull request efi-next-2024-02-28   Heinrich Schuchardt
• [PATCH 1/2] board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM   Daniel Schultz
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Quentin Schulz
• [PATCH v5 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [RFC] rockchip: Reset to bootrom download mode on hang   Quentin Schulz
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Quentin Schulz
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Quentin Schulz
• [PATCH] scripts: dtc-version: Don't show error messages   Quentin Schulz
• [PATCH] scripts: dtc-version: Don't show error messages   Quentin Schulz
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 00/20] rockchip: add support for Theobroma JAGUAR SBC-RK3588-AMR   Quentin Schulz
• [PATCH v2 01/20] rockchip: avoid out-of-bounds when computing cpuid   Quentin Schulz
• [PATCH v2 02/20] rockchip: add weak function symbol called at the beginning of misc_init_r   Quentin Schulz
• [PATCH v2 03/20] rockchip: google: gru: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 05/20] rockchip: pine64: pinephone-pro: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 06/20] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 07/20] rockchip: theobroma-systems: puma: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 08/20] rockchip: theobroma-systems: ringneck: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Quentin Schulz
• [PATCH v2 10/20] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Quentin Schulz
• [PATCH v2 11/20] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH v2 12/20] rockchip: rk3588: add constants for some register address spaces   Quentin Schulz
• [PATCH v2 13/20] rockchip: migrate hardware.h inclusion into appropriate files   Quentin Schulz
• [PATCH v2 14/20] rockchip: include asm/io.h directly in asm/arch-rockchip/hardware.h   Quentin Schulz
• [PATCH v2 15/20] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH v2 16/20] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Quentin Schulz
• [PATCH v2 17/20] rockchip: puma-rk3399: MAINTAINERS: use glob for dtses   Quentin Schulz
• [PATCH v2 18/20] rockchip: rk3399-puma: migrate README to doc/board in rST format   Quentin Schulz
• [PATCH v2 19/20] rockchip: ringneck_px30: migrate README to doc/board in rST format   Quentin Schulz
• [PATCH v2 20/20] rockchip: ringneck_px30: update website link   Quentin Schulz
• [PATCH] rockchip: ringneck-px30: put STM32_RST line in input mode instead of output   Quentin Schulz
• [PATCH v2 13/20] rockchip: migrate hardware.h inclusion into appropriate files   Quentin Schulz
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Quentin Schulz
• [PATCH v2 16/20] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Quentin Schulz
• [PATCH 4/4] rockchip: rk3399: regenerate defconfigs   Quentin Schulz
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Quentin Schulz
• [PATCH 2/2] rockchip: rk3399: Update stack and bss addresses   Quentin Schulz
• [PATCH v2 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Quentin Schulz
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Quentin Schulz
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Quentin Schulz
• [PATCH 04/11] board: rockchip: Add a common ROCK Pi 4 target   Quentin Schulz
• [PATCH] rockchip: ringneck-px30: put STM32_RST line in input mode instead of output   Quentin Schulz
• [PATCH v3 00/20] rockchip: add support for Theobroma JAGUAR SBC-RK3588-AMR   Quentin Schulz
• [PATCH v3 01/20] rockchip: avoid out-of-bounds when computing cpuid   Quentin Schulz
• [PATCH v3 02/20] rockchip: add weak function symbol called at the beginning of misc_init_r   Quentin Schulz
• [PATCH v3 03/20] rockchip: google: gru: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 05/20] rockchip: pine64: pinephone-pro: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 06/20] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 07/20] rockchip: theobroma-systems: puma: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 08/20] rockchip: theobroma-systems: ringneck: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH v3 09/20] rockchip: merge misc.c into board.c   Quentin Schulz
• [PATCH v3 10/20] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Quentin Schulz
• [PATCH v3 11/20] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH v3 12/20] rockchip: rk3588: add constants for some register address spaces   Quentin Schulz
• [PATCH v3 13/20] rockchip: migrate hardware.h inclusion into appropriate files   Quentin Schulz
• [PATCH v3 14/20] rockchip: include asm/io.h directly in asm/arch-rockchip/hardware.h   Quentin Schulz
• [PATCH v3 15/20] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH v3 16/20] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Quentin Schulz
• [PATCH v3 17/20] rockchip: puma-rk3399: MAINTAINERS: use glob for dtses   Quentin Schulz
• [PATCH v3 18/20] rockchip: rk3399-puma: migrate README to doc/board in rST format   Quentin Schulz
• [PATCH v3 19/20] rockchip: ringneck_px30: migrate README to doc/board in rST format   Quentin Schulz
• [PATCH v3 20/20] rockchip: ringneck_px30: update website link   Quentin Schulz
• [PATCH 00/16] rockchip: add support for SARADCv2 and RK806 PMIC and regulators   Quentin Schulz
• [PATCH 01/16] rockchip: spi: rk_spi: do not write bytes when in read-only mode   Quentin Schulz
• [PATCH 02/16] regulator: rk8xx: remove unused functions   Quentin Schulz
• [PATCH 03/16] regulator: rk8xx: fix SWITCH enable on RK809   Quentin Schulz
• [PATCH 04/16] regulator: rk8xx: add indirection level for some ldo callbacks   Quentin Schulz
• [PATCH 05/16] power: rk8xx: add support for RK806   Quentin Schulz
• [PATCH 06/16] pmic: reword help text   Quentin Schulz
• [PATCH 07/16] rockchip: adc: rockchip-saradc: use union for preparing for v2   Quentin Schulz
• [PATCH 08/16] rockchip: adc: rockchip-saradc: factor out channel_data callback   Quentin Schulz
• [PATCH 09/16] rockchip: adc: rockchip-saradc: factor out start_channel callback   Quentin Schulz
• [PATCH 10/16] rockchip: adc: rockchip-saradc: factor out stop callback   Quentin Schulz
• [PATCH 11/16] rockchip: adc: rockchip-saradc: add support for RK3588   Quentin Schulz
• [PATCH 12/16] power: pmic: rk8xx: fix duplicate prompt   Quentin Schulz
• [PATCH 13/16] rockchip: jaguar-rk3588: enable SARADC and derivatives   Quentin Schulz
• [PATCH 14/16] adc: add missing depends on ADC for controller drivers   Quentin Schulz
• [PATCH 15/16] button: add missing ADC dependency for BUTTON_ADC   Quentin Schulz
• [PATCH 16/16] rockchip: boot_mode: fix rockchip_dnl_key_pressed requiring ADC support   Quentin Schulz
• [PATCH 05/11] rockchip: io-domain: Add support for RK3399   Quentin Schulz
• [PATCH 05/11] rockchip: io-domain: Add support for RK3399   Quentin Schulz
• [PATCH v2 09/15] gpio: rockchip: Use gpio alias id as gpio bank id   Quentin Schulz
• [PATCH v2 13/15] rockchip: rk3328: Add support to build bootable SPI image   Quentin Schulz
• [PATCH 11/16] rockchip: adc: rockchip-saradc: add support for RK3588   Quentin Schulz
• [PATCH v2 00/16] rockchip: add support for SARADCv2 and RK806 PMIC and regulators   Quentin Schulz
• [PATCH v2 01/16] rockchip: spi: rk_spi: do not write bytes when in read-only mode   Quentin Schulz
• [PATCH v2 02/16] regulator: rk8xx: remove unused functions   Quentin Schulz
• [PATCH v2 03/16] regulator: rk8xx: fix SWITCH enable on RK809   Quentin Schulz
• [PATCH v2 04/16] regulator: rk8xx: add indirection level for some ldo callbacks   Quentin Schulz
• [PATCH v2 05/16] power: rk8xx: add support for RK806   Quentin Schulz
• [PATCH v2 06/16] pmic: reword help text   Quentin Schulz
• [PATCH v2 07/16] rockchip: adc: rockchip-saradc: use union for preparing for v2   Quentin Schulz
• [PATCH v2 08/16] rockchip: adc: rockchip-saradc: factor out channel_data callback   Quentin Schulz
• [PATCH v2 09/16] rockchip: adc: rockchip-saradc: factor out start_channel callback   Quentin Schulz
• [PATCH v2 10/16] rockchip: adc: rockchip-saradc: factor out stop callback   Quentin Schulz
• [PATCH v2 11/16] rockchip: adc: rockchip-saradc: add support for RK3588   Quentin Schulz
• [PATCH v2 12/16] power: pmic: rk8xx: fix duplicate prompt   Quentin Schulz
• [PATCH v2 13/16] rockchip: jaguar-rk3588: enable SARADC and derivatives   Quentin Schulz
• [PATCH v2 14/16] adc: add missing depends on ADC for controller drivers   Quentin Schulz
• [PATCH v2 15/16] button: add missing ADC dependency for BUTTON_ADC   Quentin Schulz
• [PATCH v2 16/16] rockchip: boot_mode: fix rockchip_dnl_key_pressed requiring ADC support   Quentin Schulz
• [PATCH] rockchip: load env from boot MMC device   Quentin Schulz
• [PATCH v2 05/16] power: rk8xx: add support for RK806   Quentin Schulz
• [PATCH 15/15] rockchip: rk3328-orangepi-r1-plus: Enable boot from SPI NOR flash   Tianling Shen
• [PATCH 07/15] rockchip: rk3328-orangepi-r1-plus: Update defconfig   Tianling Shen
• [PATCH v2 06/15] rockchip: rk3328-nanopi-r2: Update defconfig   Tianling Shen
• [PATCH 1/5] xilinx: Fix fpga region DT nodes name   Michal Simek
• [PATCH 2/5] arm64: zynqmp: Remove arm,cortex-a53-edac node   Michal Simek
• [PATCH 3/5] arm64: zynqmp: Align nvmem-fw node with dt-schema   Michal Simek
• [PATCH 4/5] arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1   Michal Simek
• [PATCH 5/5] arm64: zynqmp: Disable DP on kd240   Michal Simek
• [PATCH] soc: zynqmp: Add the IDcode for dr_SE and eg_SE variants   Michal Simek
• [PATCH] arm64: xilinx: Enable EFI_HTTP_BOOT by default   Michal Simek
• [PATCH] arm64: zynqmp: Add 'silabs, skip-recall' to all si570 clk nodes   Michal Simek
• [PATCH] arm64: zynqmp: Sync clock labels with kr260 revB   Michal Simek
• [PATCH] configs: versal_net: Enable CONFIG_LTO for mini qspi/ospi   Michal Simek
• [PATCH] configs: versal: Enable CONFIG_LTO for mini qspi/ospi   Michal Simek
• [PATCH] arm64: zynqmp: Describe 25MHz fixed clock for PL GEMs   Michal Simek
• [PATCH] arm64: zynqmp: Fix kr260 clock wiring   Michal Simek
• [PATCH 1/5] xilinx: Fix fpga region DT nodes name   Michal Simek
• [PATCH] arm64: versal-net: Setup correct addresses of GICR/GICD   Michal Simek
• [PATCH] xilinx: zynqmp: Add the missing function prototype   Michal Simek
• [PATCH] xilinx: zynqmp: Add the missing function prototype   Michal Simek
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Michal Simek
• [PATCH v2] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Michal Simek
• [PATCH] arm64: versal-net: Setup correct addresses of GICR/GICD   Michal Simek
• [PATCH v2 9/9] riscv: Update alignment for some sections in linker scripts   Michal Simek
• [PATCH 0/5] riscv: mbv: Enhance MB-V support with also enabling SPL   Michal Simek
• [PATCH 1/5] riscv: mbv: Align addresses with default DT   Michal Simek
• [PATCH 2/5] riscv: mbv: Enable REMAKE_ELF by default   Michal Simek
• [PATCH 3/5] riscv: mbv: Switch to OF_SEPARATE with fixed address   Michal Simek
• [PATCH 4/5] riscv: mbv: Moving little_endian variable to data section   Michal Simek
• [PATCH 5/5] riscv: mbv: Enable SPL and binman   Michal Simek
• [GIT PULL] xilinx patches for v2024.04-rc3   Michal Simek
• [PATCH v2 17/21] tools: mkfwumdata: migrate to metadata version 2   Michal Simek
• [PATCH v2 18/21] tools: mkfwumdata: add logic to append vendor data to the FWU metadata   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Support semhosting boot method   Michal Simek
• [RESEND PATCH v2] arm64: zynqmp: Support semihosting boot method   Michal Simek
• [PATCH] arm64: zynqmp: Add MTD partition handling for dfu_alt_info generation   Michal Simek
• [PATCH] arm64: zynqmp: Do not describe u-boot.itb if SPL is disabled   Michal Simek
• [PATCH] arm64: zynqmp: Remove snps,enable_guctl1_ipd_quirk property   Michal Simek
• [PATCH] arm64: zynqmp: Add label to pmu fwnode   Michal Simek
• [PATCH] arm64: zynqmp: Add label to pmu fwnode   Michal Simek
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Dragan Simic
• [RFC] rockchip: Reset to bootrom download mode on hang   Dragan Simic
• [RFC] rockchip: spl: Support reading FIT from eMMC boot partition   Dragan Simic
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Dragan Simic
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Dragan Simic
• [PATCH 04/18] rockchip: add weak function symbol called at the beginning of misc_init_r   Dragan Simic
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 07/18] rockchip: pine64: pinephone: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Dragan Simic
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Dragan Simic
• [RFC] rockchip: Reset to bootrom download mode on hang   Dragan Simic
• [PATCH] scripts: dtc-version: Don't show error messages   Dragan Simic
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Dragan Simic
• [PATCH] scripts: dtc-version: Don't show error messages   Dragan Simic
• [PATCH] scripts: dtc-version: Don't show error messages   Dragan Simic
• [PATCH v2] scripts: dtc-version: Don't show error messages   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH 01/15] rockchip: rk3328: Update default u-boot, spl-boot-order prop   Dragan Simic
• [PATCH 03/15] rockchip: rk3328-rock64: Update defconfig   Dragan Simic
• [PATCH 10/15] rng: rockchip: Use same compatible as linux   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH v2 01/20] rockchip: avoid out-of-bounds when computing cpuid   Dragan Simic
• [PATCH v2 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v2 05/20] rockchip: pine64: pinephone-pro: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v2 06/20] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Dragan Simic
• [PATCH v2 10/20] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Dragan Simic
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Dragan Simic
• [PATCH v2 1/7] common: avb_verify: don't call mmc_switch_part for SD   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH 0/4] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Dragan Simic
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Dragan Simic
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Dragan Simic
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Dragan Simic
• [PATCH 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash   Dragan Simic
• [PATCH 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash   Dragan Simic
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Dragan Simic
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Dragan Simic
• [PATCH] doc: rockchip: Clarify the rkspi image format further   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH v2 04/20] rockchip: pine64: pinebook-pro: migrate to rockchip_early_misc_init_r   Dragan Simic
• [PATCH v2 5/5] rockchip: nanopi-r4s: Drop ROCKCHIP_OTP   Dragan Simic
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Dragan Simic
• [PATCH v2 09/20] rockchip: merge misc.c into board.c   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH v2] scripts: dtc-version: Don't show error messages   Dragan Simic
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Dragan Simic
• [PATCH v2] scripts: dtc-version: Don't show error messages   Dragan Simic
• [PATCH v3 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B   Dragan Simic
• [PATCH v2] common: usb-hub: Reset USB 3.0 hubs only   Dragan Simic
• [PATCH v2] scripts: dtc-version: Don't show error messages   Dragan Simic
• How To Move Root Partition From eMMC to SSD   Spam Sink
• [PATCH RFC] sunxi: pinephone: detect existed magnetometer and fixup dtb   Andrey Skvortsov
• [PATCH] sunxi: defconfig: Add pstore support for pinephone   Andrey Skvortsov
• [PATCH] sunxi: defconfig: Add pstore support for pinephone   Andrey Skvortsov
• [PATCH RFC] sunxi: pinephone: detect existed magnetometer and fixup dtb   Andrey Skvortsov
• [PATCH v2 1/1] net: ti: am65-cpsw-nuss: Remove incorrect RGMII_ID bit functionality   Ken Sloat
• [PATCH] arm: dts: k3-am625-verdin-r5: Change CPU frequency to 1000MHz   Vitor Soares
• [PATCH] riscv: Repeat virtio scan   Łukasz Stelmach
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Bruce Sun
• [PATCH v2] qemu-arm: round down memory to multiple of 2MB for LPAE   Oleksandr Suvorov
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Alexander Sverdlin
• [PATCH V6 07/20] configs: am62x_evm_a53_defconfig: Switch to bootstd   Alexander Sverdlin
• [PATCH 1/1] opos6uldev: Convert to watchdog driver model   Sébastien Szymanski
• [PATCH v3 1/1] Makefile: pass -undef option to cmd_gen_envp   Sébastien Szymanski
• [PATCH 1/2] opos6uldev: make the LCD work again   Sébastien Szymanski
• [PATCH 2/2] video: mxsfb: add back imx6ul/imx6ull support   Sébastien Szymanski
• [PATCH] clk: renesas: Fix broken clocks on all Gen2 boards   Niklas Söderlund
• [PATCH v1] doc: imx: imxrt1170: Document imxrt1170-evk board   Jesse T
• [PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse T
• [PATCH v3 1/3] arm: dts: imxrt: Add binman support   Jesse T
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse T
• [PATCH v2] imx: imx8mp: Add support for Polyhex Debix Model A SBC   Gilles Talis
• [PATCH v1] doc: imx: imxrt1170: Document imxrt1170-evk board   Jesse Taube
• [PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse Taube
• [PATCH v2 2/2] imx: imxrt1050-evk: Add documentation for SPI boot   Jesse Taube
• [PATCH v3 1/3] arm: dts: imxrt: Add binman support   Jesse Taube
• [PATCH v3 2/3] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse Taube
• [PATCH v3 3/3] imx: imxrt1050-evk: Add documentation for SPI boot   Jesse Taube
• [PATCH v4 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse Taube
• [PATCH v4 2/2] imx: imxrt1050-evk: Add documentation for SPI boot   Jesse Taube
• [PATCH v10 4/8] spi: spi-uclass: Read chipselect and restrict capabilities   Jagan Teki
• [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY   Jagan Teki
• [PATCH v3 14/17] ARM: dts: rk3328: Enable VOP for bootph-all   Jagan Teki
• [PATCH 0/4] Simplefb and fb reservation related updates   Devarsh Thakkar
• [PATCH 1/4] boot: fdt_simplefb: Enumerate framebuffer info from video handoff   Devarsh Thakkar
• [PATCH 2/4] video: Assume video to be active if SPL is passing video hand-off   Devarsh Thakkar
• [PATCH 3/4] boot: Move framebuffer reservation to separate helper   Devarsh Thakkar
• [PATCH 4/4] board: ti: am62x: evm: Update simple-framebuffer node in device-tree   Devarsh Thakkar
• Help Needed: No UART Output in Mainline U-Boot on MT7620A (ZBT WE826-T2)   Richard Thanki
• [PATCH 1/2] mtd: rawnand: brcmnand: fallback to detected ecc-strengh, ecc-step-size   Mark Tomlinson
• [PATCH 2/2] mtd: rawnand: brcmnand: Allow soc-specific callbacks to work   Mark Tomlinson
• [PATCH] arm: dts: k3-binman: Make optee optional as requirement   Michael Trimarchi
• [PATCH V2] arm: dts: k3-binman: Make optee optional as requirement   Michael Trimarchi
• [PATCH] lib: sparse: Fix error checking for write_sparse_chunk_raw   Michael Nazzareno Trimarchi
• [PATCH v3] mtd: rawnand: Meson NAND controller support   Michael Nazzareno Trimarchi
• [PATCH] arm: dts: k3-binman: Make optee optional as requirement   Michael Nazzareno Trimarchi
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Michael Nazzareno Trimarchi
• [PATCH 04/15] rockchip: rk3328-roc-cc: Update defconfig   Chen-Yu Tsai
• [PATCH 04/15] rockchip: rk3328-roc-cc: Update defconfig   Chen-Yu Tsai
• [PATCH 0/4] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Chen-Yu Tsai
• [PATCH 1/4] rockchip: rk3328: Read cpuid and generate MAC address from efuse   Chen-Yu Tsai
• [PATCH 2/4] rockchip: rk3399: Read cpuid and generate MAC address from efuse   Chen-Yu Tsai
• [PATCH 3/4] rockchip: rk3328: regenerate defconfigs   Chen-Yu Tsai
• [PATCH 4/4] rockchip: rk3399: regenerate defconfigs   Chen-Yu Tsai
• [PATCH 4/4] rockchip: rk3399: regenerate defconfigs   Chen-Yu Tsai
• [PATCH v2 0/5] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Chen-Yu Tsai
• [PATCH v2 1/5] rockchip: rk3328: Read cpuid and generate MAC address from efuse   Chen-Yu Tsai
• [PATCH v2 2/5] rockchip: rk3399: Read cpuid and generate MAC address from efuse   Chen-Yu Tsai
• [PATCH v2 3/5] rockchip: rk3328: regenerate defconfigs   Chen-Yu Tsai
• [PATCH v2 4/5] rockchip: rk3399: regenerate defconfigs   Chen-Yu Tsai
• [PATCH v2 5/5] rockchip: nanopi-r4s: Drop ROCKCHIP_OTP   Chen-Yu Tsai
• [PATCH 0/4] rockchip: Read cpuid and generate MAC address from efuse for RK3328 and RK3399   Chen-Yu Tsai
• [PATCH] clk: renesas: Fix broken clocks on all Gen2 boards   Geert Uytterhoeven
• [PATCH] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Siddharth Vadapalli
• [PATCH] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Siddharth Vadapalli
• [PATCH v2] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Siddharth Vadapalli
• [PATCH] dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()   Siddharth Vadapalli
• [PATCH 07/10] arm: mach-k3: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Marek Vasut
• [PATCH 0/3] usb: ehci-generic: setup a bulk of phy when possible   Marek Vasut
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Marek Vasut
• [PATCH v5 06/11] dts: Add script to uprev dts/upstream subtree   Marek Vasut
• [PATCH 1/5] usb: dwc3-generic: implement Qualcomm wrapper   Marek Vasut
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Marek Vasut
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Marek Vasut
• [PATCH] spi: mxc_spi: Add imx6ul-ecspi compatible string   Marek Vasut
• [PATCH] ARM: imx: Let SPL configure ECSPI1 clock on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH v2] spi: mxc_spi: Add imx6ul-ecspi compatible string   Marek Vasut
• [PATCH] clk: renesas: Fix broken clocks on all Gen2 boards   Marek Vasut
• [PULL] u-boot-sh/master-779h0-r2   Marek Vasut
• [PATCH 1/3] ARM: renesas: Disable EFI on R-Car Gen2   Marek Vasut
• [PATCH 2/3] ARM: renesas: Set R-Car Gen2 board size limit to 512 kiB   Marek Vasut
• [PATCH 3/3] ARM: renesas: Enable LTO on R-Car   Marek Vasut
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Marek Vasut
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Marek Vasut
• [FIX PATCH v1] Fix: common: usb_hub: Reset only USB3.0 hub   Marek Vasut
• [PATCH v1] MAINTAINERS: add custodian tree info for AV/AVB   Marek Vasut
• [PULL] u-boot-sh/master-porter   Marek Vasut
• [PATCH] usb: ehci-mx6: Add i.MX93 support   Marek Vasut
• [PATCH v2 1/5] usb: ohci-generic: ignore ENOSYS and ENOTSUPP errors from clk and reset   Marek Vasut
• [PATCH v2] common: usb-hub: Reset USB 3.0 hubs only   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] mmc: Drop unused mmc_send_tuning() cmd_error parameter   Marek Vasut
• [PATCH 1/3] mmc: Convert hs400_tuning flag from u8 to bool   Marek Vasut
• [PATCH 2/3] mmc: Add generic tuning flag   Marek Vasut
• [PATCH 3/3] mmc: renesas-sdhi: Do not access SCC during tuning in send_cmd callback   Marek Vasut
• [PATCH] mmc: tmio: Check INFO1 for completion during DMA transfer   Marek Vasut
• [PATCH] mmc: renesas-sdhi: Stop transmission in case tuning block transfer fails   Marek Vasut
• [PATCH v2] common: usb-hub: Reset USB 3.0 hubs only   Marek Vasut
• [PATCH v2] usb: ehci-mx6: Add i.MX93 support   Marek Vasut
• [PATCH] mmc: Drop unused mmc_send_tuning() cmd_error parameter   Marek Vasut
• [PATCH 1/3] mmc: Convert hs400_tuning flag from u8 to bool   Marek Vasut
• [PATCH 0/7] imx8mp: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 2/7] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH 3/7] imx8mp: power-domain: Add PCIe support   Marek Vasut
• [PATCH 4/7] imx8mp: power-domain: Expose high performance PLL clock   Marek Vasut
• [PATCH 5/7] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH 6/7] pci: Add DW PCIe controller support for iMX8MP SoC   Marek Vasut
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 2/7] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH 3/7] imx8mp: power-domain: Add PCIe support   Marek Vasut
• [PATCH 4/7] imx8mp: power-domain: Expose high performance PLL clock   Marek Vasut
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 0/7] imx8mp: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 5/7] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH 6/7] pci: Add DW PCIe controller support for iMX8MP SoC   Marek Vasut
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marek Vasut
• [PATCH 1/6] usb: xhci: refactor xhci_set_configuration   Marek Vasut
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Marek Vasut
• [PATCH 3/6] usb: xhci: Abort transfers with unallocated rings   Marek Vasut
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Marek Vasut
• [PATCH 6/6] usb: kbd: Add probe quirk for Apple and Keychron keyboards   Marek Vasut
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marek Vasut
• [PATCH v2 1/3] mmc: Convert hs400_tuning flag from u8 to bool   Marek Vasut
• [PATCH v2 2/3] mmc: Add generic tuning flag   Marek Vasut
• [PATCH v2 3/3] mmc: renesas-sdhi: Do not access SCC during tuning in send_cmd callback   Marek Vasut
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Marek Vasut
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Marek Vasut
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Marek Vasut
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Marek Vasut
• [PATCH v2 1/8] clk: imx8mp: Add support for PCIe clocks   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 3/8] imx8mp: power-domain: Add PCIe support   Marek Vasut
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Marek Vasut
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH v2 6/8] pci: Add DW PCIe controller support for iMX8MP SoC   Marek Vasut
• [PATCH v2 8/8] MAINTAINERS: Add entry for PCIe DWC IMX driver   Marek Vasut
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Marek Vasut
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 2/8] reset: imx: Add support for i.MX8MP reset controller   Marek Vasut
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH v2 4/8] imx8mp: power-domain: Expose high performance PLL clock   Marek Vasut
• [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY   Marek Vasut
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Marek Vasut
• [PATCH 4/6] usb: kbd: Ignore Yubikeys   Marek Vasut
• [PATCH 2/6] usb: xhci: Set up endpoints for the first 2 interfaces   Marek Vasut
• [PATCH v2 5/7] sysreset: Support reset via Renesas RAA215300 PMIC   Marek Vasut
• [PATCH v2 6/7] pmic: raa215300: Bind sysreset driver   Marek Vasut
• [PATCH v2 6/7] pmic: raa215300: Bind sysreset driver   Marek Vasut
• [PATCH v2 7/7] board: rzg2l: Support reset via Renesas RAA215300 PMIC   Marek Vasut
• [PATCH v2 4/7] pmic: Add Renesas RAA215300 PMIC driver   Marek Vasut
• [PATCH v2 3/7] i2c: rzg2l: Add I2C driver for RZ/G2L family   Marek Vasut
• [PATCH 00/19] ARM: renesas: Rename R-Mobile to Renesas   Marek Vasut
• [PATCH 01/19] ARM: renesas: Drop remnants of R8A7740 support   Marek Vasut
• [PATCH 02/19] ARM: renesas: Drop unused sh_sdhi.h   Marek Vasut
• [PATCH 03/19] ARM: renesas: Drop unused mmc.h   Marek Vasut
• [PATCH 04/19] ARM: renesas: Drop unused pfc-r8a7790.h   Marek Vasut
• [PATCH 05/19] ARM: renesas: Rename rmobile_get_cpu_type() to renesas_get_cpu_type()   Marek Vasut
• [PATCH 06/19] ARM: renesas: Rename rmobile_get_cpu_rev_*() to renesas_get_cpu_rev_*()   Marek Vasut
• [PATCH 07/19] ARM: renesas: Rename RMOBILE_CPU_TYPE_* to RENESAS_CPU_TYPE_*   Marek Vasut
• [PATCH 08/19] ARM: renesas: Rename rmobile_cpuinfo_idx() to renesas_cpuinfo_idx()   Marek Vasut
• [PATCH 09/19] ARM: renesas: Rename rmobile_cpuinfo[] to renesas_cpuinfo[]   Marek Vasut
• [PATCH 10/19] ARM: renesas: Simplify weak symbols   Marek Vasut
• [PATCH 11/19] ARM: renesas: Rename rmobile_get_prr() to renesas_get_prr()   Marek Vasut
• [PATCH 12/19] ARM: renesas: Rename ARCH_RMOBILE_BOARD_STRING to ARCH_RENESAS_BOARD_STRING   Marek Vasut
• [PATCH 13/19] ARM: renesas: Rename CONFIG_ARCH_RMOBILE_EXTRAM_BOOT to CONFIG_RENESAS_EXTRAM_BOOT   Marek Vasut
• [PATCH 14/19] ARM: renesas: Rename rmobile.h to renesas.h   Marek Vasut
• [PATCH 15/19] ARM: renesas: Rename ARCH_RMOBILE to ARCH_RENESAS   Marek Vasut
• [PATCH 16/19] ARM: renesas: Rename arch-/mach-rmobile to arch-/mach-renesas   Marek Vasut
• [PATCH 17/19] ARM: renesas: Post rename fix ups   Marek Vasut
• [PATCH 18/19] mmc: renesas-sdhi: Rename rmobile_is_gen3_mmc0() to rcar_is_gen3_mmc0()   Marek Vasut
• [PATCH 19/19] git-mailrc: Add renesas entry and update rmobile entry   Marek Vasut
• [PATCH v3 4/8] pmic: Add Renesas RAA215300 PMIC driver   Marek Vasut
• [PATCH v3 5/8] board: rzg2l: Enable access to Renesas RAA215300 PMIC   Marek Vasut
• [PATCH] Added FDT PAD memory size while reserving memory for FDT to avoid some memory corruption issue   Selvakumar Velandi
• [PATCH] Added FDT PAD memory size while reserving memory for FDT to avoid some memory corruption issue   Selvakumar Velandi
• [PATCH] Added FDT PAD memory size while reserving memory for FDT to avoid some memory corruption issue   Selvakumar Velandi
• Booting RPi5B with latest git   Stefan Wahren
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Linus Walleij
• [PATCH] mmc: arm_pl180_mmci: Rely on DM   Linus Walleij
• Bug: PDF documentation doesn't build according to instructions   Patrick Walton
• [PATCH] configs: am64x_evm_r5_defconfig: enlarge simple malloc pool   Thomas Weißschuh
• [PATCH] doc: fix mistyped "env flags" command   Thomas Weißschuh
• [PATCH] log: make global data relocatable   Thomas Weißschuh
• [PATCH] bootdev: drop unnecessary assert on bootflow->bdev   Thomas Weißschuh
• [PATCH] log: fixup log_head after relocating global data   Thomas Weißschuh
• [PATCH v2 1/5] usb: ohci-generic: ignore ENOSYS and ENOTSUPP errors from clk and reset   Piotr Wojtaszczyk
• [PATCH v3 1/5] usb: ohci-generic: ignore ENOSYS and ENOTSUPP errors from clk and reset   Piotr Wojtaszczyk
• ECDSA related PRs   Bob Wolff
• [PATCH] ecdsa: Avoid null pointer crash in ecdsa-verify due to absent property   Bob Wolff
• [PATCH] Check curve_name for null to avoid crash   Bob Wolff
• ECDSA related PRs   Bob Wolff
• [PATCH] Check curve_name for null to avoid crash   Bob Wolff
• ECDSA related PRs   Bob Wolff
• [PATCH] rockchip: rock64: store env in SPI flash   Ben Wolsieffer
• [PATCH] rockchip: rock64: store env in SPI flash   Ben Wolsieffer
• [PATCH] rockchip: load env from boot MMC device   Ben Wolsieffer
• [PATCH 0/3] usb: ehci-generic: setup a bulk of phy when possible   Yang Xiwen
• [PATCH] poplar: add myself as co-maintainer   Yang Xiwen
• [PATCH] poplar: add myself as co-maintainer   Yang Xiwen
• [PATCH] poplar: add myself as co-maintainer   Yang Xiwen
• [PATCH 1/3] usb: dwc3: handle return value of clk_get_rate() correctly   Yang Xiwen
• [PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs   Yang Xiwen
• [PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs   Yang Xiwen
• [PATCH RESEND] serial: pl01x: set baudrate when probing   Yang Xiwen
• [PATCH 13/15] rockchip: rk3328: Add support to build bootable SPI image   Da Xue
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Masahiro Yamada
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Masahiro Yamada
• [PATCH] rockchip: rk3588-evb: Enable USB support   Andy Yan
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH v2 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB   Andy Yan
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH v3 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH v3 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB   Andy Yan
• [PATCH] rockchip: board: Add minimal generic RK3588S/RK3588 board   Kever Yang
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Kever Yang
• [PATCH 18/18] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Kever Yang
• [PATCH 01/18] rockchip: rk3588: use mainline pmu-grf compatible   Kever Yang
• [PATCH 02/18] rockchip: rk3588: sync rk3588s dtsi from v6.8-rc1   Kever Yang
• [PATCH 03/18] rockchip: avoid out-of-bounds when computing cpuid   Kever Yang
• [PATCH 04/18] rockchip: add weak function symbol called at the beginning of misc_init_r   Kever Yang
• [PATCH 05/18] rockchip: google: gru: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 07/18] rockchip: pine64: pinephone: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 09/18] rockchip: theobroma-systems: puma: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 10/18] rockchip: theobroma-systems: ringneck: migrate to rockchip_early_misc_init_r   Kever Yang
• [PATCH 11/18] rockchip: merge misc.c into board.c   Kever Yang
• [PATCH 12/18] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Kever Yang
• [PATCH 14/18] rockchip: rk3588: add constants for some register address spaces   Kever Yang
• [PATCH 16/18] rockchip: include asm/io.h directly in asm/arch-rockchip/hardware.h   Kever Yang
• [PATCH 1/7] rockchip: rk356x: Sync device tree from linux v6.7   Kever Yang
• [PATCH 2/7] rockchip: rk356x: Sync device tree from linux v6.8-rc1   Kever Yang
• [PATCH 3/7] rockchip: rk356x: Move common uart2 props to rk356x-u-boot.dtsi   Kever Yang
• [PATCH 5/7] rockchip: rk3588: Sync device tree from linux v6.8-rc1   Kever Yang
• [PATCH 6/7] rockchip: rk3588: Add default u-boot,spl-boot-order prop   Kever Yang
• [PATCH 7/7] rockchip: rk35xx: Remove unnecessary status props   Kever Yang
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Kever Yang
• [PATCH 2/3] rockchip: rk356x: Enable eMMC HS200 mode   Kever Yang
• [PATCH 3/3] rockchip: rk3588: Enable eMMC HS200 mode   Kever Yang
• [PATCH 1/2] net: designware: Reset eth phy before phy connect   Kever Yang
• [PATCH 2/2] rockchip: rk3328-rock-pi-e: Enable DM_ETH_PHY and PHY_REALTEK   Kever Yang
• [PATCH 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Kever Yang
• [PATCH 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB   Kever Yang
• [PATCH v2 1/6] arm: dts: rockchip: Sync rv1126 dts from linux 6.8-rc1   Kever Yang
• [PATCH v2 2/6] ram: rockchip: Add rv1126 ddr4 support   Kever Yang
• [PATCH v2 3/6] rockchip: Convert rv1126 to standard boot   Kever Yang
• [PATCH v2 4/6] board: rockchip: Add Sonoff iHost board   Kever Yang
• [PATCH v2 5/6] rockchip: rv1126: select SPL_OPTEE_IMAGE   Kever Yang
• [PATCH v2 6/6] rockchip: rv1126: Move RAM disk address   Kever Yang
• [PATCH] rockchip: rk3588-quartzpro64: Enable AHCI, PCI and USB   Kever Yang
• [PATCH v5 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Kever Yang
• [PATCH v3] rockchip: spl: Enable caches to speed up checksum validation   Kever Yang
• [PATCH v2 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Kever Yang
• [PATCH v2 2/3] rockchip: rk35xx: Enable eMMC HS200 mode by default   Kever Yang
• [PATCH v2 3/3] mmc: rockchip_sdhci: Fix HS400 mode write on RK3568   Kever Yang
• [PATCH] rockchip: rk3588-evb: Enable USB support   Kever Yang
• [PATCH] board: rockchip: Add Pine64 PineTab2   Kever Yang
• [PATCH] rockchip: rk3568-generic: Enable eMMC HS200 mode   Kever Yang
• [RFC] rockchip: Reset to bootrom download mode on hang   Kever Yang
• [PATCH 1/4] arm: dts: rockchip: rk3566: Remove unnecessary clks from rgxx3   Kever Yang
• [PATCH 2/4] board: rockchip: Add support for Powkiddy RGB10MAX3   Kever Yang
• [PATCH 3/4] configs: Remove unnecessary options from RGxx3 config   Kever Yang
• [PATCH 4/4] board: rockchip: Add early ADC button detect for RGxx3   Kever Yang
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Kever Yang
• Pull request: u-boot-rockchip-20240207   Kever Yang
• [PATCH] rockchip: ringneck-px30: put STM32_RST line in input mode instead of output   Kever Yang
• [PATCH v2] imx: imx8mp: Add support for Polyhex Debix Model A SBC   Milan Zamazal
• [PATCH] board: rockchip: add Rockchip Toybrick TB-RK3588X board   Elon Zhang
• [PATCH 1/2] cli: allow users to disable history if unused at all   Hanyuan Zhao
• [PATCH 2/2] cli: allow users to determine history buffer allocation method   Hanyuan Zhao
• REGRESSION: [PATCH 5/9] toradex: Use checkboard() instead of show_board_info()   Marcel Ziswiler
• [PATCH v1 0/7] toradex: fix reset and hardware detection regressions   Marcel Ziswiler
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Marcel Ziswiler
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marcel Ziswiler
• [PATCH v1 5/7] toradex: common: Add sysinfo driver   Marcel Ziswiler
• [PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support   Marcel Ziswiler
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Marcel Ziswiler
• [PATCH v10 12/15] arm: dts: Introduce am69-sk u-boot dts files   Marcel Ziswiler
• [PATCH v10 11/15] arm: dts: Introduce j784s4 u-boot dts files   Marcel Ziswiler
• [PATCH v10 13/15] configs: j784s4_evm: Add defconfig for J784S4 EVM board   Marcel Ziswiler
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Marcel Ziswiler
• [PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support   Marcel Ziswiler
• [PATCH v1] armv8: crypto: SHA-512 using ARMv8 Crypto Extensions   Marc Zyngier
• [PATCH] riscv: sifive: fu740: reduce DDR speed from 1866MT/s to 1600MT/s   thomas.perrot at bootlin.com
• [PATCH v2 00/21] FWU: Migrate FWU metadata to version 2   Etienne CARRIERE - foss
• [PATCH] net: macb: Add support for fixed link   belouargamohamed at gmail.com
• [PATCH] net: macb: Add support for fixed link   belouargamohamed at gmail.com
• [PATCH v2 1/1] drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA   wan.yee.lau at intel.com
• [PATCH] xyzModem: Correct xmodem blk verification conditions   jihongbin
• [PATCH] xyzModem: Correct xmodem blk verification conditions   jihongbin
• [PULL] Please pull u-boot-amlogic-fixes-20240223   neil.armstrong at linaro.org
• [PATCH] mmc: arm_pl180: Limit data transfer to U16_MAX   cmax at mailbox.org
• [PATCH] implement policy_pcr commands to lock NV-indexes behind a PCR   niek.nooijens at omron.com
• [PATCH] implement policy_pcr commands to lock NV-indexes behind a PCR   niek.nooijens at omron.com
• [PATCH] implement policy_pcr commands to lock NV-indexes behind a PCR   niek.nooijens at omron.com
• How To Move Root Partition From eMMC to SSD   spamsink
• [PATCH] arm64: zynqmp: Add label to pmu fwnode   lukas.funke-oss at weidmueller.com