Warning: eth0 MAC addresses don't match:

[Embedded]

We are trying to move a board from QSDK to OpenWRT, however, once we had 
the image built and flashed bootipq exited with


Net:   MAC0 addr:44:d1:fa:a4:f1:66
PHY ID1: 0x4d
PHY ID2: 0xd101
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
, eth0
Warning: eth0 MAC addresses don't match:
Address in SROM is         44:d1:fa:a4:f1:66
Address in environment is  44:d1:fa:a4:f1:67

and printenv shows

IPQ6018# printenv
baudrate=115200
bootargs=console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs 
rootfstype=squashfs rootwait ubi.mtd=rootfs root=mtd:ubi_rootfs 
rootfstype=squashfs rootwait ubi.mtd=rootfs root=mtd:ubi_rootfs 
rootfstype=squt
bootcmd=bootipq
bootdelay=2
eth1addr=44:d1:fa:a4:f1:67
eth2addr=44:d1:fa:a4:f1:68
eth3addr=44:d1:fa:a4:f1:69
eth4addr=44:d1:fa:a4:f1:6a
ethact=eth0
ethaddr=44:d1:fa:a4:f1:66
fdt_high=0x48500000
fdtcontroladdr=4a46e7d0
flash_type=7
fsbootargs=ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs
ipaddr=192.168.10.10
machid=8030000
mtddevname=fs
mtddevnum=0
mtdids=nand0=nand0
mtdparts=mtdparts=nand0:0x3c00000 at 0x0(fs),
netmask=255.255.255.0
partition=nand0,0
serverip=192.168.10.1
soc_version_major=1
soc_version_minor=0
stderr=serial at 78B1000
stdin=serial at 78B1000
stdout=serial at 78B1000

Environment size: 887/65532 bytes

SO how can i resolve booting this device? 
-- 
Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com