[PATCH v2 1/3] arm: dts: armada-38x-solidrun-microsom: configure i2c0 bus
Josua Mayer
josua at solid-run.com
Fri Feb 2 16:13:32 CET 2024
SolidRun Armada-388 SoM has an i2c bus supporting on-som eeprom, and
peripherals on a carrier.
armada-38x.dtsi disables this bus by default, it should be enabled by
som or carrier dts.
Linux has moved i2c0 from helios-4 board dts to som dtsi, including
status, pinctrl and clock speed.
Copy these settings from mainline.
This fixes accessing i2c bus from u-boot commandline.
Signed-off-by: Josua Mayer <josua at solid-run.com>
---
arch/arm/dts/armada-38x-solidrun-microsom.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi
index f6ae784bed..1540162e03 100644
--- a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi
@@ -99,6 +99,11 @@
};
&i2c0 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
eeprom at 53 {
compatible = "atmel,24c02";
reg = <0x53>;
--
2.35.3
More information about the U-Boot
mailing list