[PATCH RFC] pinctrl: add support for HiSilicon HiSTB SoCs

[Tom Rini]

On Tue, Feb 13, 2024 at 01:02:50AM +0800, Yang Xiwen wrote:
> On 2/13/2024 12:58 AM, Tom Rini wrote:
> > On Tue, Feb 13, 2024 at 12:30:15AM +0800, Yang Xiwen via B4 Relay wrote:
> > 
> > > From: Yang Xiwen <forbidden405 at outlook.com>
> > > 
> > > The first supported SoC is Hi3798MV200.
> > > 
> > > Signed-off-by: Yang Xiwen <forbidden405 at outlook.com>
> > > ---
> > > This patchset adds support for HiSTB ioconfig module. The module is used
> > > to set pins config(e.g. pull-up, pull-down, drive-strength etc..) and
> > > pinmux.
> > > 
> > > The first supported chip is Hi3798MV200. Adding support for Hi3798CV200
> > > should be also easy.
> > > 
> > > Below is an example of the dts node:
> > [snip]
> > 
> > Has this binding already been accepted to the kernel? Thanks.
> > 
> No, I've not wrote the driver for linux yet. That's why it is RFC now. But
> it is expected to be soon. I'm going to finish u-boot part first and work on
> linux kernel later. After that, i can sync linux dts and bindings back to
> u-boot.

How soon before you start on the Linux side of things? Given that this
wouldn't be merged for v2024.04, there's plenty of time to get that
Linux side going (or at least the binding reviewed and accepted to -next
or similar) before merging here, and for U-Boot the biggest feedback
(aside from anything checkpatch.pl may say) would be to get the binding
reviewed.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20240212/e280bb5e/attachment.sig>