[PATCH v4 29/39] dts: sdm845: replace with upstream DTS

Sumit Garg sumit.garg at linaro.org
Tue Feb 20 15:04:18 CET 2024


On Fri, 16 Feb 2024 at 02:22, Caleb Connolly <caleb.connolly at linaro.org> wrote:
>
> Import sdm845.dtsi from upstream, as well as the upstream DTS files for
> the db845c and Samsung starqltechn. Delete the old board files.
>
> Taken from kernel tag v6.7
>
> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>  arch/arm/dts/Makefile                              |    4 +-
>  arch/arm/dts/dragonboard845c-uboot.dtsi            |   26 -
>  arch/arm/dts/dragonboard845c.dts                   |   48 -
>  arch/arm/dts/sdm845-db845c.dts                     | 1190 ++++
>  .../arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi |   16 +
>  arch/arm/dts/sdm845-samsung-starqltechn.dts        |  460 ++
>  arch/arm/dts/sdm845.dtsi                           | 5801 +++++++++++++++++++-
>  arch/arm/dts/starqltechn-uboot.dtsi                |   27 -
>  arch/arm/dts/starqltechn.dts                       |   68 -
>  configs/qcom_defconfig                             |    2 +-
>  10 files changed, 7386 insertions(+), 256 deletions(-)
>

Reviewed-by: Sumit Garg <sumit.garg at linaro.org>

-Sumit

> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 751035a577f6..3f4e49b3e445 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -633,8 +633,8 @@ dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
>
>  dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
>         dragonboard820c.dtb \
> -       dragonboard845c.dtb \
> -       starqltechn.dtb \
> +       sdm845-db845c.dtb \
> +       sdm845-samsung-starqltechn.dtb \
>         qcs404-evb.dtb
>
>  dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
> diff --git a/arch/arm/dts/dragonboard845c-uboot.dtsi b/arch/arm/dts/dragonboard845c-uboot.dtsi
> deleted file mode 100644
> index 775f45c0149f..000000000000
> --- a/arch/arm/dts/dragonboard845c-uboot.dtsi
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * U-Boot addition to handle Qualcomm Robotics RB3 Development Platform
> - * (dragonboard845c) pins
> - *
> - * (C) Copyright 2022 Sumit Garg <sumit.garg at linaro.org>
> - */
> -
> -/
> -{
> -       soc {
> -               bootph-all;
> -
> -               serial at a84000 {
> -                       bootph-all;
> -               };
> -
> -               clock-controller at 100000 {
> -                       bootph-all;
> -               };
> -
> -               pinctrl at 3400000 {
> -                       bootph-all;
> -               };
> -       };
> -};
> diff --git a/arch/arm/dts/dragonboard845c.dts b/arch/arm/dts/dragonboard845c.dts
> deleted file mode 100644
> index 054f253eb32a..000000000000
> --- a/arch/arm/dts/dragonboard845c.dts
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Qualcomm Robotics RB3 Development (dragonboard845c) board device
> - * tree source
> - *
> - * (C) Copyright 2022 Sumit Garg <sumit.garg at linaro.org>
> - */
> -
> -/dts-v1/;
> -
> -#include "sdm845.dtsi"
> -
> -/ {
> -       model = "Thundercomm Dragonboard 845c";
> -       compatible = "thundercomm,db845c", "qcom,sdm845";
> -       #address-cells = <2>;
> -       #size-cells = <2>;
> -
> -       chosen {
> -               stdout-path = "serial0:115200n8";
> -       };
> -
> -       aliases {
> -               serial0 = &uart9;
> -       };
> -
> -       memory {
> -               device_type = "memory";
> -               reg = <0 0x80000000 0 0xfdfa0000>;
> -       };
> -
> -       psci {
> -               compatible = "arm,psci-1.0";
> -               method = "smc";
> -       };
> -
> -       soc: soc {
> -               serial at a84000 {
> -                       status = "okay";
> -               };
> -       };
> -};
> -
> -&pm8998_resin {
> -       status = "okay";
> -};
> -
> -#include "dragonboard845c-uboot.dtsi"
> diff --git a/arch/arm/dts/sdm845-db845c.dts b/arch/arm/dts/sdm845-db845c.dts
> new file mode 100644
> index 000000000000..c7eba6c491be
> --- /dev/null
> +++ b/arch/arm/dts/sdm845-db845c.dts
> @@ -0,0 +1,1190 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019, Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
> +#include "sdm845.dtsi"
> +#include "sdm845-wcd9340.dtsi"
> +#include "pm8998.dtsi"
> +#include "pmi8998.dtsi"
> +
> +/ {
> +       model = "Thundercomm Dragonboard 845c";
> +       compatible = "thundercomm,db845c", "qcom,sdm845";
> +       qcom,msm-id = <341 0x20001>;
> +       qcom,board-id = <8 0>;
> +
> +       aliases {
> +               serial0 = &uart9;
> +               serial1 = &uart6;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       /* Fixed crystal oscillator dedicated to MCP2517FD */
> +       clk40M: can-clock {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <40000000>;
> +       };
> +
> +       dc12v: dc12v-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "DC12V";
> +               regulator-min-microvolt = <12000000>;
> +               regulator-max-microvolt = <12000000>;
> +               regulator-always-on;
> +       };
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +               autorepeat;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&vol_up_pin_a>;
> +
> +               key-vol-up {
> +                       label = "Volume Up";
> +                       linux,code = <KEY_VOLUMEUP>;
> +                       gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
> +               };
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led-0 {
> +                       label = "green:user4";
> +                       function = LED_FUNCTION_INDICATOR;
> +                       color = <LED_COLOR_ID_GREEN>;
> +                       gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "panic-indicator";
> +                       default-state = "off";
> +               };
> +
> +               led-1 {
> +                       label = "yellow:wlan";
> +                       function = LED_FUNCTION_WLAN;
> +                       color = <LED_COLOR_ID_YELLOW>;
> +                       gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "phy0tx";
> +                       default-state = "off";
> +               };
> +
> +               led-2 {
> +                       label = "blue:bt";
> +                       function = LED_FUNCTION_BLUETOOTH;
> +                       color = <LED_COLOR_ID_BLUE>;
> +                       gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "bluetooth-power";
> +                       default-state = "off";
> +               };
> +       };
> +
> +       hdmi-out {
> +               compatible = "hdmi-connector";
> +               type = "a";
> +
> +               port {
> +                       hdmi_con: endpoint {
> +                               remote-endpoint = <&lt9611_out>;
> +                       };
> +               };
> +       };
> +
> +       reserved-memory {
> +               /* Cont splash region set up by the bootloader */
> +               cont_splash_mem: framebuffer at 9d400000 {
> +                       reg = <0x0 0x9d400000 0x0 0x2400000>;
> +                       no-map;
> +               };
> +       };
> +
> +       lt9611_1v8: lt9611-vdd18-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "LT9611_1V8";
> +
> +               vin-supply = <&vdc_5v>;
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +
> +               gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +       };
> +
> +       lt9611_3v3: lt9611-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "LT9611_3V3";
> +
> +               vin-supply = <&vdc_3v3>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               /*
> +                * TODO: make it possible to drive same GPIO from two clients
> +                * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
> +                * enable-active-high;
> +                */
> +       };
> +
> +       pcie0_1p05v: pcie-0-1p05v-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "PCIE0_1.05V";
> +
> +               vin-supply = <&vbat>;
> +               regulator-min-microvolt = <1050000>;
> +               regulator-max-microvolt = <1050000>;
> +
> +               /*
> +                * TODO: make it possible to drive same GPIO from two clients
> +                * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
> +                * enable-active-high;
> +                */
> +       };
> +
> +       cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "CAM0_DVDD_1V2";
> +               regulator-min-microvolt = <1200000>;
> +               regulator-max-microvolt = <1200000>;
> +               enable-active-high;
> +               gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
> +               vin-supply = <&vbat>;
> +       };
> +
> +       cam0_avdd_2v8: cam0-avdd-2v8-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "CAM0_AVDD_2V8";
> +               regulator-min-microvolt = <2800000>;
> +               regulator-max-microvolt = <2800000>;
> +               enable-active-high;
> +               gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&cam0_avdd_2v8_en_default>;
> +               vin-supply = <&vbat>;
> +       };
> +
> +       /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
> +       cam3_avdd_2v8: cam3-avdd-2v8-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "CAM3_AVDD_2V8";
> +               regulator-min-microvolt = <2800000>;
> +               regulator-max-microvolt = <2800000>;
> +               regulator-always-on;
> +               vin-supply = <&vbat>;
> +       };
> +
> +       pcie0_3p3v_dual: vldo-3v3-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VLDO_3V3";
> +
> +               vin-supply = <&vbat>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pcie0_pwren_state>;
> +       };
> +
> +       v5p0_hdmiout: v5p0-hdmiout-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "V5P0_HDMIOUT";
> +
> +               vin-supply = <&vdc_5v>;
> +               regulator-min-microvolt = <500000>;
> +               regulator-max-microvolt = <500000>;
> +
> +               /*
> +                * TODO: make it possible to drive same GPIO from two clients
> +                * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
> +                * enable-active-high;
> +                */
> +       };
> +
> +       vbat: vbat-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VBAT";
> +
> +               vin-supply = <&dc12v>;
> +               regulator-min-microvolt = <4200000>;
> +               regulator-max-microvolt = <4200000>;
> +               regulator-always-on;
> +       };
> +
> +       vbat_som: vbat-som-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VBAT_SOM";
> +
> +               vin-supply = <&dc12v>;
> +               regulator-min-microvolt = <4200000>;
> +               regulator-max-microvolt = <4200000>;
> +               regulator-always-on;
> +       };
> +
> +       vdc_3v3: vdc-3v3-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VDC_3V3";
> +               vin-supply = <&dc12v>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-always-on;
> +       };
> +
> +       vdc_5v: vdc-5v-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VDC_5V";
> +
> +               vin-supply = <&dc12v>;
> +               regulator-min-microvolt = <500000>;
> +               regulator-max-microvolt = <500000>;
> +               regulator-always-on;
> +       };
> +
> +       vreg_s4a_1p8: vreg-s4a-1p8 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vreg_s4a_1p8";
> +
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +               regulator-always-on;
> +       };
> +
> +       vph_pwr: vph-pwr-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vph_pwr";
> +
> +               vin-supply = <&vbat_som>;
> +       };
> +};
> +
> +&adsp_pas {
> +       status = "okay";
> +
> +       firmware-name = "qcom/sdm845/adsp.mbn";
> +};
> +
> +&apps_rsc {
> +       regulators-0 {
> +               compatible = "qcom,pm8998-rpmh-regulators";
> +               qcom,pmic-id = "a";
> +               vdd-s1-supply = <&vph_pwr>;
> +               vdd-s2-supply = <&vph_pwr>;
> +               vdd-s3-supply = <&vph_pwr>;
> +               vdd-s4-supply = <&vph_pwr>;
> +               vdd-s5-supply = <&vph_pwr>;
> +               vdd-s6-supply = <&vph_pwr>;
> +               vdd-s7-supply = <&vph_pwr>;
> +               vdd-s8-supply = <&vph_pwr>;
> +               vdd-s9-supply = <&vph_pwr>;
> +               vdd-s10-supply = <&vph_pwr>;
> +               vdd-s11-supply = <&vph_pwr>;
> +               vdd-s12-supply = <&vph_pwr>;
> +               vdd-s13-supply = <&vph_pwr>;
> +               vdd-l1-l27-supply = <&vreg_s7a_1p025>;
> +               vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
> +               vdd-l3-l11-supply = <&vreg_s7a_1p025>;
> +               vdd-l4-l5-supply = <&vreg_s7a_1p025>;
> +               vdd-l6-supply = <&vph_pwr>;
> +               vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> +               vdd-l9-supply = <&vreg_bob>;
> +               vdd-l10-l23-l25-supply = <&vreg_bob>;
> +               vdd-l13-l19-l21-supply = <&vreg_bob>;
> +               vdd-l16-l28-supply = <&vreg_bob>;
> +               vdd-l18-l22-supply = <&vreg_bob>;
> +               vdd-l20-l24-supply = <&vreg_bob>;
> +               vdd-l26-supply = <&vreg_s3a_1p35>;
> +               vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
> +
> +               vreg_s3a_1p35: smps3 {
> +                       regulator-min-microvolt = <1352000>;
> +                       regulator-max-microvolt = <1352000>;
> +               };
> +
> +               vreg_s5a_2p04: smps5 {
> +                       regulator-min-microvolt = <1904000>;
> +                       regulator-max-microvolt = <2040000>;
> +               };
> +
> +               vreg_s7a_1p025: smps7 {
> +                       regulator-min-microvolt = <900000>;
> +                       regulator-max-microvolt = <1028000>;
> +               };
> +
> +               vreg_l1a_0p875: ldo1 {
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l5a_0p8: ldo5 {
> +                       regulator-min-microvolt = <800000>;
> +                       regulator-max-microvolt = <800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l12a_1p8: ldo12 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l7a_1p8: ldo7 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l13a_2p95: ldo13 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l17a_1p3: ldo17 {
> +                       regulator-min-microvolt = <1304000>;
> +                       regulator-max-microvolt = <1304000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l20a_2p95: ldo20 {
> +                       regulator-min-microvolt = <2960000>;
> +                       regulator-max-microvolt = <2968000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l21a_2p95: ldo21 {
> +                       regulator-min-microvolt = <2960000>;
> +                       regulator-max-microvolt = <2968000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l24a_3p075: ldo24 {
> +                       regulator-min-microvolt = <3088000>;
> +                       regulator-max-microvolt = <3088000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l25a_3p3: ldo25 {
> +                       regulator-min-microvolt = <3300000>;
> +                       regulator-max-microvolt = <3312000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l26a_1p2: ldo26 {
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_lvs1a_1p8: lvs1 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-always-on;
> +               };
> +
> +               vreg_lvs2a_1p8: lvs2 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-always-on;
> +               };
> +       };
> +
> +       regulators-1 {
> +               compatible = "qcom,pmi8998-rpmh-regulators";
> +               qcom,pmic-id = "b";
> +
> +               vdd-bob-supply = <&vph_pwr>;
> +
> +               vreg_bob: bob {
> +                       regulator-min-microvolt = <3312000>;
> +                       regulator-max-microvolt = <3600000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> +                       regulator-allow-bypass;
> +               };
> +       };
> +};
> +
> +&camss {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l26a_1p2>;
> +};
> +
> +&cdsp_pas {
> +       status = "okay";
> +       firmware-name = "qcom/sdm845/cdsp.mbn";
> +};
> +
> +&gcc {
> +       protected-clocks = <GCC_QSPI_CORE_CLK>,
> +                          <GCC_QSPI_CORE_CLK_SRC>,
> +                          <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> +                          <GCC_LPASS_Q6_AXI_CLK>,
> +                          <GCC_LPASS_SWAY_CLK>;
> +};
> +
> +&gmu {
> +       status = "okay";
> +};
> +
> +&gpi_dma0 {
> +       status = "okay";
> +};
> +
> +&gpi_dma1 {
> +       status = "okay";
> +};
> +
> +&gpu {
> +       status = "okay";
> +       zap-shader {
> +               memory-region = <&gpu_mem>;
> +               firmware-name = "qcom/sdm845/a630_zap.mbn";
> +       };
> +};
> +
> +&i2c10 {
> +       status = "okay";
> +       clock-frequency = <400000>;
> +
> +       lt9611_codec: hdmi-bridge at 3b {
> +               compatible = "lontium,lt9611";
> +               reg = <0x3b>;
> +               #sound-dai-cells = <1>;
> +
> +               interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
> +
> +               reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
> +
> +               vdd-supply = <&lt9611_1v8>;
> +               vcc-supply = <&lt9611_3v3>;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port at 0 {
> +                               reg = <0>;
> +
> +                               lt9611_a: endpoint {
> +                                       remote-endpoint = <&mdss_dsi0_out>;
> +                               };
> +                       };
> +
> +                       port at 1 {
> +                               reg = <1>;
> +
> +                               lt9611_b: endpoint {
> +                                       remote-endpoint = <&mdss_dsi1_out>;
> +                               };
> +                       };
> +
> +                       port at 2 {
> +                               reg = <2>;
> +
> +                               lt9611_out: endpoint {
> +                                       remote-endpoint = <&hdmi_con>;
> +                               };
> +                       };
> +               };
> +       };
> +};
> +
> +&i2c11 {
> +       /* On Low speed expansion */
> +       clock-frequency = <100000>;
> +       status = "okay";
> +};
> +
> +&i2c14 {
> +       /* On Low speed expansion */
> +       clock-frequency = <100000>;
> +       status = "okay";
> +};
> +
> +&mdss {
> +       memory-region = <&cont_splash_mem>;
> +       status = "okay";
> +};
> +
> +&mdss_dsi0 {
> +       status = "okay";
> +       vdda-supply = <&vreg_l26a_1p2>;
> +
> +       qcom,dual-dsi-mode;
> +       qcom,master-dsi;
> +
> +       ports {
> +               port at 1 {
> +                       endpoint {
> +                               remote-endpoint = <&lt9611_a>;
> +                               data-lanes = <0 1 2 3>;
> +                       };
> +               };
> +       };
> +};
> +
> +&mdss_dsi0_phy {
> +       status = "okay";
> +       vdds-supply = <&vreg_l1a_0p875>;
> +};
> +
> +&mdss_dsi1 {
> +       vdda-supply = <&vreg_l26a_1p2>;
> +
> +       qcom,dual-dsi-mode;
> +
> +       /* DSI1 is slave, so use DSI0 clocks */
> +       assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
> +
> +       status = "okay";
> +
> +       ports {
> +               port at 1 {
> +                       endpoint {
> +                               remote-endpoint = <&lt9611_b>;
> +                               data-lanes = <0 1 2 3>;
> +                       };
> +               };
> +       };
> +};
> +
> +&mdss_dsi1_phy {
> +       vdds-supply = <&vreg_l1a_0p875>;
> +       status = "okay";
> +};
> +
> +&mss_pil {
> +       status = "okay";
> +       firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
> +};
> +
> +&pcie0 {
> +       status = "okay";
> +       perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
> +       enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> +
> +       vddpe-3v3-supply = <&pcie0_3p3v_dual>;
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pcie0_default_state>;
> +};
> +
> +&pcie0_phy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l26a_1p2>;
> +};
> +
> +&pcie1 {
> +       status = "okay";
> +       perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pcie1_default_state>;
> +};
> +
> +&pcie1_phy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l26a_1p2>;
> +};
> +
> +&pm8998_gpios {
> +       gpio-line-names =
> +               "NC",
> +               "NC",
> +               "WLAN_SW_CTRL",
> +               "NC",
> +               "PM_GPIO5_BLUE_BT_LED",
> +               "VOL_UP_N",
> +               "NC",
> +               "ADC_IN1",
> +               "PM_GPIO9_YEL_WIFI_LED",
> +               "CAM0_AVDD_EN",
> +               "NC",
> +               "CAM0_DVDD_EN",
> +               "PM_GPIO13_GREEN_U4_LED",
> +               "DIV_CLK2",
> +               "NC",
> +               "NC",
> +               "NC",
> +               "SMB_STAT",
> +               "NC",
> +               "NC",
> +               "ADC_IN2",
> +               "OPTION1",
> +               "WCSS_PWR_REQ",
> +               "PM845_GPIO24",
> +               "OPTION2",
> +               "PM845_SLB";
> +
> +       cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
> +               pins = "gpio12";
> +               function = "normal";
> +
> +               bias-pull-up;
> +               drive-push-pull;
> +               qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
> +       };
> +
> +       cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
> +               pins = "gpio10";
> +               function = "normal";
> +
> +               bias-pull-up;
> +               drive-push-pull;
> +               qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
> +       };
> +
> +       vol_up_pin_a: vol-up-active-state {
> +               pins = "gpio6";
> +               function = "normal";
> +               input-enable;
> +               bias-pull-up;
> +               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
> +       };
> +};
> +
> +&pm8998_resin {
> +       linux,code = <KEY_VOLUMEDOWN>;
> +       status = "okay";
> +};
> +
> +&pmi8998_lpg {
> +       status = "okay";
> +
> +       qcom,power-source = <1>;
> +
> +       led at 3 {
> +               reg = <3>;
> +               color = <LED_COLOR_ID_GREEN>;
> +               function = LED_FUNCTION_HEARTBEAT;
> +               function-enumerator = <3>;
> +
> +               linux,default-trigger = "heartbeat";
> +               default-state = "on";
> +       };
> +
> +       led at 4 {
> +               reg = <4>;
> +               color = <LED_COLOR_ID_GREEN>;
> +               function = LED_FUNCTION_INDICATOR;
> +               function-enumerator = <2>;
> +       };
> +
> +       led at 5 {
> +               reg = <5>;
> +               color = <LED_COLOR_ID_GREEN>;
> +               function = LED_FUNCTION_INDICATOR;
> +               function-enumerator = <1>;
> +       };
> +};
> +
> +/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
> +&q6afedai {
> +       dai at 22 {
> +               reg = <QUATERNARY_MI2S_RX>;
> +               qcom,sd-lines = <0 1 2 3>;
> +       };
> +};
> +
> +&q6asmdai {
> +       dai at 0 {
> +               reg = <0>;
> +       };
> +
> +       dai at 1 {
> +               reg = <1>;
> +       };
> +
> +       dai at 2 {
> +               reg = <2>;
> +       };
> +
> +       dai at 3 {
> +               reg = <3>;
> +               direction = <2>;
> +               is-compress-dai;
> +       };
> +};
> +
> +&qupv3_id_0 {
> +       status = "okay";
> +};
> +
> +&qupv3_id_1 {
> +       status = "okay";
> +};
> +
> +&sdhc_2 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
> +
> +       vmmc-supply = <&vreg_l21a_2p95>;
> +       vqmmc-supply = <&vreg_l13a_2p95>;
> +
> +       bus-width = <4>;
> +       cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> +};
> +
> +&sound {
> +       compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
> +       pinctrl-0 = <&quat_mi2s_active
> +                        &quat_mi2s_sd0_active
> +                        &quat_mi2s_sd1_active
> +                        &quat_mi2s_sd2_active
> +                        &quat_mi2s_sd3_active>;
> +       pinctrl-names = "default";
> +       model = "DB845c";
> +       audio-routing =
> +               "RX_BIAS", "MCLK",
> +               "AMIC1", "MIC BIAS1",
> +               "AMIC2", "MIC BIAS2",
> +               "DMIC0", "MIC BIAS1",
> +               "DMIC1", "MIC BIAS1",
> +               "DMIC2", "MIC BIAS3",
> +               "DMIC3", "MIC BIAS3",
> +               "SpkrLeft IN", "SPK1 OUT",
> +               "SpkrRight IN", "SPK2 OUT",
> +               "MM_DL1",  "MultiMedia1 Playback",
> +               "MM_DL2",  "MultiMedia2 Playback",
> +               "MM_DL4",  "MultiMedia4 Playback",
> +               "MultiMedia3 Capture", "MM_UL3";
> +
> +       mm1-dai-link {
> +               link-name = "MultiMedia1";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
> +               };
> +       };
> +
> +       mm2-dai-link {
> +               link-name = "MultiMedia2";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
> +               };
> +       };
> +
> +       mm3-dai-link {
> +               link-name = "MultiMedia3";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
> +               };
> +       };
> +
> +       mm4-dai-link {
> +               link-name = "MultiMedia4";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
> +               };
> +       };
> +
> +       hdmi-dai-link {
> +               link-name = "HDMI Playback";
> +               cpu {
> +                       sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
> +               };
> +
> +               platform {
> +                       sound-dai = <&q6routing>;
> +               };
> +
> +               codec {
> +                       sound-dai = <&lt9611_codec 0>;
> +               };
> +       };
> +
> +       slim-dai-link {
> +               link-name = "SLIM Playback";
> +               cpu {
> +                       sound-dai = <&q6afedai SLIMBUS_0_RX>;
> +               };
> +
> +               platform {
> +                       sound-dai = <&q6routing>;
> +               };
> +
> +               codec {
> +                       sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
> +               };
> +       };
> +
> +       slimcap-dai-link {
> +               link-name = "SLIM Capture";
> +               cpu {
> +                       sound-dai = <&q6afedai SLIMBUS_0_TX>;
> +               };
> +
> +               platform {
> +                       sound-dai = <&q6routing>;
> +               };
> +
> +               codec {
> +                       sound-dai = <&wcd9340 1>;
> +               };
> +       };
> +};
> +
> +&spi0 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&qup_spi0_default>;
> +       cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
> +
> +       can at 0 {
> +               compatible = "microchip,mcp2517fd";
> +               reg = <0>;
> +               clocks = <&clk40M>;
> +               interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> +               spi-max-frequency = <10000000>;
> +               vdd-supply = <&vdc_5v>;
> +               xceiver-supply = <&vdc_5v>;
> +       };
> +};
> +
> +&spi2 {
> +       /* On Low speed expansion */
> +       status = "okay";
> +};
> +
> +&tlmm {
> +       cam0_default: cam0-default-state {
> +               rst-pins {
> +                       pins = "gpio9";
> +                       function = "gpio";
> +
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +
> +               mclk0-pins {
> +                       pins = "gpio13";
> +                       function = "cam_mclk";
> +
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +       };
> +
> +       cam3_default: cam3-default-state {
> +               rst-pins {
> +                       function = "gpio";
> +                       pins = "gpio21";
> +
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +
> +               mclk3-pins {
> +                       function = "cam_mclk";
> +                       pins = "gpio16";
> +
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +       };
> +
> +       dsi_sw_sel: dsi-sw-sel-state {
> +               pins = "gpio120";
> +               function = "gpio";
> +
> +               drive-strength = <2>;
> +               bias-disable;
> +               output-high;
> +       };
> +
> +       lt9611_irq_pin: lt9611-irq-state {
> +               pins = "gpio84";
> +               function = "gpio";
> +               bias-disable;
> +       };
> +
> +       pcie0_default_state: pcie0-default-state {
> +               clkreq-pins {
> +                       pins = "gpio36";
> +                       function = "pci_e0";
> +                       bias-pull-up;
> +               };
> +
> +               reset-n-pins {
> +                       pins = "gpio35";
> +                       function = "gpio";
> +
> +                       drive-strength = <2>;
> +                       output-low;
> +                       bias-pull-down;
> +               };
> +
> +               wake-n-pins {
> +                       pins = "gpio37";
> +                       function = "gpio";
> +
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +       };
> +
> +       pcie0_pwren_state: pcie0-pwren-state {
> +               pins = "gpio90";
> +               function = "gpio";
> +
> +               drive-strength = <2>;
> +               bias-disable;
> +       };
> +
> +       pcie1_default_state: pcie1-default-state {
> +               perst-n-pins {
> +                       pins = "gpio102";
> +                       function = "gpio";
> +
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +
> +               clkreq-pins {
> +                       pins = "gpio103";
> +                       function = "pci_e1";
> +                       bias-pull-up;
> +               };
> +
> +               wake-n-pins {
> +                       pins = "gpio11";
> +                       function = "gpio";
> +
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +
> +               reset-n-pins {
> +                       pins = "gpio75";
> +                       function = "gpio";
> +
> +                       drive-strength = <16>;
> +                       bias-pull-up;
> +                       output-high;
> +               };
> +       };
> +
> +       sdc2_default_state: sdc2-default-state {
> +               clk-pins {
> +                       pins = "sdc2_clk";
> +                       bias-disable;
> +
> +                       /*
> +                        * It seems that mmc_test reports errors if drive
> +                        * strength is not 16 on clk, cmd, and data pins.
> +                        */
> +                       drive-strength = <16>;
> +               };
> +
> +               cmd-pins {
> +                       pins = "sdc2_cmd";
> +                       bias-pull-up;
> +                       drive-strength = <10>;
> +               };
> +
> +               data-pins {
> +                       pins = "sdc2_data";
> +                       bias-pull-up;
> +                       drive-strength = <10>;
> +               };
> +       };
> +
> +       sdc2_card_det_n: sd-card-det-n-state {
> +               pins = "gpio126";
> +               function = "gpio";
> +               bias-pull-up;
> +       };
> +};
> +
> +&uart3 {
> +       label = "LS-UART0";
> +       pinctrl-0 = <&qup_uart3_4pin>;
> +
> +       status = "disabled";
> +};
> +
> +&uart6 {
> +       status = "okay";
> +
> +       pinctrl-0 = <&qup_uart6_4pin>;
> +
> +       bluetooth {
> +               compatible = "qcom,wcn3990-bt";
> +
> +               vddio-supply = <&vreg_s4a_1p8>;
> +               vddxo-supply = <&vreg_l7a_1p8>;
> +               vddrf-supply = <&vreg_l17a_1p3>;
> +               vddch0-supply = <&vreg_l25a_3p3>;
> +               max-speed = <3200000>;
> +       };
> +};
> +
> +&uart9 {
> +       label = "LS-UART1";
> +       status = "okay";
> +};
> +
> +&usb_1 {
> +       status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +       dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +       status = "okay";
> +
> +       vdd-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l12a_1p8>;
> +       vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> +
> +       qcom,imp-res-offset-value = <8>;
> +       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> +       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> +       qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +};
> +
> +&usb_1_qmpphy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l26a_1p2>;
> +       vdda-pll-supply = <&vreg_l1a_0p875>;
> +};
> +
> +&usb_2 {
> +       status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> +       dr_mode = "host";
> +};
> +
> +&usb_2_hsphy {
> +       status = "okay";
> +
> +       vdd-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l12a_1p8>;
> +       vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> +
> +       qcom,imp-res-offset-value = <8>;
> +       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
> +};
> +
> +&usb_2_qmpphy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l26a_1p2>;
> +       vdda-pll-supply = <&vreg_l1a_0p875>;
> +};
> +
> +&ufs_mem_hc {
> +       status = "okay";
> +
> +       reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> +
> +       vcc-supply = <&vreg_l20a_2p95>;
> +       vcc-max-microamp = <800000>;
> +};
> +
> +&ufs_mem_phy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l26a_1p2>;
> +};
> +
> +&venus {
> +       status = "okay";
> +};
> +
> +&wcd9340 {
> +       reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
> +       vdd-buck-supply = <&vreg_s4a_1p8>;
> +       vdd-buck-sido-supply = <&vreg_s4a_1p8>;
> +       vdd-tx-supply = <&vreg_s4a_1p8>;
> +       vdd-rx-supply = <&vreg_s4a_1p8>;
> +       vdd-io-supply = <&vreg_s4a_1p8>;
> +
> +       swm: swm at c85 {
> +               left_spkr: speaker at 0,1 {
> +                       compatible = "sdw10217201000";
> +                       reg = <0 1>;
> +                       powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
> +                       #thermal-sensor-cells = <0>;
> +                       sound-name-prefix = "SpkrLeft";
> +                       #sound-dai-cells = <0>;
> +               };
> +
> +               right_spkr: speaker at 0,2 {
> +                       compatible = "sdw10217201000";
> +                       powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
> +                       reg = <0 2>;
> +                       #thermal-sensor-cells = <0>;
> +                       sound-name-prefix = "SpkrRight";
> +                       #sound-dai-cells = <0>;
> +               };
> +       };
> +};
> +
> +&wifi {
> +       status = "okay";
> +
> +       vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> +       vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> +       vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> +       vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +
> +       qcom,snoc-host-cap-8bit-quirk;
> +       qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
> +};
> +
> +/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +&qup_spi2_default {
> +       drive-strength = <16>;
> +};
> +
> +&qup_i2c10_default {
> +       drive-strength = <2>;
> +       bias-disable;
> +};
> +
> +&qup_uart9_rx {
> +       drive-strength = <2>;
> +       bias-pull-up;
> +};
> +
> +&qup_uart9_tx {
> +       drive-strength = <2>;
> +       bias-disable;
> +};
> +
> +/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +&qup_spi0_default {
> +       drive-strength = <6>;
> +       bias-disable;
> +};
> diff --git a/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi b/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi
> new file mode 100644
> index 000000000000..c78bd6e92406
> --- /dev/null
> +++ b/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/ {
> +       chosen {
> +               stdout-path = "serial0:921600n8";
> +       };
> +};
> +
> +&tlmm {
> +       muic-i2c-n {
> +               pins = "gpio33", "gpio34";
> +               drive-strength = <0x2>;
> +               function = "gpio";
> +               bias-disable;
> +       };
> +};
> diff --git a/arch/arm/dts/sdm845-samsung-starqltechn.dts b/arch/arm/dts/sdm845-samsung-starqltechn.dts
> new file mode 100644
> index 000000000000..d37a433130b9
> --- /dev/null
> +++ b/arch/arm/dts/sdm845-samsung-starqltechn.dts
> @@ -0,0 +1,460 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sdm845.dtsi"
> +
> +/ {
> +       chassis-type = "handset";
> +       model = "Samsung Galaxy S9 SM-G9600";
> +       compatible = "samsung,starqltechn", "qcom,sdm845";
> +
> +       chosen {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges;
> +               framebuffer: framebuffer at 9d400000 {
> +                       compatible = "simple-framebuffer";
> +                       reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
> +                       width = <1440>;
> +                       height = <2960>;
> +                       stride = <(1440 * 4)>;
> +                       format = "a8r8g8b8";
> +               };
> +       };
> +
> +       vph_pwr: vph-pwr-regulator {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vph_pwr";
> +               regulator-min-microvolt = <3700000>;
> +               regulator-max-microvolt = <3700000>;
> +       };
> +
> +       /*
> +        * Apparently RPMh does not provide support for PM8998 S4 because it
> +        * is always-on; model it as a fixed regulator.
> +        */
> +       vreg_s4a_1p8: pm8998-smps4 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vreg_s4a_1p8";
> +
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +
> +               regulator-always-on;
> +               regulator-boot-on;
> +
> +               vin-supply = <&vph_pwr>;
> +       };
> +
> +       reserved-memory {
> +               memory at 9d400000 {
> +                       reg = <0x0 0x9d400000 0x0 0x02400000>;
> +                       no-map;
> +               };
> +
> +               memory at a1300000 {
> +                       compatible = "ramoops";
> +                       reg = <0x0 0xa1300000 0x0 0x100000>;
> +                       record-size = <0x40000>;
> +                       console-size = <0x40000>;
> +                       ftrace-size = <0x40000>;
> +                       pmsg-size = <0x40000>;
> +               };
> +       };
> +};
> +
> +
> +&apps_rsc {
> +       regulators-0 {
> +               compatible = "qcom,pm8998-rpmh-regulators";
> +               qcom,pmic-id = "a";
> +
> +               vdd-s1-supply = <&vph_pwr>;
> +               vdd-s2-supply = <&vph_pwr>;
> +               vdd-s3-supply = <&vph_pwr>;
> +               vdd-s4-supply = <&vph_pwr>;
> +               vdd-s5-supply = <&vph_pwr>;
> +               vdd-s6-supply = <&vph_pwr>;
> +               vdd-s7-supply = <&vph_pwr>;
> +               vdd-s8-supply = <&vph_pwr>;
> +               vdd-s9-supply = <&vph_pwr>;
> +               vdd-s10-supply = <&vph_pwr>;
> +               vdd-s11-supply = <&vph_pwr>;
> +               vdd-s12-supply = <&vph_pwr>;
> +               vdd-s13-supply = <&vph_pwr>;
> +               vdd-l1-l27-supply = <&vreg_s7a_1p025>;
> +               vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
> +               vdd-l3-l11-supply = <&vreg_s7a_1p025>;
> +               vdd-l4-l5-supply = <&vreg_s7a_1p025>;
> +               vdd-l6-supply = <&vph_pwr>;
> +               vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> +               vdd-l26-supply = <&vreg_s3a_1p35>;
> +               vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
> +
> +               vreg_s2a_1p125: smps2 {
> +                       regulator-min-microvolt = <1100000>;
> +                       regulator-max-microvolt = <1100000>;
> +               };
> +
> +               vreg_s3a_1p35: smps3 {
> +                       regulator-min-microvolt = <1352000>;
> +                       regulator-max-microvolt = <1352000>;
> +               };
> +
> +               vreg_s5a_2p04: smps5 {
> +                       regulator-min-microvolt = <1904000>;
> +                       regulator-max-microvolt = <2040000>;
> +               };
> +
> +               vreg_s7a_1p025: smps7 {
> +                       regulator-min-microvolt = <900000>;
> +                       regulator-max-microvolt = <1028000>;
> +               };
> +
> +               vdd_qusb_hs0:
> +               vdda_hp_pcie_core:
> +               vdda_mipi_csi0_0p9:
> +               vdda_mipi_csi1_0p9:
> +               vdda_mipi_csi2_0p9:
> +               vdda_mipi_dsi0_pll:
> +               vdda_mipi_dsi1_pll:
> +               vdda_qlink_lv:
> +               vdda_qlink_lv_ck:
> +               vdda_qrefs_0p875:
> +               vdda_pcie_core:
> +               vdda_pll_cc_ebi01:
> +               vdda_pll_cc_ebi23:
> +               vdda_sp_sensor:
> +               vdda_ufs1_core:
> +               vdda_ufs2_core:
> +               vdda_usb1_ss_core:
> +               vdda_usb2_ss_core:
> +               vreg_l1a_0p875: ldo1 {
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vddpx_10:
> +               vreg_l2a_1p2: ldo2 {
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +                       regulator-always-on;
> +               };
> +
> +               vreg_l3a_1p0: ldo3 {
> +                       regulator-min-microvolt = <1000000>;
> +                       regulator-max-microvolt = <1000000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vdd_wcss_cx:
> +               vdd_wcss_mx:
> +               vdda_wcss_pll:
> +               vreg_l5a_0p8: ldo5 {
> +                       regulator-min-microvolt = <800000>;
> +                       regulator-max-microvolt = <800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vddpx_13:
> +               vreg_l6a_1p8: ldo6 {
> +                       regulator-min-microvolt = <1856000>;
> +                       regulator-max-microvolt = <1856000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l7a_1p8: ldo7 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l8a_1p2: ldo8 {
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1248000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l9a_1p8: ldo9 {
> +                       regulator-min-microvolt = <1704000>;
> +                       regulator-max-microvolt = <2928000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l10a_1p8: ldo10 {
> +                       regulator-min-microvolt = <1704000>;
> +                       regulator-max-microvolt = <2928000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l11a_1p0: ldo11 {
> +                       regulator-min-microvolt = <1000000>;
> +                       regulator-max-microvolt = <1048000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vdd_qfprom:
> +               vdd_qfprom_sp:
> +               vdda_apc1_cs_1p8:
> +               vdda_gfx_cs_1p8:
> +               vdda_qrefs_1p8:
> +               vdda_qusb_hs0_1p8:
> +               vddpx_11:
> +               vreg_l12a_1p8: ldo12 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vddpx_2:
> +               vreg_l13a_2p95: ldo13 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l14a_1p88: ldo14 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l15a_1p8: ldo15 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l16a_2p7: ldo16 {
> +                       regulator-min-microvolt = <2704000>;
> +                       regulator-max-microvolt = <2704000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l17a_1p3: ldo17 {
> +                       regulator-min-microvolt = <1304000>;
> +                       regulator-max-microvolt = <1304000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l18a_2p7: ldo18 {
> +                       regulator-min-microvolt = <2704000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l19a_3p0: ldo19 {
> +                       regulator-min-microvolt = <2856000>;
> +                       regulator-max-microvolt = <3104000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l20a_2p95: ldo20 {
> +                       regulator-min-microvolt = <2704000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l21a_2p95: ldo21 {
> +                       regulator-min-microvolt = <2704000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l22a_2p85: ldo22 {
> +                       regulator-min-microvolt = <2864000>;
> +                       regulator-max-microvolt = <3312000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l23a_3p3: ldo23 {
> +                       regulator-min-microvolt = <3000000>;
> +                       regulator-max-microvolt = <3312000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vdda_qusb_hs0_3p1:
> +               vreg_l24a_3p075: ldo24 {
> +                       regulator-min-microvolt = <3088000>;
> +                       regulator-max-microvolt = <3088000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l25a_3p3: ldo25 {
> +                       regulator-min-microvolt = <3300000>;
> +                       regulator-max-microvolt = <3312000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vdda_hp_pcie_1p2:
> +               vdda_hv_ebi0:
> +               vdda_hv_ebi1:
> +               vdda_hv_ebi2:
> +               vdda_hv_ebi3:
> +               vdda_mipi_csi_1p25:
> +               vdda_mipi_dsi0_1p2:
> +               vdda_mipi_dsi1_1p2:
> +               vdda_pcie_1p2:
> +               vdda_ufs1_1p2:
> +               vdda_ufs2_1p2:
> +               vdda_usb1_ss_1p2:
> +               vdda_usb2_ss_1p2:
> +               vreg_l26a_1p2: ldo26 {
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l28a_3p0: ldo28 {
> +                       regulator-min-microvolt = <2856000>;
> +                       regulator-max-microvolt = <3008000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_lvs1a_1p8: lvs1 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +               };
> +
> +               vreg_lvs2a_1p8: lvs2 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +               };
> +       };
> +
> +       regulators-1 {
> +               compatible = "qcom,pm8005-rpmh-regulators";
> +               qcom,pmic-id = "c";
> +
> +               vdd-s1-supply = <&vph_pwr>;
> +               vdd-s2-supply = <&vph_pwr>;
> +               vdd-s3-supply = <&vph_pwr>;
> +               vdd-s4-supply = <&vph_pwr>;
> +
> +               vreg_s3c_0p6: smps3 {
> +                       regulator-min-microvolt = <600000>;
> +                       regulator-max-microvolt = <600000>;
> +               };
> +       };
> +};
> +
> +&gcc {
> +       protected-clocks = <GCC_QSPI_CORE_CLK>,
> +                               <GCC_QSPI_CORE_CLK_SRC>,
> +                               <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> +                               <GCC_LPASS_Q6_AXI_CLK>,
> +                               <GCC_LPASS_SWAY_CLK>;
> +};
> +
> +&i2c10 {
> +       clock-frequency = <400000>;
> +       status = "okay";
> +};
> +
> +&qupv3_id_1 {
> +       status = "okay";
> +};
> +
> +&uart9 {
> +       status = "okay";
> +};
> +
> +&ufs_mem_hc {
> +       reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> +       vcc-supply = <&vreg_l20a_2p95>;
> +       vcc-max-microamp = <600000>;
> +       status = "okay";
> +};
> +
> +&ufs_mem_phy {
> +       vdda-phy-supply = <&vdda_ufs1_core>;
> +       vdda-pll-supply = <&vdda_ufs1_1p2>;
> +       status = "okay";
> +};
> +
> +&sdhc_2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
> +       cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> +       vmmc-supply = <&vreg_l21a_2p95>;
> +       vqmmc-supply = <&vddpx_2>;
> +       status = "okay";
> +};
> +
> +&usb_1 {
> +       status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +       /* Until we have Type C hooked up we'll force this as peripheral. */
> +       dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +       vdd-supply = <&vdda_usb1_ss_core>;
> +       vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
> +       vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
> +
> +       qcom,imp-res-offset-value = <8>;
> +       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> +       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> +       qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +       status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> +       vdda-phy-supply = <&vdda_usb1_ss_1p2>;
> +       vdda-pll-supply = <&vdda_usb1_ss_core>;
> +       status = "okay";
> +};
> +
> +&wifi {
> +       vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> +       vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> +       vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> +       vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +       status = "okay";
> +};
> +
> +&tlmm {
> +       gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
> +
> +       sdc2_clk_state: sdc2-clk-state {
> +               pins = "sdc2_clk";
> +               bias-disable;
> +
> +               /*
> +                * It seems that mmc_test reports errors if drive
> +                * strength is not 16 on clk, cmd, and data pins.
> +                */
> +               drive-strength = <16>;
> +       };
> +
> +       sdc2_cmd_state: sdc2-cmd-state {
> +               pins = "sdc2_cmd";
> +               bias-pull-up;
> +               drive-strength = <16>;
> +       };
> +
> +       sdc2_data_state: sdc2-data-state {
> +               pins = "sdc2_data";
> +               bias-pull-up;
> +               drive-strength = <16>;
> +       };
> +
> +       sd_card_det_n_state: sd-card-det-n-state {
> +               pins = "gpio126";
> +               function = "gpio";
> +               bias-pull-up;
> +       };
> +};
> diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
> index 96c9749a52c0..bf5e6eb9d313 100644
> --- a/arch/arm/dts/sdm845.dtsi
> +++ b/arch/arm/dts/sdm845.dtsi
> @@ -1,119 +1,5752 @@
> -// SPDX-License-Identifier: GPL-2.0+
> +// SPDX-License-Identifier: GPL-2.0
>  /*
> - * Qualcomm SDM845 chip device tree source
> - *
> - * (C) Copyright 2021 Dzmitry Sankouski <dsankouski at gmail.com>
> + * SDM845 SoC device tree source
>   *
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
>   */
>
> -/dts-v1/;
> -
> +#include <dt-bindings/clock/qcom,camcc-sdm845.h>
> +#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
>  #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> -#include "skeleton64.dtsi"
> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
> +#include <dt-bindings/clock/qcom,lpass-sdm845.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,videocc-sdm845.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interconnect/qcom,osm-l3.h>
> +#include <dt-bindings/interconnect/qcom,sdm845.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
> +#include <dt-bindings/phy/phy-qcom-qusb2.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +#include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +#include <dt-bindings/soc/qcom,apr.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +#include <dt-bindings/thermal/thermal.h>
>
>  / {
> -       soc: soc {
> -               #address-cells = <1>;
> -               #size-cells = <1>;
> -               ranges = <0 0 0 0xffffffff>;
> +       interrupt-parent = <&intc>;
> +
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       aliases {
> +               i2c0 = &i2c0;
> +               i2c1 = &i2c1;
> +               i2c2 = &i2c2;
> +               i2c3 = &i2c3;
> +               i2c4 = &i2c4;
> +               i2c5 = &i2c5;
> +               i2c6 = &i2c6;
> +               i2c7 = &i2c7;
> +               i2c8 = &i2c8;
> +               i2c9 = &i2c9;
> +               i2c10 = &i2c10;
> +               i2c11 = &i2c11;
> +               i2c12 = &i2c12;
> +               i2c13 = &i2c13;
> +               i2c14 = &i2c14;
> +               i2c15 = &i2c15;
> +               spi0 = &spi0;
> +               spi1 = &spi1;
> +               spi2 = &spi2;
> +               spi3 = &spi3;
> +               spi4 = &spi4;
> +               spi5 = &spi5;
> +               spi6 = &spi6;
> +               spi7 = &spi7;
> +               spi8 = &spi8;
> +               spi9 = &spi9;
> +               spi10 = &spi10;
> +               spi11 = &spi11;
> +               spi12 = &spi12;
> +               spi13 = &spi13;
> +               spi14 = &spi14;
> +               spi15 = &spi15;
> +       };
> +
> +       chosen { };
> +
> +       clocks {
> +               xo_board: xo-board {
> +                       compatible = "fixed-clock";
> +                       #clock-cells = <0>;
> +                       clock-frequency = <38400000>;
> +                       clock-output-names = "xo_board";
> +               };
> +
> +               sleep_clk: sleep-clk {
> +                       compatible = "fixed-clock";
> +                       #clock-cells = <0>;
> +                       clock-frequency = <32764>;
> +               };
> +       };
> +
> +       cpus: cpus {
> +               #address-cells = <2>;
> +               #size-cells = <0>;
> +
> +               CPU0: cpu at 0 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x0>;
> +                       clocks = <&cpufreq_hw 0>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <611>;
> +                       dynamic-power-coefficient = <154>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD0>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_0>;
> +                       L2_0: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                               L3_0: l3-cache {
> +                                       compatible = "cache";
> +                                       cache-level = <3>;
> +                                       cache-unified;
> +                               };
> +                       };
> +               };
> +
> +               CPU1: cpu at 100 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x100>;
> +                       clocks = <&cpufreq_hw 0>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <611>;
> +                       dynamic-power-coefficient = <154>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD1>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_100>;
> +                       L2_100: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU2: cpu at 200 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x200>;
> +                       clocks = <&cpufreq_hw 0>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <611>;
> +                       dynamic-power-coefficient = <154>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD2>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_200>;
> +                       L2_200: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU3: cpu at 300 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x300>;
> +                       clocks = <&cpufreq_hw 0>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <611>;
> +                       dynamic-power-coefficient = <154>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
> +                       operating-points-v2 = <&cpu0_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       #cooling-cells = <2>;
> +                       power-domains = <&CPU_PD3>;
> +                       power-domain-names = "psci";
> +                       next-level-cache = <&L2_300>;
> +                       L2_300: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU4: cpu at 400 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x400>;
> +                       clocks = <&cpufreq_hw 1>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <442>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
> +                       operating-points-v2 = <&cpu4_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD4>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_400>;
> +                       L2_400: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU5: cpu at 500 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x500>;
> +                       clocks = <&cpufreq_hw 1>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <442>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
> +                       operating-points-v2 = <&cpu4_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD5>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_500>;
> +                       L2_500: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU6: cpu at 600 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x600>;
> +                       clocks = <&cpufreq_hw 1>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <442>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
> +                       operating-points-v2 = <&cpu4_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD6>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_600>;
> +                       L2_600: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               CPU7: cpu at 700 {
> +                       device_type = "cpu";
> +                       compatible = "qcom,kryo385";
> +                       reg = <0x0 0x700>;
> +                       clocks = <&cpufreq_hw 1>;
> +                       enable-method = "psci";
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <442>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
> +                       operating-points-v2 = <&cpu4_opp_table>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
> +                                       <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +                       power-domains = <&CPU_PD7>;
> +                       power-domain-names = "psci";
> +                       #cooling-cells = <2>;
> +                       next-level-cache = <&L2_700>;
> +                       L2_700: l2-cache {
> +                               compatible = "cache";
> +                               cache-level = <2>;
> +                               cache-unified;
> +                               next-level-cache = <&L3_0>;
> +                       };
> +               };
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&CPU0>;
> +                               };
> +
> +                               core1 {
> +                                       cpu = <&CPU1>;
> +                               };
> +
> +                               core2 {
> +                                       cpu = <&CPU2>;
> +                               };
> +
> +                               core3 {
> +                                       cpu = <&CPU3>;
> +                               };
> +
> +                               core4 {
> +                                       cpu = <&CPU4>;
> +                               };
> +
> +                               core5 {
> +                                       cpu = <&CPU5>;
> +                               };
> +
> +                               core6 {
> +                                       cpu = <&CPU6>;
> +                               };
> +
> +                               core7 {
> +                                       cpu = <&CPU7>;
> +                               };
> +                       };
> +               };
> +
> +               cpu_idle_states: idle-states {
> +                       entry-method = "psci";
> +
> +                       LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> +                               compatible = "arm,idle-state";
> +                               idle-state-name = "little-rail-power-collapse";
> +                               arm,psci-suspend-param = <0x40000004>;
> +                               entry-latency-us = <350>;
> +                               exit-latency-us = <461>;
> +                               min-residency-us = <1890>;
> +                               local-timer-stop;
> +                       };
> +
> +                       BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
> +                               compatible = "arm,idle-state";
> +                               idle-state-name = "big-rail-power-collapse";
> +                               arm,psci-suspend-param = <0x40000004>;
> +                               entry-latency-us = <264>;
> +                               exit-latency-us = <621>;
> +                               min-residency-us = <952>;
> +                               local-timer-stop;
> +                       };
> +               };
> +
> +               domain-idle-states {
> +                       CLUSTER_SLEEP_0: cluster-sleep-0 {
> +                               compatible = "domain-idle-state";
> +                               arm,psci-suspend-param = <0x4100c244>;
> +                               entry-latency-us = <3263>;
> +                               exit-latency-us = <6562>;
> +                               min-residency-us = <9987>;
> +                       };
> +               };
> +       };
> +
> +       firmware {
> +               scm {
> +                       compatible = "qcom,scm-sdm845", "qcom,scm";
> +               };
> +       };
> +
> +       memory at 80000000 {
> +               device_type = "memory";
> +               /* We expect the bootloader to fill in the size */
> +               reg = <0 0x80000000 0 0>;
> +       };
> +
> +       cpu0_opp_table: opp-table-cpu0 {
> +               compatible = "operating-points-v2";
> +               opp-shared;
> +
> +               cpu0_opp1: opp-300000000 {
> +                       opp-hz = /bits/ 64 <300000000>;
> +                       opp-peak-kBps = <800000 4800000>;
> +               };
> +
> +               cpu0_opp2: opp-403200000 {
> +                       opp-hz = /bits/ 64 <403200000>;
> +                       opp-peak-kBps = <800000 4800000>;
> +               };
> +
> +               cpu0_opp3: opp-480000000 {
> +                       opp-hz = /bits/ 64 <480000000>;
> +                       opp-peak-kBps = <800000 6451200>;
> +               };
> +
> +               cpu0_opp4: opp-576000000 {
> +                       opp-hz = /bits/ 64 <576000000>;
> +                       opp-peak-kBps = <800000 6451200>;
> +               };
> +
> +               cpu0_opp5: opp-652800000 {
> +                       opp-hz = /bits/ 64 <652800000>;
> +                       opp-peak-kBps = <800000 7680000>;
> +               };
> +
> +               cpu0_opp6: opp-748800000 {
> +                       opp-hz = /bits/ 64 <748800000>;
> +                       opp-peak-kBps = <1804000 9216000>;
> +               };
> +
> +               cpu0_opp7: opp-825600000 {
> +                       opp-hz = /bits/ 64 <825600000>;
> +                       opp-peak-kBps = <1804000 9216000>;
> +               };
> +
> +               cpu0_opp8: opp-902400000 {
> +                       opp-hz = /bits/ 64 <902400000>;
> +                       opp-peak-kBps = <1804000 10444800>;
> +               };
> +
> +               cpu0_opp9: opp-979200000 {
> +                       opp-hz = /bits/ 64 <979200000>;
> +                       opp-peak-kBps = <1804000 11980800>;
> +               };
> +
> +               cpu0_opp10: opp-1056000000 {
> +                       opp-hz = /bits/ 64 <1056000000>;
> +                       opp-peak-kBps = <1804000 11980800>;
> +               };
> +
> +               cpu0_opp11: opp-1132800000 {
> +                       opp-hz = /bits/ 64 <1132800000>;
> +                       opp-peak-kBps = <2188000 13516800>;
> +               };
> +
> +               cpu0_opp12: opp-1228800000 {
> +                       opp-hz = /bits/ 64 <1228800000>;
> +                       opp-peak-kBps = <2188000 15052800>;
> +               };
> +
> +               cpu0_opp13: opp-1324800000 {
> +                       opp-hz = /bits/ 64 <1324800000>;
> +                       opp-peak-kBps = <2188000 16588800>;
> +               };
> +
> +               cpu0_opp14: opp-1420800000 {
> +                       opp-hz = /bits/ 64 <1420800000>;
> +                       opp-peak-kBps = <3072000 18124800>;
> +               };
> +
> +               cpu0_opp15: opp-1516800000 {
> +                       opp-hz = /bits/ 64 <1516800000>;
> +                       opp-peak-kBps = <3072000 19353600>;
> +               };
> +
> +               cpu0_opp16: opp-1612800000 {
> +                       opp-hz = /bits/ 64 <1612800000>;
> +                       opp-peak-kBps = <4068000 19353600>;
> +               };
> +
> +               cpu0_opp17: opp-1689600000 {
> +                       opp-hz = /bits/ 64 <1689600000>;
> +                       opp-peak-kBps = <4068000 20889600>;
> +               };
> +
> +               cpu0_opp18: opp-1766400000 {
> +                       opp-hz = /bits/ 64 <1766400000>;
> +                       opp-peak-kBps = <4068000 22425600>;
> +               };
> +       };
> +
> +       cpu4_opp_table: opp-table-cpu4 {
> +               compatible = "operating-points-v2";
> +               opp-shared;
> +
> +               cpu4_opp1: opp-300000000 {
> +                       opp-hz = /bits/ 64 <300000000>;
> +                       opp-peak-kBps = <800000 4800000>;
> +               };
> +
> +               cpu4_opp2: opp-403200000 {
> +                       opp-hz = /bits/ 64 <403200000>;
> +                       opp-peak-kBps = <800000 4800000>;
> +               };
> +
> +               cpu4_opp3: opp-480000000 {
> +                       opp-hz = /bits/ 64 <480000000>;
> +                       opp-peak-kBps = <1804000 4800000>;
> +               };
> +
> +               cpu4_opp4: opp-576000000 {
> +                       opp-hz = /bits/ 64 <576000000>;
> +                       opp-peak-kBps = <1804000 4800000>;
> +               };
> +
> +               cpu4_opp5: opp-652800000 {
> +                       opp-hz = /bits/ 64 <652800000>;
> +                       opp-peak-kBps = <1804000 4800000>;
> +               };
> +
> +               cpu4_opp6: opp-748800000 {
> +                       opp-hz = /bits/ 64 <748800000>;
> +                       opp-peak-kBps = <1804000 4800000>;
> +               };
> +
> +               cpu4_opp7: opp-825600000 {
> +                       opp-hz = /bits/ 64 <825600000>;
> +                       opp-peak-kBps = <2188000 9216000>;
> +               };
> +
> +               cpu4_opp8: opp-902400000 {
> +                       opp-hz = /bits/ 64 <902400000>;
> +                       opp-peak-kBps = <2188000 9216000>;
> +               };
> +
> +               cpu4_opp9: opp-979200000 {
> +                       opp-hz = /bits/ 64 <979200000>;
> +                       opp-peak-kBps = <2188000 9216000>;
> +               };
> +
> +               cpu4_opp10: opp-1056000000 {
> +                       opp-hz = /bits/ 64 <1056000000>;
> +                       opp-peak-kBps = <3072000 9216000>;
> +               };
> +
> +               cpu4_opp11: opp-1132800000 {
> +                       opp-hz = /bits/ 64 <1132800000>;
> +                       opp-peak-kBps = <3072000 11980800>;
> +               };
> +
> +               cpu4_opp12: opp-1209600000 {
> +                       opp-hz = /bits/ 64 <1209600000>;
> +                       opp-peak-kBps = <4068000 11980800>;
> +               };
> +
> +               cpu4_opp13: opp-1286400000 {
> +                       opp-hz = /bits/ 64 <1286400000>;
> +                       opp-peak-kBps = <4068000 11980800>;
> +               };
> +
> +               cpu4_opp14: opp-1363200000 {
> +                       opp-hz = /bits/ 64 <1363200000>;
> +                       opp-peak-kBps = <4068000 15052800>;
> +               };
> +
> +               cpu4_opp15: opp-1459200000 {
> +                       opp-hz = /bits/ 64 <1459200000>;
> +                       opp-peak-kBps = <4068000 15052800>;
> +               };
> +
> +               cpu4_opp16: opp-1536000000 {
> +                       opp-hz = /bits/ 64 <1536000000>;
> +                       opp-peak-kBps = <5412000 15052800>;
> +               };
> +
> +               cpu4_opp17: opp-1612800000 {
> +                       opp-hz = /bits/ 64 <1612800000>;
> +                       opp-peak-kBps = <5412000 15052800>;
> +               };
> +
> +               cpu4_opp18: opp-1689600000 {
> +                       opp-hz = /bits/ 64 <1689600000>;
> +                       opp-peak-kBps = <5412000 19353600>;
> +               };
> +
> +               cpu4_opp19: opp-1766400000 {
> +                       opp-hz = /bits/ 64 <1766400000>;
> +                       opp-peak-kBps = <6220000 19353600>;
> +               };
> +
> +               cpu4_opp20: opp-1843200000 {
> +                       opp-hz = /bits/ 64 <1843200000>;
> +                       opp-peak-kBps = <6220000 19353600>;
> +               };
> +
> +               cpu4_opp21: opp-1920000000 {
> +                       opp-hz = /bits/ 64 <1920000000>;
> +                       opp-peak-kBps = <7216000 19353600>;
> +               };
> +
> +               cpu4_opp22: opp-1996800000 {
> +                       opp-hz = /bits/ 64 <1996800000>;
> +                       opp-peak-kBps = <7216000 20889600>;
> +               };
> +
> +               cpu4_opp23: opp-2092800000 {
> +                       opp-hz = /bits/ 64 <2092800000>;
> +                       opp-peak-kBps = <7216000 20889600>;
> +               };
> +
> +               cpu4_opp24: opp-2169600000 {
> +                       opp-hz = /bits/ 64 <2169600000>;
> +                       opp-peak-kBps = <7216000 20889600>;
> +               };
> +
> +               cpu4_opp25: opp-2246400000 {
> +                       opp-hz = /bits/ 64 <2246400000>;
> +                       opp-peak-kBps = <7216000 20889600>;
> +               };
> +
> +               cpu4_opp26: opp-2323200000 {
> +                       opp-hz = /bits/ 64 <2323200000>;
> +                       opp-peak-kBps = <7216000 20889600>;
> +               };
> +
> +               cpu4_opp27: opp-2400000000 {
> +                       opp-hz = /bits/ 64 <2400000000>;
> +                       opp-peak-kBps = <7216000 22425600>;
> +               };
> +
> +               cpu4_opp28: opp-2476800000 {
> +                       opp-hz = /bits/ 64 <2476800000>;
> +                       opp-peak-kBps = <7216000 22425600>;
> +               };
> +
> +               cpu4_opp29: opp-2553600000 {
> +                       opp-hz = /bits/ 64 <2553600000>;
> +                       opp-peak-kBps = <7216000 22425600>;
> +               };
> +
> +               cpu4_opp30: opp-2649600000 {
> +                       opp-hz = /bits/ 64 <2649600000>;
> +                       opp-peak-kBps = <7216000 22425600>;
> +               };
> +
> +               cpu4_opp31: opp-2745600000 {
> +                       opp-hz = /bits/ 64 <2745600000>;
> +                       opp-peak-kBps = <7216000 25497600>;
> +               };
> +
> +               cpu4_opp32: opp-2803200000 {
> +                       opp-hz = /bits/ 64 <2803200000>;
> +                       opp-peak-kBps = <7216000 25497600>;
> +               };
> +       };
> +
> +       dsi_opp_table: opp-table-dsi {
> +               compatible = "operating-points-v2";
> +
> +               opp-19200000 {
> +                       opp-hz = /bits/ 64 <19200000>;
> +                       required-opps = <&rpmhpd_opp_min_svs>;
> +               };
> +
> +               opp-180000000 {
> +                       opp-hz = /bits/ 64 <180000000>;
> +                       required-opps = <&rpmhpd_opp_low_svs>;
> +               };
> +
> +               opp-275000000 {
> +                       opp-hz = /bits/ 64 <275000000>;
> +                       required-opps = <&rpmhpd_opp_svs>;
> +               };
> +
> +               opp-328580000 {
> +                       opp-hz = /bits/ 64 <328580000>;
> +                       required-opps = <&rpmhpd_opp_svs_l1>;
> +               };
> +
> +               opp-358000000 {
> +                       opp-hz = /bits/ 64 <358000000>;
> +                       required-opps = <&rpmhpd_opp_nom>;
> +               };
> +       };
> +
> +       qspi_opp_table: opp-table-qspi {
> +               compatible = "operating-points-v2";
> +
> +               opp-19200000 {
> +                       opp-hz = /bits/ 64 <19200000>;
> +                       required-opps = <&rpmhpd_opp_min_svs>;
> +               };
> +
> +               opp-100000000 {
> +                       opp-hz = /bits/ 64 <100000000>;
> +                       required-opps = <&rpmhpd_opp_low_svs>;
> +               };
> +
> +               opp-150000000 {
> +                       opp-hz = /bits/ 64 <150000000>;
> +                       required-opps = <&rpmhpd_opp_svs>;
> +               };
> +
> +               opp-300000000 {
> +                       opp-hz = /bits/ 64 <300000000>;
> +                       required-opps = <&rpmhpd_opp_nom>;
> +               };
> +       };
> +
> +       qup_opp_table: opp-table-qup {
> +               compatible = "operating-points-v2";
> +
> +               opp-50000000 {
> +                       opp-hz = /bits/ 64 <50000000>;
> +                       required-opps = <&rpmhpd_opp_min_svs>;
> +               };
> +
> +               opp-75000000 {
> +                       opp-hz = /bits/ 64 <75000000>;
> +                       required-opps = <&rpmhpd_opp_low_svs>;
> +               };
> +
> +               opp-100000000 {
> +                       opp-hz = /bits/ 64 <100000000>;
> +                       required-opps = <&rpmhpd_opp_svs>;
> +               };
> +
> +               opp-128000000 {
> +                       opp-hz = /bits/ 64 <128000000>;
> +                       required-opps = <&rpmhpd_opp_nom>;
> +               };
> +       };
> +
> +       pmu {
> +               compatible = "arm,armv8-pmuv3";
> +               interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +       };
> +
> +       psci: psci {
> +               compatible = "arm,psci-1.0";
> +               method = "smc";
> +
> +               CPU_PD0: power-domain-cpu0 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD1: power-domain-cpu1 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD2: power-domain-cpu2 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD3: power-domain-cpu3 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD4: power-domain-cpu4 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD5: power-domain-cpu5 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD6: power-domain-cpu6 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +               };
> +
> +               CPU_PD7: power-domain-cpu7 {
> +                       #power-domain-cells = <0>;
> +                       power-domains = <&CLUSTER_PD>;
> +                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +               };
> +
> +               CLUSTER_PD: power-domain-cluster {
> +                       #power-domain-cells = <0>;
> +                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> +               };
> +       };
> +
> +       reserved-memory {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges;
> +
> +               hyp_mem: hyp-mem at 85700000 {
> +                       reg = <0 0x85700000 0 0x600000>;
> +                       no-map;
> +               };
> +
> +               xbl_mem: xbl-mem at 85e00000 {
> +                       reg = <0 0x85e00000 0 0x100000>;
> +                       no-map;
> +               };
> +
> +               aop_mem: aop-mem at 85fc0000 {
> +                       reg = <0 0x85fc0000 0 0x20000>;
> +                       no-map;
> +               };
> +
> +               aop_cmd_db_mem: aop-cmd-db-mem at 85fe0000 {
> +                       compatible = "qcom,cmd-db";
> +                       reg = <0x0 0x85fe0000 0 0x20000>;
> +                       no-map;
> +               };
> +
> +               smem at 86000000 {
> +                       compatible = "qcom,smem";
> +                       reg = <0x0 0x86000000 0 0x200000>;
> +                       no-map;
> +                       hwlocks = <&tcsr_mutex 3>;
> +               };
> +
> +               tz_mem: tz at 86200000 {
> +                       reg = <0 0x86200000 0 0x2d00000>;
> +                       no-map;
> +               };
> +
> +               rmtfs_mem: rmtfs at 88f00000 {
> +                       compatible = "qcom,rmtfs-mem";
> +                       reg = <0 0x88f00000 0 0x200000>;
> +                       no-map;
> +
> +                       qcom,client-id = <1>;
> +                       qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
> +               };
> +
> +               qseecom_mem: qseecom at 8ab00000 {
> +                       reg = <0 0x8ab00000 0 0x1400000>;
> +                       no-map;
> +               };
> +
> +               camera_mem: camera-mem at 8bf00000 {
> +                       reg = <0 0x8bf00000 0 0x500000>;
> +                       no-map;
> +               };
> +
> +               ipa_fw_mem: ipa-fw at 8c400000 {
> +                       reg = <0 0x8c400000 0 0x10000>;
> +                       no-map;
> +               };
> +
> +               ipa_gsi_mem: ipa-gsi at 8c410000 {
> +                       reg = <0 0x8c410000 0 0x5000>;
> +                       no-map;
> +               };
> +
> +               gpu_mem: gpu at 8c415000 {
> +                       reg = <0 0x8c415000 0 0x2000>;
> +                       no-map;
> +               };
> +
> +               adsp_mem: adsp at 8c500000 {
> +                       reg = <0 0x8c500000 0 0x1a00000>;
> +                       no-map;
> +               };
> +
> +               wlan_msa_mem: wlan-msa at 8df00000 {
> +                       reg = <0 0x8df00000 0 0x100000>;
> +                       no-map;
> +               };
> +
> +               mpss_region: mpss at 8e000000 {
> +                       reg = <0 0x8e000000 0 0x7800000>;
> +                       no-map;
> +               };
> +
> +               venus_mem: venus at 95800000 {
> +                       reg = <0 0x95800000 0 0x500000>;
> +                       no-map;
> +               };
> +
> +               cdsp_mem: cdsp at 95d00000 {
> +                       reg = <0 0x95d00000 0 0x800000>;
> +                       no-map;
> +               };
> +
> +               mba_region: mba at 96500000 {
> +                       reg = <0 0x96500000 0 0x200000>;
> +                       no-map;
> +               };
> +
> +               slpi_mem: slpi at 96700000 {
> +                       reg = <0 0x96700000 0 0x1400000>;
> +                       no-map;
> +               };
> +
> +               spss_mem: spss at 97b00000 {
> +                       reg = <0 0x97b00000 0 0x100000>;
> +                       no-map;
> +               };
> +
> +               mdata_mem: mpss-metadata {
> +                       alloc-ranges = <0 0xa0000000 0 0x20000000>;
> +                       size = <0 0x4000>;
> +                       no-map;
> +               };
> +
> +               fastrpc_mem: fastrpc {
> +                       compatible = "shared-dma-pool";
> +                       alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
> +                       alignment = <0x0 0x400000>;
> +                       size = <0x0 0x1000000>;
> +                       reusable;
> +               };
> +       };
> +
> +       adsp_pas: remoteproc-adsp {
> +               compatible = "qcom,sdm845-adsp-pas";
> +
> +               interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> +                                     <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                                     <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                                     <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                                     <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +               interrupt-names = "wdog", "fatal", "ready",
> +                                 "handover", "stop-ack";
> +
> +               clocks = <&rpmhcc RPMH_CXO_CLK>;
> +               clock-names = "xo";
> +
> +               memory-region = <&adsp_mem>;
> +
> +               qcom,qmp = <&aoss_qmp>;
> +
> +               qcom,smem-states = <&adsp_smp2p_out 0>;
> +               qcom,smem-state-names = "stop";
> +
> +               status = "disabled";
> +
> +               glink-edge {
> +                       interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> +                       label = "lpass";
> +                       qcom,remote-pid = <2>;
> +                       mboxes = <&apss_shared 8>;
> +
> +                       apr {
> +                               compatible = "qcom,apr-v2";
> +                               qcom,glink-channels = "apr_audio_svc";
> +                               qcom,domain = <APR_DOMAIN_ADSP>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               qcom,intents = <512 20>;
> +
> +                               service at 3 {
> +                                       reg = <APR_SVC_ADSP_CORE>;
> +                                       compatible = "qcom,q6core";
> +                                       qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +                               };
> +
> +                               q6afe: service at 4 {
> +                                       compatible = "qcom,q6afe";
> +                                       reg = <APR_SVC_AFE>;
> +                                       qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +                                       q6afedai: dais {
> +                                               compatible = "qcom,q6afe-dais";
> +                                               #address-cells = <1>;
> +                                               #size-cells = <0>;
> +                                               #sound-dai-cells = <1>;
> +                                       };
> +                               };
> +
> +                               q6asm: service at 7 {
> +                                       compatible = "qcom,q6asm";
> +                                       reg = <APR_SVC_ASM>;
> +                                       qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +                                       q6asmdai: dais {
> +                                               compatible = "qcom,q6asm-dais";
> +                                               #address-cells = <1>;
> +                                               #size-cells = <0>;
> +                                               #sound-dai-cells = <1>;
> +                                               iommus = <&apps_smmu 0x1821 0x0>;
> +                                       };
> +                               };
> +
> +                               q6adm: service at 8 {
> +                                       compatible = "qcom,q6adm";
> +                                       reg = <APR_SVC_ADM>;
> +                                       qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +                                       q6routing: routing {
> +                                               compatible = "qcom,q6adm-routing";
> +                                               #sound-dai-cells = <0>;
> +                                       };
> +                               };
> +                       };
> +
> +                       fastrpc {
> +                               compatible = "qcom,fastrpc";
> +                               qcom,glink-channels = "fastrpcglink-apps-dsp";
> +                               label = "adsp";
> +                               qcom,non-secure-domain;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               compute-cb at 3 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <3>;
> +                                       iommus = <&apps_smmu 0x1823 0x0>;
> +                               };
> +
> +                               compute-cb at 4 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <4>;
> +                                       iommus = <&apps_smmu 0x1824 0x0>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       cdsp_pas: remoteproc-cdsp {
> +               compatible = "qcom,sdm845-cdsp-pas";
> +
> +               interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
> +                                     <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                                     <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                                     <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                                     <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +               interrupt-names = "wdog", "fatal", "ready",
> +                                 "handover", "stop-ack";
> +
> +               clocks = <&rpmhcc RPMH_CXO_CLK>;
> +               clock-names = "xo";
> +
> +               memory-region = <&cdsp_mem>;
> +
> +               qcom,qmp = <&aoss_qmp>;
> +
> +               qcom,smem-states = <&cdsp_smp2p_out 0>;
> +               qcom,smem-state-names = "stop";
> +
> +               status = "disabled";
> +
> +               glink-edge {
> +                       interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
> +                       label = "turing";
> +                       qcom,remote-pid = <5>;
> +                       mboxes = <&apss_shared 4>;
> +                       fastrpc {
> +                               compatible = "qcom,fastrpc";
> +                               qcom,glink-channels = "fastrpcglink-apps-dsp";
> +                               label = "cdsp";
> +                               qcom,non-secure-domain;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               compute-cb at 1 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <1>;
> +                                       iommus = <&apps_smmu 0x1401 0x30>;
> +                               };
> +
> +                               compute-cb at 2 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <2>;
> +                                       iommus = <&apps_smmu 0x1402 0x30>;
> +                               };
> +
> +                               compute-cb at 3 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <3>;
> +                                       iommus = <&apps_smmu 0x1403 0x30>;
> +                               };
> +
> +                               compute-cb at 4 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <4>;
> +                                       iommus = <&apps_smmu 0x1404 0x30>;
> +                               };
> +
> +                               compute-cb at 5 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <5>;
> +                                       iommus = <&apps_smmu 0x1405 0x30>;
> +                               };
> +
> +                               compute-cb at 6 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <6>;
> +                                       iommus = <&apps_smmu 0x1406 0x30>;
> +                               };
> +
> +                               compute-cb at 7 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <7>;
> +                                       iommus = <&apps_smmu 0x1407 0x30>;
> +                               };
> +
> +                               compute-cb at 8 {
> +                                       compatible = "qcom,fastrpc-compute-cb";
> +                                       reg = <8>;
> +                                       iommus = <&apps_smmu 0x1408 0x30>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       smp2p-cdsp {
> +               compatible = "qcom,smp2p";
> +               qcom,smem = <94>, <432>;
> +
> +               interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
> +
> +               mboxes = <&apss_shared 6>;
> +
> +               qcom,local-pid = <0>;
> +               qcom,remote-pid = <5>;
> +
> +               cdsp_smp2p_out: master-kernel {
> +                       qcom,entry-name = "master-kernel";
> +                       #qcom,smem-state-cells = <1>;
> +               };
> +
> +               cdsp_smp2p_in: slave-kernel {
> +                       qcom,entry-name = "slave-kernel";
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +               };
> +       };
> +
> +       smp2p-lpass {
> +               compatible = "qcom,smp2p";
> +               qcom,smem = <443>, <429>;
> +
> +               interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
> +
> +               mboxes = <&apss_shared 10>;
> +
> +               qcom,local-pid = <0>;
> +               qcom,remote-pid = <2>;
> +
> +               adsp_smp2p_out: master-kernel {
> +                       qcom,entry-name = "master-kernel";
> +                       #qcom,smem-state-cells = <1>;
> +               };
> +
> +               adsp_smp2p_in: slave-kernel {
> +                       qcom,entry-name = "slave-kernel";
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +               };
> +       };
> +
> +       smp2p-mpss {
> +               compatible = "qcom,smp2p";
> +               qcom,smem = <435>, <428>;
> +               interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
> +               mboxes = <&apss_shared 14>;
> +               qcom,local-pid = <0>;
> +               qcom,remote-pid = <1>;
> +
> +               modem_smp2p_out: master-kernel {
> +                       qcom,entry-name = "master-kernel";
> +                       #qcom,smem-state-cells = <1>;
> +               };
> +
> +               modem_smp2p_in: slave-kernel {
> +                       qcom,entry-name = "slave-kernel";
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +               };
> +
> +               ipa_smp2p_out: ipa-ap-to-modem {
> +                       qcom,entry-name = "ipa";
> +                       #qcom,smem-state-cells = <1>;
> +               };
> +
> +               ipa_smp2p_in: ipa-modem-to-ap {
> +                       qcom,entry-name = "ipa";
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +               };
> +       };
> +
> +       smp2p-slpi {
> +               compatible = "qcom,smp2p";
> +               qcom,smem = <481>, <430>;
> +               interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
> +               mboxes = <&apss_shared 26>;
> +               qcom,local-pid = <0>;
> +               qcom,remote-pid = <3>;
> +
> +               slpi_smp2p_out: master-kernel {
> +                       qcom,entry-name = "master-kernel";
> +                       #qcom,smem-state-cells = <1>;
> +               };
> +
> +               slpi_smp2p_in: slave-kernel {
> +                       qcom,entry-name = "slave-kernel";
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +               };
> +       };
> +
> +       soc: soc at 0 {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges = <0 0 0 0 0x10 0>;
> +               dma-ranges = <0 0 0 0 0x10 0>;
>                 compatible = "simple-bus";
>
>                 gcc: clock-controller at 100000 {
>                         compatible = "qcom,gcc-sdm845";
> -                       reg = <0x100000 0x1f0000>;
> +                       reg = <0 0x00100000 0 0x1f0000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <&rpmhcc RPMH_CXO_CLK_A>,
> +                                <&sleep_clk>,
> +                                <&pcie0_phy>,
> +                                <&pcie1_phy>;
> +                       clock-names = "bi_tcxo",
> +                                     "bi_tcxo_ao",
> +                                     "sleep_clk",
> +                                     "pcie_0_pipe_clk",
> +                                     "pcie_1_pipe_clk";
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +                       power-domains = <&rpmhpd SDM845_CX>;
> +               };
> +
> +               qfprom at 784000 {
> +                       compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
> +                       reg = <0 0x00784000 0 0x8ff>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +
> +                       qusb2p_hstx_trim: hstx-trim-primary at 1eb {
> +                               reg = <0x1eb 0x1>;
> +                               bits = <1 4>;
> +                       };
> +
> +                       qusb2s_hstx_trim: hstx-trim-secondary at 1eb {
> +                               reg = <0x1eb 0x2>;
> +                               bits = <6 4>;
> +                       };
> +               };
> +
> +               rng: rng at 793000 {
> +                       compatible = "qcom,prng-ee";
> +                       reg = <0 0x00793000 0 0x1000>;
> +                       clocks = <&gcc GCC_PRNG_AHB_CLK>;
> +                       clock-names = "core";
> +               };
> +
> +               gpi_dma0: dma-controller at 800000 {
> +                       #dma-cells = <3>;
> +                       compatible = "qcom,sdm845-gpi-dma";
> +                       reg = <0 0x00800000 0 0x60000>;
> +                       interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> +                       dma-channels = <13>;
> +                       dma-channel-mask = <0xfa>;
> +                       iommus = <&apps_smmu 0x0016 0x0>;
> +                       status = "disabled";
> +               };
> +
> +               qupv3_id_0: geniqup at 8c0000 {
> +                       compatible = "qcom,geni-se-qup";
> +                       reg = <0 0x008c0000 0 0x6000>;
> +                       clock-names = "m-ahb", "s-ahb";
> +                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +                                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +                       iommus = <&apps_smmu 0x3 0x0>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
> +                       interconnect-names = "qup-core";
> +                       status = "disabled";
> +
> +                       i2c0: i2c at 880000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00880000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c0_default>;
> +                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi0: spi at 880000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00880000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi0_default>;
> +                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart0: serial at 880000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00880000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart0_default>;
> +                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c1: i2c at 884000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00884000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c1_default>;
> +                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi1: spi at 884000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00884000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi1_default>;
> +                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 1 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart1: serial at 884000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00884000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart1_default>;
> +                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c2: i2c at 888000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00888000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c2_default>;
> +                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi2: spi at 888000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00888000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi2_default>;
> +                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart2: serial at 888000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00888000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart2_default>;
> +                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c3: i2c at 88c000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x0088c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c3_default>;
> +                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi3: spi at 88c000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x0088c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi3_default>;
> +                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 3 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart3: serial at 88c000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x0088c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart3_default>;
> +                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c4: i2c at 890000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00890000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c4_default>;
> +                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi4: spi at 890000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00890000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi4_default>;
> +                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 4 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart4: serial at 890000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00890000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart4_default>;
> +                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c5: i2c at 894000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00894000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c5_default>;
> +                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 5 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi5: spi at 894000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00894000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi5_default>;
> +                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 5 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart5: serial at 894000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00894000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart5_default>;
> +                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c6: i2c at 898000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00898000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c6_default>;
> +                               interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
> +                                      <&gpi_dma0 1 6 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi6: spi at 898000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00898000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi6_default>;
> +                               interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 6 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart6: serial at 898000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00898000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart6_default>;
> +                               interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c7: i2c at 89c000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x0089c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c7_default>;
> +                               interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               status = "disabled";
> +                       };
> +
> +                       spi7: spi at 89c000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x0089c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi7_default>;
> +                               interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
> +                                      <&gpi_dma0 1 7 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart7: serial at 89c000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x0089c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart7_default>;
> +                               interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               gpi_dma1: dma-controller at a00000 {
> +                       #dma-cells = <3>;
> +                       compatible = "qcom,sdm845-gpi-dma";
> +                       reg = <0 0x00a00000 0 0x60000>;
> +                       interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> +                       dma-channels = <13>;
> +                       dma-channel-mask = <0xfa>;
> +                       iommus = <&apps_smmu 0x06d6 0x0>;
> +                       status = "disabled";
> +               };
> +
> +               qupv3_id_1: geniqup at ac0000 {
> +                       compatible = "qcom,geni-se-qup";
> +                       reg = <0 0x00ac0000 0 0x6000>;
> +                       clock-names = "m-ahb", "s-ahb";
> +                       clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +                                <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +                       iommus = <&apps_smmu 0x6c3 0x0>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
> +                       interconnect-names = "qup-core";
> +                       status = "disabled";
> +
> +                       i2c8: i2c at a80000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a80000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c8_default>;
> +                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi8: spi at a80000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a80000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi8_default>;
> +                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart8: serial at a80000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a80000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart8_default>;
> +                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c9: i2c at a84000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a84000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c9_default>;
> +                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi9: spi at a84000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a84000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi9_default>;
> +                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart9: serial at a84000 {
> +                               compatible = "qcom,geni-debug-uart";
> +                               reg = <0 0x00a84000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart9_default>;
> +                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c10: i2c at a88000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a88000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c10_default>;
> +                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi10: spi at a88000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a88000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi10_default>;
> +                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 2 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart10: serial at a88000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a88000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart10_default>;
> +                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c11: i2c at a8c000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a8c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c11_default>;
> +                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi11: spi at a8c000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a8c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi11_default>;
> +                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart11: serial at a8c000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a8c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart11_default>;
> +                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c12: i2c at a90000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a90000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c12_default>;
> +                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi12: spi at a90000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a90000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi12_default>;
> +                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart12: serial at a90000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a90000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart12_default>;
> +                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c13: i2c at a94000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a94000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c13_default>;
> +                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 5 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi13: spi at a94000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a94000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi13_default>;
> +                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 5 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart13: serial at a94000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a94000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart13_default>;
> +                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c14: i2c at a98000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a98000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c14_default>;
> +                               interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 6 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       spi14: spi at a98000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a98000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi14_default>;
> +                               interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 6 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart14: serial at a98000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a98000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart14_default>;
> +                               interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +
> +                       i2c15: i2c at a9c000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00a9c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_i2c15_default>;
> +                               interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               status = "disabled";
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
> +                               interconnect-names = "qup-core", "qup-config", "qup-memory";
> +                               dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
> +                                      <&gpi_dma1 1 7 QCOM_GPI_I2C>;
> +                               dma-names = "tx", "rx";
> +                       };
> +
> +                       spi15: spi at a9c000 {
> +                               compatible = "qcom,geni-spi";
> +                               reg = <0 0x00a9c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_spi15_default>;
> +                               interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
> +                                      <&gpi_dma1 1 7 QCOM_GPI_SPI>;
> +                               dma-names = "tx", "rx";
> +                               status = "disabled";
> +                       };
> +
> +                       uart15: serial at a9c000 {
> +                               compatible = "qcom,geni-uart";
> +                               reg = <0 0x00a9c000 0 0x4000>;
> +                               clock-names = "se";
> +                               clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +                               pinctrl-names = "default";
> +                               pinctrl-0 = <&qup_uart15_default>;
> +                               interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +                               operating-points-v2 = <&qup_opp_table>;
> +                               interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
> +                                               <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
> +                               interconnect-names = "qup-core", "qup-config";
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               llcc: system-cache-controller at 1100000 {
> +                       compatible = "qcom,sdm845-llcc";
> +                       reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
> +                             <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
> +                             <0 0x01300000 0 0x50000>;
> +                       reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
> +                                   "llcc3_base", "llcc_broadcast_base";
> +                       interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
> +               };
> +
> +               dma at 10a2000 {
> +                       compatible = "qcom,sdm845-dcc", "qcom,dcc";
> +                       reg = <0x0 0x010a2000 0x0 0x1000>,
> +                             <0x0 0x010ae000 0x0 0x2000>;
> +               };
> +
> +               pmu at 114a000 {
> +                       compatible = "qcom,sdm845-llcc-bwmon";
> +                       reg = <0 0x0114a000 0 0x1000>;
> +                       interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
> +                       interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
> +
> +                       operating-points-v2 = <&llcc_bwmon_opp_table>;
> +
> +                       llcc_bwmon_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               /*
> +                                * The interconnect path bandwidth taken from
> +                                * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
> +                                * interconnect.  This also matches the
> +                                * bandwidth table of qcom,llccbw (qcom,bw-tbl,
> +                                * bus width: 4 bytes) from msm-4.9 downstream
> +                                * kernel.
> +                                */
> +                               opp-0 {
> +                                       opp-peak-kBps = <800000>;
> +                               };
> +                               opp-1 {
> +                                       opp-peak-kBps = <1804000>;
> +                               };
> +                               opp-2 {
> +                                       opp-peak-kBps = <3072000>;
> +                               };
> +                               opp-3 {
> +                                       opp-peak-kBps = <5412000>;
> +                               };
> +                               opp-4 {
> +                                       opp-peak-kBps = <7216000>;
> +                               };
> +                       };
> +               };
> +
> +               pmu at 1436400 {
> +                       compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
> +                       reg = <0 0x01436400 0 0x600>;
> +                       interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +                       interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
> +
> +                       operating-points-v2 = <&cpu_bwmon_opp_table>;
> +
> +                       cpu_bwmon_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               /*
> +                                * The interconnect path bandwidth taken from
> +                                * cpu4_opp_table bandwidth for OSM L3
> +                                * interconnect.  This also matches the OSM L3
> +                                * from bandwidth table of qcom,cpu4-l3lat-mon
> +                                * (qcom,core-dev-table, bus width: 16 bytes)
> +                                * from msm-4.9 downstream kernel.
> +                                */
> +                               opp-0 {
> +                                       opp-peak-kBps = <4800000>;
> +                               };
> +                               opp-1 {
> +                                       opp-peak-kBps = <9216000>;
> +                               };
> +                               opp-2 {
> +                                       opp-peak-kBps = <15052800>;
> +                               };
> +                               opp-3 {
> +                                       opp-peak-kBps = <20889600>;
> +                               };
> +                               opp-4 {
> +                                       opp-peak-kBps = <25497600>;
> +                               };
> +                       };
> +               };
> +
> +               pcie0: pci at 1c00000 {
> +                       compatible = "qcom,pcie-sdm845";
> +                       reg = <0 0x01c00000 0 0x2000>,
> +                             <0 0x60000000 0 0xf1d>,
> +                             <0 0x60000f20 0 0xa8>,
> +                             <0 0x60100000 0 0x100000>,
> +                             <0 0x01c07000 0 0x1000>;
> +                       reg-names = "parf", "dbi", "elbi", "config", "mhi";
> +                       device_type = "pci";
> +                       linux,pci-domain = <0>;
> +                       bus-range = <0x00 0xff>;
> +                       num-lanes = <1>;
> +
> +                       #address-cells = <3>;
> +                       #size-cells = <2>;
> +
> +                       ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
> +                                <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
> +
> +                       interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "msi";
> +                       #interrupt-cells = <1>;
> +                       interrupt-map-mask = <0 0 0 0x7>;
> +                       interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                                       <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                                       <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                                       <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> +                       clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
> +                                <&gcc GCC_PCIE_0_AUX_CLK>,
> +                                <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +                                <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +                                <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +                                <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
> +                                <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
> +                       clock-names = "pipe",
> +                                     "aux",
> +                                     "cfg",
> +                                     "bus_master",
> +                                     "bus_slave",
> +                                     "slave_q2a",
> +                                     "tbu";
> +
> +                       iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
> +                                   <0x100 &apps_smmu 0x1c11 0x1>,
> +                                   <0x200 &apps_smmu 0x1c12 0x1>,
> +                                   <0x300 &apps_smmu 0x1c13 0x1>,
> +                                   <0x400 &apps_smmu 0x1c14 0x1>,
> +                                   <0x500 &apps_smmu 0x1c15 0x1>,
> +                                   <0x600 &apps_smmu 0x1c16 0x1>,
> +                                   <0x700 &apps_smmu 0x1c17 0x1>,
> +                                   <0x800 &apps_smmu 0x1c18 0x1>,
> +                                   <0x900 &apps_smmu 0x1c19 0x1>,
> +                                   <0xa00 &apps_smmu 0x1c1a 0x1>,
> +                                   <0xb00 &apps_smmu 0x1c1b 0x1>,
> +                                   <0xc00 &apps_smmu 0x1c1c 0x1>,
> +                                   <0xd00 &apps_smmu 0x1c1d 0x1>,
> +                                   <0xe00 &apps_smmu 0x1c1e 0x1>,
> +                                   <0xf00 &apps_smmu 0x1c1f 0x1>;
> +
> +                       resets = <&gcc GCC_PCIE_0_BCR>;
> +                       reset-names = "pci";
> +
> +                       power-domains = <&gcc PCIE_0_GDSC>;
> +
> +                       phys = <&pcie0_phy>;
> +                       phy-names = "pciephy";
> +
> +                       status = "disabled";
> +               };
> +
> +               pcie0_phy: phy at 1c06000 {
> +                       compatible = "qcom,sdm845-qmp-pcie-phy";
> +                       reg = <0 0x01c06000 0 0x1000>;
> +                       clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
> +                                <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +                                <&gcc GCC_PCIE_0_CLKREF_CLK>,
> +                                <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
> +                                <&gcc GCC_PCIE_0_PIPE_CLK>;
> +                       clock-names = "aux",
> +                                     "cfg_ahb",
> +                                     "ref",
> +                                     "refgen",
> +                                     "pipe";
> +
> +                       clock-output-names = "pcie_0_pipe_clk";
> +                       #clock-cells = <0>;
> +
> +                       #phy-cells = <0>;
> +
> +                       resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> +                       reset-names = "phy";
> +
> +                       assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
> +                       assigned-clock-rates = <100000000>;
> +
> +                       status = "disabled";
> +               };
> +
> +               pcie1: pci at 1c08000 {
> +                       compatible = "qcom,pcie-sdm845";
> +                       reg = <0 0x01c08000 0 0x2000>,
> +                             <0 0x40000000 0 0xf1d>,
> +                             <0 0x40000f20 0 0xa8>,
> +                             <0 0x40100000 0 0x100000>,
> +                             <0 0x01c0c000 0 0x1000>;
> +                       reg-names = "parf", "dbi", "elbi", "config", "mhi";
> +                       device_type = "pci";
> +                       linux,pci-domain = <1>;
> +                       bus-range = <0x00 0xff>;
> +                       num-lanes = <1>;
> +
> +                       #address-cells = <3>;
> +                       #size-cells = <2>;
> +
> +                       ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> +                                <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
> +
> +                       interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "msi";
> +                       #interrupt-cells = <1>;
> +                       interrupt-map-mask = <0 0 0 0x7>;
> +                       interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                                       <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                                       <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                                       <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> +                       clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
> +                                <&gcc GCC_PCIE_1_AUX_CLK>,
> +                                <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> +                                <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> +                                <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> +                                <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> +                                <&gcc GCC_PCIE_1_CLKREF_CLK>,
> +                                <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
> +                       clock-names = "pipe",
> +                                     "aux",
> +                                     "cfg",
> +                                     "bus_master",
> +                                     "bus_slave",
> +                                     "slave_q2a",
> +                                     "ref",
> +                                     "tbu";
> +
> +                       assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> +                       assigned-clock-rates = <19200000>;
> +
> +                       iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
> +                                   <0x100 &apps_smmu 0x1c01 0x1>,
> +                                   <0x200 &apps_smmu 0x1c02 0x1>,
> +                                   <0x300 &apps_smmu 0x1c03 0x1>,
> +                                   <0x400 &apps_smmu 0x1c04 0x1>,
> +                                   <0x500 &apps_smmu 0x1c05 0x1>,
> +                                   <0x600 &apps_smmu 0x1c06 0x1>,
> +                                   <0x700 &apps_smmu 0x1c07 0x1>,
> +                                   <0x800 &apps_smmu 0x1c08 0x1>,
> +                                   <0x900 &apps_smmu 0x1c09 0x1>,
> +                                   <0xa00 &apps_smmu 0x1c0a 0x1>,
> +                                   <0xb00 &apps_smmu 0x1c0b 0x1>,
> +                                   <0xc00 &apps_smmu 0x1c0c 0x1>,
> +                                   <0xd00 &apps_smmu 0x1c0d 0x1>,
> +                                   <0xe00 &apps_smmu 0x1c0e 0x1>,
> +                                   <0xf00 &apps_smmu 0x1c0f 0x1>;
> +
> +                       resets = <&gcc GCC_PCIE_1_BCR>;
> +                       reset-names = "pci";
> +
> +                       power-domains = <&gcc PCIE_1_GDSC>;
> +
> +                       phys = <&pcie1_phy>;
> +                       phy-names = "pciephy";
> +
> +                       status = "disabled";
> +               };
> +
> +               pcie1_phy: phy at 1c0a000 {
> +                       compatible = "qcom,sdm845-qhp-pcie-phy";
> +                       reg = <0 0x01c0a000 0 0x2000>;
> +                       clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
> +                                <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> +                                <&gcc GCC_PCIE_1_CLKREF_CLK>,
> +                                <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
> +                                <&gcc GCC_PCIE_1_PIPE_CLK>;
> +                       clock-names = "aux",
> +                                     "cfg_ahb",
> +                                     "ref",
> +                                     "refgen",
> +                                     "pipe";
> +
> +                       clock-output-names = "pcie_1_pipe_clk";
> +                       #clock-cells = <0>;
> +
> +                       #phy-cells = <0>;
> +
> +                       resets = <&gcc GCC_PCIE_1_PHY_BCR>;
> +                       reset-names = "phy";
> +
> +                       assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
> +                       assigned-clock-rates = <100000000>;
> +
> +                       status = "disabled";
> +               };
> +
> +               mem_noc: interconnect at 1380000 {
> +                       compatible = "qcom,sdm845-mem-noc";
> +                       reg = <0 0x01380000 0 0x27200>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               dc_noc: interconnect at 14e0000 {
> +                       compatible = "qcom,sdm845-dc-noc";
> +                       reg = <0 0x014e0000 0 0x400>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               config_noc: interconnect at 1500000 {
> +                       compatible = "qcom,sdm845-config-noc";
> +                       reg = <0 0x01500000 0 0x5080>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               system_noc: interconnect at 1620000 {
> +                       compatible = "qcom,sdm845-system-noc";
> +                       reg = <0 0x01620000 0 0x18080>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               aggre1_noc: interconnect at 16e0000 {
> +                       compatible = "qcom,sdm845-aggre1-noc";
> +                       reg = <0 0x016e0000 0 0x15080>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               aggre2_noc: interconnect at 1700000 {
> +                       compatible = "qcom,sdm845-aggre2-noc";
> +                       reg = <0 0x01700000 0 0x1f300>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               mmss_noc: interconnect at 1740000 {
> +                       compatible = "qcom,sdm845-mmss-noc";
> +                       reg = <0 0x01740000 0 0x1c100>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               ufs_mem_hc: ufshc at 1d84000 {
> +                       compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
> +                                    "jedec,ufs-2.0";
> +                       reg = <0 0x01d84000 0 0x2500>,
> +                             <0 0x01d90000 0 0x8000>;
> +                       reg-names = "std", "ice";
> +                       interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +                       phys = <&ufs_mem_phy_lanes>;
> +                       phy-names = "ufsphy";
> +                       lanes-per-direction = <2>;
> +                       power-domains = <&gcc UFS_PHY_GDSC>;
> +                       #reset-cells = <1>;
> +                       resets = <&gcc GCC_UFS_PHY_BCR>;
> +                       reset-names = "rst";
> +
> +                       iommus = <&apps_smmu 0x100 0xf>;
> +
> +                       clock-names =
> +                               "core_clk",
> +                               "bus_aggr_clk",
> +                               "iface_clk",
> +                               "core_clk_unipro",
> +                               "ref_clk",
> +                               "tx_lane0_sync_clk",
> +                               "rx_lane0_sync_clk",
> +                               "rx_lane1_sync_clk",
> +                               "ice_core_clk";
> +                       clocks =
> +                               <&gcc GCC_UFS_PHY_AXI_CLK>,
> +                               <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +                               <&gcc GCC_UFS_PHY_AHB_CLK>,
> +                               <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +                               <&rpmhcc RPMH_CXO_CLK>,
> +                               <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +                               <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +                               <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
> +                               <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +                       freq-table-hz =
> +                               <50000000 200000000>,
> +                               <0 0>,
> +                               <0 0>,
> +                               <37500000 150000000>,
> +                               <0 0>,
> +                               <0 0>,
> +                               <0 0>,
> +                               <0 0>,
> +                               <75000000 300000000>;
> +
> +                       interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
> +                       interconnect-names = "ufs-ddr", "cpu-ufs";
> +
> +                       status = "disabled";
> +               };
> +
> +               ufs_mem_phy: phy at 1d87000 {
> +                       compatible = "qcom,sdm845-qmp-ufs-phy";
> +                       reg = <0 0x01d87000 0 0x18c>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       clock-names = "ref",
> +                                     "ref_aux";
> +                       clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
> +                                <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +
> +                       resets = <&ufs_mem_hc 0>;
> +                       reset-names = "ufsphy";
> +                       status = "disabled";
> +
> +                       ufs_mem_phy_lanes: phy at 1d87400 {
> +                               reg = <0 0x01d87400 0 0x108>,
> +                                     <0 0x01d87600 0 0x1e0>,
> +                                     <0 0x01d87c00 0 0x1dc>,
> +                                     <0 0x01d87800 0 0x108>,
> +                                     <0 0x01d87a00 0 0x1e0>;
> +                               #phy-cells = <0>;
> +                       };
> +               };
> +
> +               cryptobam: dma-controller at 1dc4000 {
> +                       compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +                       reg = <0 0x01dc4000 0 0x24000>;
> +                       interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&rpmhcc RPMH_CE_CLK>;
> +                       clock-names = "bam_clk";
> +                       #dma-cells = <1>;
> +                       qcom,ee = <0>;
> +                       qcom,controlled-remotely;
> +                       iommus = <&apps_smmu 0x704 0x1>,
> +                                <&apps_smmu 0x706 0x1>,
> +                                <&apps_smmu 0x714 0x1>,
> +                                <&apps_smmu 0x716 0x1>;
> +               };
> +
> +               crypto: crypto at 1dfa000 {
> +                       compatible = "qcom,crypto-v5.4";
> +                       reg = <0 0x01dfa000 0 0x6000>;
> +                       clocks = <&gcc GCC_CE1_AHB_CLK>,
> +                                <&gcc GCC_CE1_AXI_CLK>,
> +                                <&rpmhcc RPMH_CE_CLK>;
> +                       clock-names = "iface", "bus", "core";
> +                       dmas = <&cryptobam 6>, <&cryptobam 7>;
> +                       dma-names = "rx", "tx";
> +                       iommus = <&apps_smmu 0x704 0x1>,
> +                                <&apps_smmu 0x706 0x1>,
> +                                <&apps_smmu 0x714 0x1>,
> +                                <&apps_smmu 0x716 0x1>;
> +               };
> +
> +               ipa: ipa at 1e40000 {
> +                       compatible = "qcom,sdm845-ipa";
> +
> +                       iommus = <&apps_smmu 0x720 0x0>,
> +                                <&apps_smmu 0x722 0x0>;
> +                       reg = <0 0x01e40000 0 0x7000>,
> +                             <0 0x01e47000 0 0x2000>,
> +                             <0 0x01e04000 0 0x2c000>;
> +                       reg-names = "ipa-reg",
> +                                   "ipa-shared",
> +                                   "gsi";
> +
> +                       interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
> +                                             <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
> +                                             <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                                             <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "ipa",
> +                                         "gsi",
> +                                         "ipa-clock-query",
> +                                         "ipa-setup-ready";
> +
> +                       clocks = <&rpmhcc RPMH_IPA_CLK>;
> +                       clock-names = "core";
> +
> +                       interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
> +                                       <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
> +                       interconnect-names = "memory",
> +                                            "imem",
> +                                            "config";
> +
> +                       qcom,smem-states = <&ipa_smp2p_out 0>,
> +                                          <&ipa_smp2p_out 1>;
> +                       qcom,smem-state-names = "ipa-clock-enabled-valid",
> +                                               "ipa-clock-enabled";
> +
> +                       status = "disabled";
> +               };
> +
> +               tcsr_mutex: hwlock at 1f40000 {
> +                       compatible = "qcom,tcsr-mutex";
> +                       reg = <0 0x01f40000 0 0x20000>;
> +                       #hwlock-cells = <1>;
> +               };
> +
> +               tcsr_regs_1: syscon at 1f60000 {
> +                       compatible = "qcom,sdm845-tcsr", "syscon";
> +                       reg = <0 0x01f60000 0 0x20000>;
> +               };
> +
> +               tlmm: pinctrl at 3400000 {
> +                       compatible = "qcom,sdm845-pinctrl";
> +                       reg = <0 0x03400000 0 0xc00000>;
> +                       interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +                       gpio-ranges = <&tlmm 0 0 151>;
> +                       wakeup-parent = <&pdc_intc>;
> +
> +                       cci0_default: cci0-default-state {
> +                               /* SDA, SCL */
> +                               pins = "gpio17", "gpio18";
> +                               function = "cci_i2c";
> +
> +                               bias-pull-up;
> +                               drive-strength = <2>; /* 2 mA */
> +                       };
> +
> +                       cci0_sleep: cci0-sleep-state {
> +                               /* SDA, SCL */
> +                               pins = "gpio17", "gpio18";
> +                               function = "cci_i2c";
> +
> +                               drive-strength = <2>; /* 2 mA */
> +                               bias-pull-down;
> +                       };
> +
> +                       cci1_default: cci1-default-state {
> +                               /* SDA, SCL */
> +                               pins = "gpio19", "gpio20";
> +                               function = "cci_i2c";
> +
> +                               bias-pull-up;
> +                               drive-strength = <2>; /* 2 mA */
> +                       };
> +
> +                       cci1_sleep: cci1-sleep-state {
> +                               /* SDA, SCL */
> +                               pins = "gpio19", "gpio20";
> +                               function = "cci_i2c";
> +
> +                               drive-strength = <2>; /* 2 mA */
> +                               bias-pull-down;
> +                       };
> +
> +                       qspi_clk: qspi-clk-state {
> +                               pins = "gpio95";
> +                               function = "qspi_clk";
> +                       };
> +
> +                       qspi_cs0: qspi-cs0-state {
> +                               pins = "gpio90";
> +                               function = "qspi_cs";
> +                       };
> +
> +                       qspi_cs1: qspi-cs1-state {
> +                               pins = "gpio89";
> +                               function = "qspi_cs";
> +                       };
> +
> +                       qspi_data0: qspi-data0-state {
> +                               pins = "gpio91";
> +                               function = "qspi_data";
> +                       };
> +
> +                       qspi_data1: qspi-data1-state {
> +                               pins = "gpio92";
> +                               function = "qspi_data";
> +                       };
> +
> +                       qspi_data23: qspi-data23-state {
> +                               pins = "gpio93", "gpio94";
> +                               function = "qspi_data";
> +                       };
> +
> +                       qup_i2c0_default: qup-i2c0-default-state {
> +                               pins = "gpio0", "gpio1";
> +                               function = "qup0";
> +                       };
> +
> +                       qup_i2c1_default: qup-i2c1-default-state {
> +                               pins = "gpio17", "gpio18";
> +                               function = "qup1";
> +                       };
> +
> +                       qup_i2c2_default: qup-i2c2-default-state {
> +                               pins = "gpio27", "gpio28";
> +                               function = "qup2";
> +                       };
> +
> +                       qup_i2c3_default: qup-i2c3-default-state {
> +                               pins = "gpio41", "gpio42";
> +                               function = "qup3";
> +                       };
> +
> +                       qup_i2c4_default: qup-i2c4-default-state {
> +                               pins = "gpio89", "gpio90";
> +                               function = "qup4";
> +                       };
> +
> +                       qup_i2c5_default: qup-i2c5-default-state {
> +                               pins = "gpio85", "gpio86";
> +                               function = "qup5";
> +                       };
> +
> +                       qup_i2c6_default: qup-i2c6-default-state {
> +                               pins = "gpio45", "gpio46";
> +                               function = "qup6";
> +                       };
> +
> +                       qup_i2c7_default: qup-i2c7-default-state {
> +                               pins = "gpio93", "gpio94";
> +                               function = "qup7";
> +                       };
> +
> +                       qup_i2c8_default: qup-i2c8-default-state {
> +                               pins = "gpio65", "gpio66";
> +                               function = "qup8";
> +                       };
> +
> +                       qup_i2c9_default: qup-i2c9-default-state {
> +                               pins = "gpio6", "gpio7";
> +                               function = "qup9";
> +                       };
> +
> +                       qup_i2c10_default: qup-i2c10-default-state {
> +                               pins = "gpio55", "gpio56";
> +                               function = "qup10";
> +                       };
> +
> +                       qup_i2c11_default: qup-i2c11-default-state {
> +                               pins = "gpio31", "gpio32";
> +                               function = "qup11";
> +                       };
> +
> +                       qup_i2c12_default: qup-i2c12-default-state {
> +                               pins = "gpio49", "gpio50";
> +                               function = "qup12";
> +                       };
> +
> +                       qup_i2c13_default: qup-i2c13-default-state {
> +                               pins = "gpio105", "gpio106";
> +                               function = "qup13";
> +                       };
> +
> +                       qup_i2c14_default: qup-i2c14-default-state {
> +                               pins = "gpio33", "gpio34";
> +                               function = "qup14";
> +                       };
> +
> +                       qup_i2c15_default: qup-i2c15-default-state {
> +                               pins = "gpio81", "gpio82";
> +                               function = "qup15";
> +                       };
> +
> +                       qup_spi0_default: qup-spi0-default-state {
> +                               pins = "gpio0", "gpio1", "gpio2", "gpio3";
> +                               function = "qup0";
> +                       };
> +
> +                       qup_spi1_default: qup-spi1-default-state {
> +                               pins = "gpio17", "gpio18", "gpio19", "gpio20";
> +                               function = "qup1";
> +                       };
> +
> +                       qup_spi2_default: qup-spi2-default-state {
> +                               pins = "gpio27", "gpio28", "gpio29", "gpio30";
> +                               function = "qup2";
> +                       };
> +
> +                       qup_spi3_default: qup-spi3-default-state {
> +                               pins = "gpio41", "gpio42", "gpio43", "gpio44";
> +                               function = "qup3";
> +                       };
> +
> +                       qup_spi4_default: qup-spi4-default-state {
> +                               pins = "gpio89", "gpio90", "gpio91", "gpio92";
> +                               function = "qup4";
> +                       };
> +
> +                       qup_spi5_default: qup-spi5-default-state {
> +                               pins = "gpio85", "gpio86", "gpio87", "gpio88";
> +                               function = "qup5";
> +                       };
> +
> +                       qup_spi6_default: qup-spi6-default-state {
> +                               pins = "gpio45", "gpio46", "gpio47", "gpio48";
> +                               function = "qup6";
> +                       };
> +
> +                       qup_spi7_default: qup-spi7-default-state {
> +                               pins = "gpio93", "gpio94", "gpio95", "gpio96";
> +                               function = "qup7";
> +                       };
> +
> +                       qup_spi8_default: qup-spi8-default-state {
> +                               pins = "gpio65", "gpio66", "gpio67", "gpio68";
> +                               function = "qup8";
> +                       };
> +
> +                       qup_spi9_default: qup-spi9-default-state {
> +                               pins = "gpio6", "gpio7", "gpio4", "gpio5";
> +                               function = "qup9";
> +                       };
> +
> +                       qup_spi10_default: qup-spi10-default-state {
> +                               pins = "gpio55", "gpio56", "gpio53", "gpio54";
> +                               function = "qup10";
> +                       };
> +
> +                       qup_spi11_default: qup-spi11-default-state {
> +                               pins = "gpio31", "gpio32", "gpio33", "gpio34";
> +                               function = "qup11";
> +                       };
> +
> +                       qup_spi12_default: qup-spi12-default-state {
> +                               pins = "gpio49", "gpio50", "gpio51", "gpio52";
> +                               function = "qup12";
> +                       };
> +
> +                       qup_spi13_default: qup-spi13-default-state {
> +                               pins = "gpio105", "gpio106", "gpio107", "gpio108";
> +                               function = "qup13";
> +                       };
> +
> +                       qup_spi14_default: qup-spi14-default-state {
> +                               pins = "gpio33", "gpio34", "gpio31", "gpio32";
> +                               function = "qup14";
> +                       };
> +
> +                       qup_spi15_default: qup-spi15-default-state {
> +                               pins = "gpio81", "gpio82", "gpio83", "gpio84";
> +                               function = "qup15";
> +                       };
> +
> +                       qup_uart0_default: qup-uart0-default-state {
> +                               qup_uart0_tx: tx-pins {
> +                                       pins = "gpio2";
> +                                       function = "qup0";
> +                               };
> +
> +                               qup_uart0_rx: rx-pins {
> +                                       pins = "gpio3";
> +                                       function = "qup0";
> +                               };
> +                       };
> +
> +                       qup_uart1_default: qup-uart1-default-state {
> +                               qup_uart1_tx: tx-pins {
> +                                       pins = "gpio19";
> +                                       function = "qup1";
> +                               };
> +
> +                               qup_uart1_rx: rx-pins {
> +                                       pins = "gpio20";
> +                                       function = "qup1";
> +                               };
> +                       };
> +
> +                       qup_uart2_default: qup-uart2-default-state {
> +                               qup_uart2_tx: tx-pins {
> +                                       pins = "gpio29";
> +                                       function = "qup2";
> +                               };
> +
> +                               qup_uart2_rx: rx-pins {
> +                                       pins = "gpio30";
> +                                       function = "qup2";
> +                               };
> +                       };
> +
> +                       qup_uart3_default: qup-uart3-default-state {
> +                               qup_uart3_tx: tx-pins {
> +                                       pins = "gpio43";
> +                                       function = "qup3";
> +                               };
> +
> +                               qup_uart3_rx: rx-pins {
> +                                       pins = "gpio44";
> +                                       function = "qup3";
> +                               };
> +                       };
> +
> +                       qup_uart3_4pin: qup-uart3-4pin-state {
> +                               qup_uart3_4pin_cts: cts-pins {
> +                                       pins = "gpio41";
> +                                       function = "qup3";
> +                               };
> +
> +                               qup_uart3_4pin_rts_tx: rts-tx-pins {
> +                                       pins = "gpio42", "gpio43";
> +                                       function = "qup3";
> +                               };
> +
> +                               qup_uart3_4pin_rx: rx-pins {
> +                                       pins = "gpio44";
> +                                       function = "qup3";
> +                               };
> +                       };
> +
> +                       qup_uart4_default: qup-uart4-default-state {
> +                               qup_uart4_tx: tx-pins {
> +                                       pins = "gpio91";
> +                                       function = "qup4";
> +                               };
> +
> +                               qup_uart4_rx: rx-pins {
> +                                       pins = "gpio92";
> +                                       function = "qup4";
> +                               };
> +                       };
> +
> +                       qup_uart5_default: qup-uart5-default-state {
> +                               qup_uart5_tx: tx-pins {
> +                                       pins = "gpio87";
> +                                       function = "qup5";
> +                               };
> +
> +                               qup_uart5_rx: rx-pins {
> +                                       pins = "gpio88";
> +                                       function = "qup5";
> +                               };
> +                       };
> +
> +                       qup_uart6_default: qup-uart6-default-state {
> +                               qup_uart6_tx: tx-pins {
> +                                       pins = "gpio47";
> +                                       function = "qup6";
> +                               };
> +
> +                               qup_uart6_rx: rx-pins {
> +                                       pins = "gpio48";
> +                                       function = "qup6";
> +                               };
> +                       };
> +
> +                       qup_uart6_4pin: qup-uart6-4pin-state {
> +                               qup_uart6_4pin_cts: cts-pins {
> +                                       pins = "gpio45";
> +                                       function = "qup6";
> +                                       bias-pull-down;
> +                               };
> +
> +                               qup_uart6_4pin_rts_tx: rts-tx-pins {
> +                                       pins = "gpio46", "gpio47";
> +                                       function = "qup6";
> +                                       drive-strength = <2>;
> +                                       bias-disable;
> +                               };
> +
> +                               qup_uart6_4pin_rx: rx-pins {
> +                                       pins = "gpio48";
> +                                       function = "qup6";
> +                                       bias-pull-up;
> +                               };
> +                       };
> +
> +                       qup_uart7_default: qup-uart7-default-state {
> +                               qup_uart7_tx: tx-pins {
> +                                       pins = "gpio95";
> +                                       function = "qup7";
> +                               };
> +
> +                               qup_uart7_rx: rx-pins {
> +                                       pins = "gpio96";
> +                                       function = "qup7";
> +                               };
> +                       };
> +
> +                       qup_uart8_default: qup-uart8-default-state {
> +                               qup_uart8_tx: tx-pins {
> +                                       pins = "gpio67";
> +                                       function = "qup8";
> +                               };
> +
> +                               qup_uart8_rx: rx-pins {
> +                                       pins = "gpio68";
> +                                       function = "qup8";
> +                               };
> +                       };
> +
> +                       qup_uart9_default: qup-uart9-default-state {
> +                               qup_uart9_tx: tx-pins {
> +                                       pins = "gpio4";
> +                                       function = "qup9";
> +                               };
> +
> +                               qup_uart9_rx: rx-pins {
> +                                       pins = "gpio5";
> +                                       function = "qup9";
> +                               };
> +                       };
> +
> +                       qup_uart10_default: qup-uart10-default-state {
> +                               qup_uart10_tx: tx-pins {
> +                                       pins = "gpio53";
> +                                       function = "qup10";
> +                               };
> +
> +                               qup_uart10_rx: rx-pins {
> +                                       pins = "gpio54";
> +                                       function = "qup10";
> +                               };
> +                       };
> +
> +                       qup_uart11_default: qup-uart11-default-state {
> +                               qup_uart11_tx: tx-pins {
> +                                       pins = "gpio33";
> +                                       function = "qup11";
> +                               };
> +
> +                               qup_uart11_rx: rx-pins {
> +                                       pins = "gpio34";
> +                                       function = "qup11";
> +                               };
> +                       };
> +
> +                       qup_uart12_default: qup-uart12-default-state {
> +                               qup_uart12_tx: tx-pins {
> +                                       pins = "gpio51";
> +                                       function = "qup0";
> +                               };
> +
> +                               qup_uart12_rx: rx-pins {
> +                                       pins = "gpio52";
> +                                       function = "qup0";
> +                               };
> +                       };
> +
> +                       qup_uart13_default: qup-uart13-default-state {
> +                               qup_uart13_tx: tx-pins {
> +                                       pins = "gpio107";
> +                                       function = "qup13";
> +                               };
> +
> +                               qup_uart13_rx: rx-pins {
> +                                       pins = "gpio108";
> +                                       function = "qup13";
> +                               };
> +                       };
> +
> +                       qup_uart14_default: qup-uart14-default-state {
> +                               qup_uart14_tx: tx-pins {
> +                                       pins = "gpio31";
> +                                       function = "qup14";
> +                               };
> +
> +                               qup_uart14_rx: rx-pins {
> +                                       pins = "gpio32";
> +                                       function = "qup14";
> +                               };
> +                       };
> +
> +                       qup_uart15_default: qup-uart15-default-state {
> +                               qup_uart15_tx: tx-pins {
> +                                       pins = "gpio83";
> +                                       function = "qup15";
> +                               };
> +
> +                               qup_uart15_rx: rx-pins {
> +                                       pins = "gpio84";
> +                                       function = "qup15";
> +                               };
> +                       };
> +
> +                       quat_mi2s_sleep: quat-mi2s-sleep-state {
> +                               pins = "gpio58", "gpio59";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-pull-down;
> +                       };
> +
> +                       quat_mi2s_active: quat-mi2s-active-state {
> +                               pins = "gpio58", "gpio59";
> +                               function = "qua_mi2s";
> +                               drive-strength = <8>;
> +                               bias-disable;
> +                               output-high;
> +                       };
> +
> +                       quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
> +                               pins = "gpio60";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-pull-down;
> +                       };
> +
> +                       quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
> +                               pins = "gpio60";
> +                               function = "qua_mi2s";
> +                               drive-strength = <8>;
> +                               bias-disable;
> +                       };
> +
> +                       quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
> +                               pins = "gpio61";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-pull-down;
> +                       };
> +
> +                       quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
> +                               pins = "gpio61";
> +                               function = "qua_mi2s";
> +                               drive-strength = <8>;
> +                               bias-disable;
> +                       };
> +
> +                       quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
> +                               pins = "gpio62";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-pull-down;
> +                       };
> +
> +                       quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
> +                               pins = "gpio62";
> +                               function = "qua_mi2s";
> +                               drive-strength = <8>;
> +                               bias-disable;
> +                       };
> +
> +                       quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
> +                               pins = "gpio63";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-pull-down;
> +                       };
> +
> +                       quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
> +                               pins = "gpio63";
> +                               function = "qua_mi2s";
> +                               drive-strength = <8>;
> +                               bias-disable;
> +                       };
> +               };
> +
> +               mss_pil: remoteproc at 4080000 {
> +                       compatible = "qcom,sdm845-mss-pil";
> +                       reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
> +                       reg-names = "qdsp6", "rmb";
> +
> +                       interrupts-extended =
> +                               <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> +                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +                               <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "wdog", "fatal", "ready",
> +                                         "handover", "stop-ack",
> +                                         "shutdown-ack";
> +
> +                       clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> +                                <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> +                                <&gcc GCC_BOOT_ROM_AHB_CLK>,
> +                                <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
> +                                <&gcc GCC_MSS_SNOC_AXI_CLK>,
> +                                <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> +                                <&gcc GCC_PRNG_AHB_CLK>,
> +                                <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "iface", "bus", "mem", "gpll0_mss",
> +                                     "snoc_axi", "mnoc_axi", "prng", "xo";
> +
> +                       qcom,qmp = <&aoss_qmp>;
> +
> +                       qcom,smem-states = <&modem_smp2p_out 0>;
> +                       qcom,smem-state-names = "stop";
> +
> +                       resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> +                                <&pdc_reset PDC_MODEM_SYNC_RESET>;
> +                       reset-names = "mss_restart", "pdc_reset";
> +
> +                       qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
> +
> +                       power-domains = <&rpmhpd SDM845_CX>,
> +                                       <&rpmhpd SDM845_MX>,
> +                                       <&rpmhpd SDM845_MSS>;
> +                       power-domain-names = "cx", "mx", "mss";
> +
> +                       status = "disabled";
> +
> +                       mba {
> +                               memory-region = <&mba_region>;
> +                       };
> +
> +                       mpss {
> +                               memory-region = <&mpss_region>;
> +                       };
> +
> +                       metadata {
> +                               memory-region = <&mdata_mem>;
> +                       };
> +
> +                       glink-edge {
> +                               interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> +                               label = "modem";
> +                               qcom,remote-pid = <1>;
> +                               mboxes = <&apss_shared 12>;
> +                       };
> +               };
> +
> +               gpucc: clock-controller at 5090000 {
> +                       compatible = "qcom,sdm845-gpucc";
> +                       reg = <0 0x05090000 0 0x9000>;
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> +                                <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> +                       clock-names = "bi_tcxo",
> +                                     "gcc_gpu_gpll0_clk_src",
> +                                     "gcc_gpu_gpll0_div_clk_src";
> +               };
> +
> +               slpi_pas: remoteproc at 5c00000 {
> +                       compatible = "qcom,sdm845-slpi-pas";
> +                       reg = <0 0x5c00000 0 0x4000>;
> +
> +                       interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
> +                                               <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                                               <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                                               <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                                               <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "wdog", "fatal", "ready",
> +                                               "handover", "stop-ack";
> +
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "xo";
> +
> +                       qcom,qmp = <&aoss_qmp>;
> +
> +                       power-domains = <&rpmhpd SDM845_CX>,
> +                                       <&rpmhpd SDM845_MX>;
> +                       power-domain-names = "lcx", "lmx";
> +
> +                       memory-region = <&slpi_mem>;
> +
> +                       qcom,smem-states = <&slpi_smp2p_out 0>;
> +                       qcom,smem-state-names = "stop";
> +
> +                       status = "disabled";
> +
> +                       glink-edge {
> +                               interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
> +                               label = "dsps";
> +                               qcom,remote-pid = <3>;
> +                               mboxes = <&apss_shared 24>;
> +
> +                               fastrpc {
> +                                       compatible = "qcom,fastrpc";
> +                                       qcom,glink-channels = "fastrpcglink-apps-dsp";
> +                                       label = "sdsp";
> +                                       qcom,non-secure-domain;
> +                                       qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
> +                                                     QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
> +                                       memory-region = <&fastrpc_mem>;
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       compute-cb at 0 {
> +                                               compatible = "qcom,fastrpc-compute-cb";
> +                                               reg = <0>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               stm at 6002000 {
> +                       compatible = "arm,coresight-stm", "arm,primecell";
> +                       reg = <0 0x06002000 0 0x1000>,
> +                             <0 0x16280000 0 0x180000>;
> +                       reg-names = "stm-base", "stm-stimulus-base";
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       stm_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&funnel0_in7>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at 6041000 {
> +                       compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +                       reg = <0 0x06041000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       funnel0_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&merge_funnel_in0>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 7 {
> +                                       reg = <7>;
> +                                       funnel0_in7: endpoint {
> +                                               remote-endpoint = <&stm_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at 6043000 {
> +                       compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +                       reg = <0 0x06043000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       funnel2_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&merge_funnel_in2>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 5 {
> +                                       reg = <5>;
> +                                       funnel2_in5: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_merge_funnel_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at 6045000 {
> +                       compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +                       reg = <0 0x06045000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       merge_funnel_out: endpoint {
> +                                               remote-endpoint = <&etf_in>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 0 {
> +                                       reg = <0>;
> +                                       merge_funnel_in0: endpoint {
> +                                               remote-endpoint =
> +                                                 <&funnel0_out>;
> +                                       };
> +                               };
> +
> +                               port at 2 {
> +                                       reg = <2>;
> +                                       merge_funnel_in2: endpoint {
> +                                               remote-endpoint =
> +                                                 <&funnel2_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               replicator at 6046000 {
> +                       compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
> +                       reg = <0 0x06046000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       replicator_out: endpoint {
> +                                               remote-endpoint = <&etr_in>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               port {
> +                                       replicator_in: endpoint {
> +                                               remote-endpoint = <&etf_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etf at 6047000 {
> +                       compatible = "arm,coresight-tmc", "arm,primecell";
> +                       reg = <0 0x06047000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       etf_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&replicator_in>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 1 {
> +                                       reg = <1>;
> +                                       etf_in: endpoint {
> +                                               remote-endpoint =
> +                                                 <&merge_funnel_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etr at 6048000 {
> +                       compatible = "arm,coresight-tmc", "arm,primecell";
> +                       reg = <0 0x06048000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,scatter-gather;
> +
> +                       in-ports {
> +                               port {
> +                                       etr_in: endpoint {
> +                                               remote-endpoint =
> +                                                 <&replicator_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7040000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07040000 0 0x1000>;
> +
> +                       cpu = <&CPU0>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm0_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in0>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7140000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07140000 0 0x1000>;
> +
> +                       cpu = <&CPU1>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm1_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in1>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7240000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07240000 0 0x1000>;
> +
> +                       cpu = <&CPU2>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm2_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in2>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7340000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07340000 0 0x1000>;
> +
> +                       cpu = <&CPU3>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm3_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in3>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7440000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07440000 0 0x1000>;
> +
> +                       cpu = <&CPU4>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm4_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in4>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7540000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07540000 0 0x1000>;
> +
> +                       cpu = <&CPU5>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm5_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in5>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7640000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07640000 0 0x1000>;
> +
> +                       cpu = <&CPU6>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm6_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in6>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               etm at 7740000 {
> +                       compatible = "arm,coresight-etm4x", "arm,primecell";
> +                       reg = <0 0x07740000 0 0x1000>;
> +
> +                       cpu = <&CPU7>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +                       arm,coresight-loses-context-with-cpu;
> +
> +                       out-ports {
> +                               port {
> +                                       etm7_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_in7>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at 7800000 { /* APSS Funnel */
> +                       compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +                       reg = <0 0x07800000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       apss_funnel_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_merge_funnel_in>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 0 {
> +                                       reg = <0>;
> +                                       apss_funnel_in0: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm0_out>;
> +                                       };
> +                               };
> +
> +                               port at 1 {
> +                                       reg = <1>;
> +                                       apss_funnel_in1: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm1_out>;
> +                                       };
> +                               };
> +
> +                               port at 2 {
> +                                       reg = <2>;
> +                                       apss_funnel_in2: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm2_out>;
> +                                       };
> +                               };
> +
> +                               port at 3 {
> +                                       reg = <3>;
> +                                       apss_funnel_in3: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm3_out>;
> +                                       };
> +                               };
> +
> +                               port at 4 {
> +                                       reg = <4>;
> +                                       apss_funnel_in4: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm4_out>;
> +                                       };
> +                               };
> +
> +                               port at 5 {
> +                                       reg = <5>;
> +                                       apss_funnel_in5: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm5_out>;
> +                                       };
> +                               };
> +
> +                               port at 6 {
> +                                       reg = <6>;
> +                                       apss_funnel_in6: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm6_out>;
> +                                       };
> +                               };
> +
> +                               port at 7 {
> +                                       reg = <7>;
> +                                       apss_funnel_in7: endpoint {
> +                                               remote-endpoint =
> +                                                 <&etm7_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at 7810000 {
> +                       compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +                       reg = <0 0x07810000 0 0x1000>;
> +
> +                       clocks = <&aoss_qmp>;
> +                       clock-names = "apb_pclk";
> +
> +                       out-ports {
> +                               port {
> +                                       apss_merge_funnel_out: endpoint {
> +                                               remote-endpoint =
> +                                                 <&funnel2_in5>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               port {
> +                                       apss_merge_funnel_in: endpoint {
> +                                               remote-endpoint =
> +                                                 <&apss_funnel_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               sdhc_2: mmc at 8804000 {
> +                       compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
> +                       reg = <0 0x08804000 0 0x1000>;
> +
> +                       interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hc_irq", "pwr_irq";
> +
> +                       clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +                                <&gcc GCC_SDCC2_APPS_CLK>,
> +                                <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "iface", "core", "xo";
> +                       iommus = <&apps_smmu 0xa0 0xf>;
> +                       power-domains = <&rpmhpd SDM845_CX>;
> +                       operating-points-v2 = <&sdhc2_opp_table>;
> +
> +                       status = "disabled";
> +
> +                       sdhc2_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-9600000 {
> +                                       opp-hz = /bits/ 64 <9600000>;
> +                                       required-opps = <&rpmhpd_opp_min_svs>;
> +                               };
> +
> +                               opp-19200000 {
> +                                       opp-hz = /bits/ 64 <19200000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-100000000 {
> +                                       opp-hz = /bits/ 64 <100000000>;
> +                                       required-opps = <&rpmhpd_opp_svs>;
> +                               };
> +
> +                               opp-201500000 {
> +                                       opp-hz = /bits/ 64 <201500000>;
> +                                       required-opps = <&rpmhpd_opp_svs_l1>;
> +                               };
> +                       };
> +               };
> +
> +               qspi: spi at 88df000 {
> +                       compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
> +                       reg = <0 0x088df000 0 0x600>;
> +                       iommus = <&apps_smmu 0x160 0x0>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> +                                <&gcc GCC_QSPI_CORE_CLK>;
> +                       clock-names = "iface", "core";
> +                       power-domains = <&rpmhpd SDM845_CX>;
> +                       operating-points-v2 = <&qspi_opp_table>;
> +                       status = "disabled";
> +               };
> +
> +               slim: slim-ngd at 171c0000 {
> +                       compatible = "qcom,slim-ngd-v2.1.0";
> +                       reg = <0 0x171c0000 0 0x2c000>;
> +                       interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                       dmas = <&slimbam 3>, <&slimbam 4>;
> +                       dma-names = "rx", "tx";
> +
> +                       iommus = <&apps_smmu 0x1806 0x0>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       status = "disabled";
> +               };
> +
> +               lmh_cluster1: lmh at 17d70800 {
> +                       compatible = "qcom,sdm845-lmh";
> +                       reg = <0 0x17d70800 0 0x400>;
> +                       interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +                       cpus = <&CPU4>;
> +                       qcom,lmh-temp-arm-millicelsius = <65000>;
> +                       qcom,lmh-temp-low-millicelsius = <94500>;
> +                       qcom,lmh-temp-high-millicelsius = <95000>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <1>;
> +               };
> +
> +               lmh_cluster0: lmh at 17d78800 {
> +                       compatible = "qcom,sdm845-lmh";
> +                       reg = <0 0x17d78800 0 0x400>;
> +                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +                       cpus = <&CPU0>;
> +                       qcom,lmh-temp-arm-millicelsius = <65000>;
> +                       qcom,lmh-temp-low-millicelsius = <94500>;
> +                       qcom,lmh-temp-high-millicelsius = <95000>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <1>;
> +               };
> +
> +               usb_1_hsphy: phy at 88e2000 {
> +                       compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
> +                       reg = <0 0x088e2000 0 0x400>;
> +                       status = "disabled";
> +                       #phy-cells = <0>;
> +
> +                       clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                                <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "cfg_ahb", "ref";
> +
> +                       resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +
> +                       nvmem-cells = <&qusb2p_hstx_trim>;
> +               };
> +
> +               usb_2_hsphy: phy at 88e3000 {
> +                       compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
> +                       reg = <0 0x088e3000 0 0x400>;
> +                       status = "disabled";
> +                       #phy-cells = <0>;
> +
> +                       clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                                <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "cfg_ahb", "ref";
> +
> +                       resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> +
> +                       nvmem-cells = <&qusb2s_hstx_trim>;
> +               };
> +
> +               usb_1_qmpphy: phy at 88e8000 {
> +                       compatible = "qcom,sdm845-qmp-usb3-dp-phy";
> +                       reg = <0 0x088e8000 0 0x3000>;
> +                       status = "disabled";
> +
> +                       clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> +                                <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +                                <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +                                <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
> +                       clock-names = "aux",
> +                                     "ref",
> +                                     "com_aux",
> +                                     "usb3_pipe",
> +                                     "cfg_ahb";
> +
> +                       resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +                                <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> +                       reset-names = "phy", "common";
> +
> +                       #clock-cells = <1>;
> +                       #phy-cells = <1>;
> +               };
> +
> +               usb_2_qmpphy: phy at 88eb000 {
> +                       compatible = "qcom,sdm845-qmp-usb3-uni-phy";
> +                       reg = <0 0x088eb000 0 0x18c>;
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +
> +                       clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
> +                                <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                                <&gcc GCC_USB3_SEC_CLKREF_CLK>,
> +                                <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
> +                       clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +
> +                       resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
> +                                <&gcc GCC_USB3_PHY_SEC_BCR>;
> +                       reset-names = "phy", "common";
> +
> +                       usb_2_ssphy: phy at 88eb200 {
> +                               reg = <0 0x088eb200 0 0x128>,
> +                                     <0 0x088eb400 0 0x1fc>,
> +                                     <0 0x088eb800 0 0x218>,
> +                                     <0 0x088eb600 0 0x70>;
> +                               #clock-cells = <0>;
> +                               #phy-cells = <0>;
> +                               clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
> +                               clock-names = "pipe0";
> +                               clock-output-names = "usb3_uni_phy_pipe_clk_src";
> +                       };
> +               };
> +
> +               usb_1: usb at a6f8800 {
> +                       compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
> +                       reg = <0 0x0a6f8800 0 0x400>;
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       dma-ranges;
> +
> +                       clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +                                <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +                                <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> +                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
> +                       clock-names = "cfg_noc",
> +                                     "core",
> +                                     "iface",
> +                                     "sleep",
> +                                     "mock_utmi";
> +
> +                       assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +                                         <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +                       assigned-clock-rates = <19200000>, <150000000>;
> +
> +                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hs_phy_irq", "ss_phy_irq",
> +                                         "dm_hs_phy_irq", "dp_hs_phy_irq";
> +
> +                       power-domains = <&gcc USB30_PRIM_GDSC>;
> +
> +                       resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> +                       interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
> +                       interconnect-names = "usb-ddr", "apps-usb";
> +
> +                       usb_1_dwc3: usb at a600000 {
> +                               compatible = "snps,dwc3";
> +                               reg = <0 0x0a600000 0 0xcd00>;
> +                               interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +                               iommus = <&apps_smmu 0x740 0>;
> +                               snps,dis_u2_susphy_quirk;
> +                               snps,dis_enblslpm_quirk;
> +                               phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
> +                               phy-names = "usb2-phy", "usb3-phy";
> +                       };
> +               };
> +
> +               usb_2: usb at a8f8800 {
> +                       compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
> +                       reg = <0 0x0a8f8800 0 0x400>;
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       dma-ranges;
> +
> +                       clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
> +                                <&gcc GCC_USB30_SEC_MASTER_CLK>,
> +                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
> +                                <&gcc GCC_USB30_SEC_SLEEP_CLK>,
> +                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
> +                       clock-names = "cfg_noc",
> +                                     "core",
> +                                     "iface",
> +                                     "sleep",
> +                                     "mock_utmi";
> +
> +                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> +                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
> +                       assigned-clock-rates = <19200000>, <150000000>;
> +
> +                       interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hs_phy_irq", "ss_phy_irq",
> +                                         "dm_hs_phy_irq", "dp_hs_phy_irq";
> +
> +                       power-domains = <&gcc USB30_SEC_GDSC>;
> +
> +                       resets = <&gcc GCC_USB30_SEC_BCR>;
> +
> +                       interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
> +                       interconnect-names = "usb-ddr", "apps-usb";
> +
> +                       usb_2_dwc3: usb at a800000 {
> +                               compatible = "snps,dwc3";
> +                               reg = <0 0x0a800000 0 0xcd00>;
> +                               interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +                               iommus = <&apps_smmu 0x760 0>;
> +                               snps,dis_u2_susphy_quirk;
> +                               snps,dis_enblslpm_quirk;
> +                               phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
> +                               phy-names = "usb2-phy", "usb3-phy";
> +                       };
> +               };
> +
> +               venus: video-codec at aa00000 {
> +                       compatible = "qcom,sdm845-venus-v2";
> +                       reg = <0 0x0aa00000 0 0xff000>;
> +                       interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +                       power-domains = <&videocc VENUS_GDSC>,
> +                                       <&videocc VCODEC0_GDSC>,
> +                                       <&videocc VCODEC1_GDSC>,
> +                                       <&rpmhpd SDM845_CX>;
> +                       power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
> +                       operating-points-v2 = <&venus_opp_table>;
> +                       clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> +                                <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> +                                <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> +                                <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
> +                                <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
> +                                <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
> +                                <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
> +                       clock-names = "core", "iface", "bus",
> +                                     "vcodec0_core", "vcodec0_bus",
> +                                     "vcodec1_core", "vcodec1_bus";
> +                       iommus = <&apps_smmu 0x10a0 0x8>,
> +                                <&apps_smmu 0x10b0 0x0>;
> +                       memory-region = <&venus_mem>;
> +                       interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
> +                       interconnect-names = "video-mem", "cpu-cfg";
> +
> +                       status = "disabled";
> +
> +                       video-core0 {
> +                               compatible = "venus-decoder";
> +                       };
> +
> +                       video-core1 {
> +                               compatible = "venus-encoder";
> +                       };
> +
> +                       venus_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-100000000 {
> +                                       opp-hz = /bits/ 64 <100000000>;
> +                                       required-opps = <&rpmhpd_opp_min_svs>;
> +                               };
> +
> +                               opp-200000000 {
> +                                       opp-hz = /bits/ 64 <200000000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-320000000 {
> +                                       opp-hz = /bits/ 64 <320000000>;
> +                                       required-opps = <&rpmhpd_opp_svs>;
> +                               };
> +
> +                               opp-380000000 {
> +                                       opp-hz = /bits/ 64 <380000000>;
> +                                       required-opps = <&rpmhpd_opp_svs_l1>;
> +                               };
> +
> +                               opp-444000000 {
> +                                       opp-hz = /bits/ 64 <444000000>;
> +                                       required-opps = <&rpmhpd_opp_nom>;
> +                               };
> +
> +                               opp-533000097 {
> +                                       opp-hz = /bits/ 64 <533000097>;
> +                                       required-opps = <&rpmhpd_opp_turbo>;
> +                               };
> +                       };
> +               };
> +
> +               videocc: clock-controller at ab00000 {
> +                       compatible = "qcom,sdm845-videocc";
> +                       reg = <0 0x0ab00000 0 0x10000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "bi_tcxo";
> +                       #clock-cells = <1>;
> +                       #power-domain-cells = <1>;
> +                       #reset-cells = <1>;
> +               };
> +
> +               camss: camss at acb3000 {
> +                       compatible = "qcom,sdm845-camss";
> +
> +                       reg = <0 0x0acb3000 0 0x1000>,
> +                               <0 0x0acba000 0 0x1000>,
> +                               <0 0x0acc8000 0 0x1000>,
> +                               <0 0x0ac65000 0 0x1000>,
> +                               <0 0x0ac66000 0 0x1000>,
> +                               <0 0x0ac67000 0 0x1000>,
> +                               <0 0x0ac68000 0 0x1000>,
> +                               <0 0x0acaf000 0 0x4000>,
> +                               <0 0x0acb6000 0 0x4000>,
> +                               <0 0x0acc4000 0 0x4000>;
> +                       reg-names = "csid0",
> +                               "csid1",
> +                               "csid2",
> +                               "csiphy0",
> +                               "csiphy1",
> +                               "csiphy2",
> +                               "csiphy3",
> +                               "vfe0",
> +                               "vfe1",
> +                               "vfe_lite";
> +
> +                       interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "csid0",
> +                               "csid1",
> +                               "csid2",
> +                               "csiphy0",
> +                               "csiphy1",
> +                               "csiphy2",
> +                               "csiphy3",
> +                               "vfe0",
> +                               "vfe1",
> +                               "vfe_lite";
> +
> +                       power-domains = <&clock_camcc IFE_0_GDSC>,
> +                               <&clock_camcc IFE_1_GDSC>,
> +                               <&clock_camcc TITAN_TOP_GDSC>;
> +
> +                       clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
> +                               <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_CSIPHY0_CLK>,
> +                               <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
> +                               <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_CSIPHY1_CLK>,
> +                               <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
> +                               <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_CSIPHY2_CLK>,
> +                               <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
> +                               <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_CSIPHY3_CLK>,
> +                               <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
> +                               <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
> +                               <&gcc GCC_CAMERA_AHB_CLK>,
> +                               <&gcc GCC_CAMERA_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_SOC_AHB_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_0_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_1_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_IFE_LITE_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> +                               <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
> +                       clock-names = "camnoc_axi",
> +                               "cpas_ahb",
> +                               "cphy_rx_src",
> +                               "csi0",
> +                               "csi0_src",
> +                               "csi1",
> +                               "csi1_src",
> +                               "csi2",
> +                               "csi2_src",
> +                               "csiphy0",
> +                               "csiphy0_timer",
> +                               "csiphy0_timer_src",
> +                               "csiphy1",
> +                               "csiphy1_timer",
> +                               "csiphy1_timer_src",
> +                               "csiphy2",
> +                               "csiphy2_timer",
> +                               "csiphy2_timer_src",
> +                               "csiphy3",
> +                               "csiphy3_timer",
> +                               "csiphy3_timer_src",
> +                               "gcc_camera_ahb",
> +                               "gcc_camera_axi",
> +                               "slow_ahb_src",
> +                               "soc_ahb",
> +                               "vfe0_axi",
> +                               "vfe0",
> +                               "vfe0_cphy_rx",
> +                               "vfe0_src",
> +                               "vfe1_axi",
> +                               "vfe1",
> +                               "vfe1_cphy_rx",
> +                               "vfe1_src",
> +                               "vfe_lite",
> +                               "vfe_lite_cphy_rx",
> +                               "vfe_lite_src";
> +
> +                       iommus = <&apps_smmu 0x0808 0x0>,
> +                                <&apps_smmu 0x0810 0x8>,
> +                                <&apps_smmu 0x0c08 0x0>,
> +                                <&apps_smmu 0x0c10 0x8>;
> +
> +                       status = "disabled";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 0 {
> +                                       reg = <0>;
> +                               };
> +
> +                               port at 1 {
> +                                       reg = <1>;
> +                               };
> +
> +                               port at 2 {
> +                                       reg = <2>;
> +                               };
> +
> +                               port at 3 {
> +                                       reg = <3>;
> +                               };
> +                       };
> +               };
> +
> +               cci: cci at ac4a000 {
> +                       compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       reg = <0 0x0ac4a000 0 0x4000>;
> +                       interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
> +                       power-domains = <&clock_camcc TITAN_TOP_GDSC>;
> +
> +                       clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_SOC_AHB_CLK>,
> +                               <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> +                               <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
> +                               <&clock_camcc CAM_CC_CCI_CLK>,
> +                               <&clock_camcc CAM_CC_CCI_CLK_SRC>;
> +                       clock-names = "camnoc_axi",
> +                               "soc_ahb",
> +                               "slow_ahb_src",
> +                               "cpas_ahb",
> +                               "cci",
> +                               "cci_src";
> +
> +                       assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> +                               <&clock_camcc CAM_CC_CCI_CLK>;
> +                       assigned-clock-rates = <80000000>, <37500000>;
> +
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&cci0_default &cci1_default>;
> +                       pinctrl-1 = <&cci0_sleep &cci1_sleep>;
> +
> +                       status = "disabled";
> +
> +                       cci_i2c0: i2c-bus at 0 {
> +                               reg = <0>;
> +                               clock-frequency = <1000000>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       cci_i2c1: i2c-bus at 1 {
> +                               reg = <1>;
> +                               clock-frequency = <1000000>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +
> +               clock_camcc: clock-controller at ad00000 {
> +                       compatible = "qcom,sdm845-camcc";
> +                       reg = <0 0x0ad00000 0 0x10000>;
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "bi_tcxo";
> +               };
> +
> +               mdss: display-subsystem at ae00000 {
> +                       compatible = "qcom,sdm845-mdss";
> +                       reg = <0 0x0ae00000 0 0x1000>;
> +                       reg-names = "mdss";
> +
> +                       power-domains = <&dispcc MDSS_GDSC>;
> +
> +                       clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +                       clock-names = "iface", "core";
> +
> +                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <1>;
> +
> +                       interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
> +                                       <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
> +                       interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +                       iommus = <&apps_smmu 0x880 0x8>,
> +                                <&apps_smmu 0xc80 0x8>;
> +
> +                       status = "disabled";
> +
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +
> +                       mdss_mdp: display-controller at ae01000 {
> +                               compatible = "qcom,sdm845-dpu";
> +                               reg = <0 0x0ae01000 0 0x8f000>,
> +                                     <0 0x0aeb0000 0 0x2008>;
> +                               reg-names = "mdp", "vbif";
> +
> +                               clocks = <&gcc GCC_DISP_AXI_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AXI_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +                               clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
> +
> +                               assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +                               assigned-clock-rates = <19200000>;
> +                               operating-points-v2 = <&mdp_opp_table>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +
> +                               interrupt-parent = <&mdss>;
> +                               interrupts = <0>;
> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       port at 0 {
> +                                               reg = <0>;
> +                                               dpu_intf0_out: endpoint {
> +                                                       remote-endpoint = <&dp_in>;
> +                                               };
> +                                       };
> +
> +                                       port at 1 {
> +                                               reg = <1>;
> +                                               dpu_intf1_out: endpoint {
> +                                                       remote-endpoint = <&mdss_dsi0_in>;
> +                                               };
> +                                       };
> +
> +                                       port at 2 {
> +                                               reg = <2>;
> +                                               dpu_intf2_out: endpoint {
> +                                                       remote-endpoint = <&mdss_dsi1_in>;
> +                                               };
> +                                       };
> +                               };
> +
> +                               mdp_opp_table: opp-table {
> +                                       compatible = "operating-points-v2";
> +
> +                                       opp-19200000 {
> +                                               opp-hz = /bits/ 64 <19200000>;
> +                                               required-opps = <&rpmhpd_opp_min_svs>;
> +                                       };
> +
> +                                       opp-171428571 {
> +                                               opp-hz = /bits/ 64 <171428571>;
> +                                               required-opps = <&rpmhpd_opp_low_svs>;
> +                                       };
> +
> +                                       opp-344000000 {
> +                                               opp-hz = /bits/ 64 <344000000>;
> +                                               required-opps = <&rpmhpd_opp_svs_l1>;
> +                                       };
> +
> +                                       opp-430000000 {
> +                                               opp-hz = /bits/ 64 <430000000>;
> +                                               required-opps = <&rpmhpd_opp_nom>;
> +                                       };
> +                               };
> +                       };
> +
> +                       mdss_dp: displayport-controller at ae90000 {
> +                               status = "disabled";
> +                               compatible = "qcom,sdm845-dp";
> +
> +                               reg = <0 0x0ae90000 0 0x200>,
> +                                     <0 0x0ae90200 0 0x200>,
> +                                     <0 0x0ae90400 0 0x600>,
> +                                     <0 0x0ae90a00 0 0x600>,
> +                                     <0 0x0ae91000 0 0x600>;
> +
> +                               interrupt-parent = <&mdss>;
> +                               interrupts = <12>;
> +
> +                               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
> +                               clock-names = "core_iface", "core_aux", "ctrl_link",
> +                                             "ctrl_link_iface", "stream_pixel";
> +                               assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
> +                                                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +                               assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +                                                        <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> +                               phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
> +                               phy-names = "dp";
> +
> +                               operating-points-v2 = <&dp_opp_table>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +                                       port at 0 {
> +                                               reg = <0>;
> +                                               dp_in: endpoint {
> +                                                       remote-endpoint = <&dpu_intf0_out>;
> +                                               };
> +                                       };
> +
> +                                       port at 1 {
> +                                               reg = <1>;
> +                                               dp_out: endpoint { };
> +                                       };
> +                               };
> +
> +                               dp_opp_table: opp-table {
> +                                       compatible = "operating-points-v2";
> +
> +                                       opp-162000000 {
> +                                               opp-hz = /bits/ 64 <162000000>;
> +                                               required-opps = <&rpmhpd_opp_low_svs>;
> +                                       };
> +
> +                                       opp-270000000 {
> +                                               opp-hz = /bits/ 64 <270000000>;
> +                                               required-opps = <&rpmhpd_opp_svs>;
> +                                       };
> +
> +                                       opp-540000000 {
> +                                               opp-hz = /bits/ 64 <540000000>;
> +                                               required-opps = <&rpmhpd_opp_svs_l1>;
> +                                       };
> +
> +                                       opp-810000000 {
> +                                               opp-hz = /bits/ 64 <810000000>;
> +                                               required-opps = <&rpmhpd_opp_nom>;
> +                                       };
> +                               };
> +                       };
> +
> +                       mdss_dsi0: dsi at ae94000 {
> +                               compatible = "qcom,sdm845-dsi-ctrl",
> +                                            "qcom,mdss-dsi-ctrl";
> +                               reg = <0 0x0ae94000 0 0x400>;
> +                               reg-names = "dsi_ctrl";
> +
> +                               interrupt-parent = <&mdss>;
> +                               interrupts = <4>;
> +
> +                               clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AXI_CLK>;
> +                               clock-names = "byte",
> +                                             "byte_intf",
> +                                             "pixel",
> +                                             "core",
> +                                             "iface",
> +                                             "bus";
> +                               assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +                               assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
> +
> +                               operating-points-v2 = <&dsi_opp_table>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +
> +                               phys = <&mdss_dsi0_phy>;
> +
> +                               status = "disabled";
> +
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       port at 0 {
> +                                               reg = <0>;
> +                                               mdss_dsi0_in: endpoint {
> +                                                       remote-endpoint = <&dpu_intf1_out>;
> +                                               };
> +                                       };
> +
> +                                       port at 1 {
> +                                               reg = <1>;
> +                                               mdss_dsi0_out: endpoint {
> +                                               };
> +                                       };
> +                               };
> +                       };
> +
> +                       mdss_dsi0_phy: phy at ae94400 {
> +                               compatible = "qcom,dsi-phy-10nm";
> +                               reg = <0 0x0ae94400 0 0x200>,
> +                                     <0 0x0ae94600 0 0x280>,
> +                                     <0 0x0ae94a00 0 0x1e0>;
> +                               reg-names = "dsi_phy",
> +                                           "dsi_phy_lane",
> +                                           "dsi_pll";
> +
> +                               #clock-cells = <1>;
> +                               #phy-cells = <0>;
> +
> +                               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&rpmhcc RPMH_CXO_CLK>;
> +                               clock-names = "iface", "ref";
> +
> +                               status = "disabled";
> +                       };
> +
> +                       mdss_dsi1: dsi at ae96000 {
> +                               compatible = "qcom,sdm845-dsi-ctrl",
> +                                            "qcom,mdss-dsi-ctrl";
> +                               reg = <0 0x0ae96000 0 0x400>;
> +                               reg-names = "dsi_ctrl";
> +
> +                               interrupt-parent = <&mdss>;
> +                               interrupts = <5>;
> +
> +                               clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&dispcc DISP_CC_MDSS_AXI_CLK>;
> +                               clock-names = "byte",
> +                                             "byte_intf",
> +                                             "pixel",
> +                                             "core",
> +                                             "iface",
> +                                             "bus";
> +                               assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> +                               assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
> +
> +                               operating-points-v2 = <&dsi_opp_table>;
> +                               power-domains = <&rpmhpd SDM845_CX>;
> +
> +                               phys = <&mdss_dsi1_phy>;
> +
> +                               status = "disabled";
> +
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       port at 0 {
> +                                               reg = <0>;
> +                                               mdss_dsi1_in: endpoint {
> +                                                       remote-endpoint = <&dpu_intf2_out>;
> +                                               };
> +                                       };
> +
> +                                       port at 1 {
> +                                               reg = <1>;
> +                                               mdss_dsi1_out: endpoint {
> +                                               };
> +                                       };
> +                               };
> +                       };
> +
> +                       mdss_dsi1_phy: phy at ae96400 {
> +                               compatible = "qcom,dsi-phy-10nm";
> +                               reg = <0 0x0ae96400 0 0x200>,
> +                                     <0 0x0ae96600 0 0x280>,
> +                                     <0 0x0ae96a00 0 0x10e>;
> +                               reg-names = "dsi_phy",
> +                                           "dsi_phy_lane",
> +                                           "dsi_pll";
> +
> +                               #clock-cells = <1>;
> +                               #phy-cells = <0>;
> +
> +                               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                                        <&rpmhcc RPMH_CXO_CLK>;
> +                               clock-names = "iface", "ref";
> +
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               gpu: gpu at 5000000 {
> +                       compatible = "qcom,adreno-630.2", "qcom,adreno";
> +
> +                       reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
> +                       reg-names = "kgsl_3d0_reg_memory", "cx_mem";
> +
> +                       /*
> +                        * Look ma, no clocks! The GPU clocks and power are
> +                        * controlled entirely by the GMU
> +                        */
> +
> +                       interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                       iommus = <&adreno_smmu 0>;
> +
> +                       operating-points-v2 = <&gpu_opp_table>;
> +
> +                       qcom,gmu = <&gmu>;
> +
> +                       interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
> +                       interconnect-names = "gfx-mem";
> +
> +                       status = "disabled";
> +
> +                       gpu_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-710000000 {
> +                                       opp-hz = /bits/ 64 <710000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +                                       opp-peak-kBps = <7216000>;
> +                               };
> +
> +                               opp-675000000 {
> +                                       opp-hz = /bits/ 64 <675000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +                                       opp-peak-kBps = <7216000>;
> +                               };
> +
> +                               opp-596000000 {
> +                                       opp-hz = /bits/ 64 <596000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +                                       opp-peak-kBps = <6220000>;
> +                               };
> +
> +                               opp-520000000 {
> +                                       opp-hz = /bits/ 64 <520000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +                                       opp-peak-kBps = <6220000>;
> +                               };
> +
> +                               opp-414000000 {
> +                                       opp-hz = /bits/ 64 <414000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +                                       opp-peak-kBps = <4068000>;
> +                               };
> +
> +                               opp-342000000 {
> +                                       opp-hz = /bits/ 64 <342000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +                                       opp-peak-kBps = <2724000>;
> +                               };
> +
> +                               opp-257000000 {
> +                                       opp-hz = /bits/ 64 <257000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +                                       opp-peak-kBps = <1648000>;
> +                               };
> +                       };
> +               };
> +
> +               adreno_smmu: iommu at 5040000 {
> +                       compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
> +                       reg = <0 0x05040000 0 0x10000>;
> +                       #iommu-cells = <1>;
> +                       #global-interrupts = <2>;
> +                       interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
> +                                    <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
> +                       clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> +                                <&gcc GCC_GPU_CFG_AHB_CLK>;
> +                       clock-names = "bus", "iface";
> +
> +                       power-domains = <&gpucc GPU_CX_GDSC>;
> +               };
> +
> +               gmu: gmu at 506a000 {
> +                       compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +
> +                       reg = <0 0x0506a000 0 0x30000>,
> +                             <0 0x0b280000 0 0x10000>,
> +                             <0 0x0b480000 0 0x10000>;
> +                       reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
> +
> +                       interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hfi", "gmu";
> +
> +                       clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
> +                                <&gpucc GPU_CC_CXO_CLK>,
> +                                <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> +                                <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
> +                       clock-names = "gmu", "cxo", "axi", "memnoc";
> +
> +                       power-domains = <&gpucc GPU_CX_GDSC>,
> +                                       <&gpucc GPU_GX_GDSC>;
> +                       power-domain-names = "cx", "gx";
> +
> +                       iommus = <&adreno_smmu 5>;
> +
> +                       operating-points-v2 = <&gmu_opp_table>;
> +
> +                       status = "disabled";
> +
> +                       gmu_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-400000000 {
> +                                       opp-hz = /bits/ 64 <400000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +                               };
> +
> +                               opp-200000000 {
> +                                       opp-hz = /bits/ 64 <200000000>;
> +                                       opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +                               };
> +                       };
> +               };
> +
> +               dispcc: clock-controller at af00000 {
> +                       compatible = "qcom,sdm845-dispcc";
> +                       reg = <0 0x0af00000 0 0x10000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <&gcc GCC_DISP_GPLL0_CLK_SRC>,
> +                                <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
> +                                <&mdss_dsi0_phy 0>,
> +                                <&mdss_dsi0_phy 1>,
> +                                <&mdss_dsi1_phy 0>,
> +                                <&mdss_dsi1_phy 1>,
> +                                <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +                                <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> +                       clock-names = "bi_tcxo",
> +                                     "gcc_disp_gpll0_clk_src",
> +                                     "gcc_disp_gpll0_div_clk_src",
> +                                     "dsi0_phy_pll_out_byteclk",
> +                                     "dsi0_phy_pll_out_dsiclk",
> +                                     "dsi1_phy_pll_out_byteclk",
> +                                     "dsi1_phy_pll_out_dsiclk",
> +                                     "dp_link_clk_divsel_ten",
> +                                     "dp_vco_divided_clk_src_mux";
>                         #clock-cells = <1>;
>                         #reset-cells = <1>;
>                         #power-domain-cells = <1>;
>                 };
>
> -               tlmm: pinctrl at 3400000 {
> -                       compatible = "qcom,sdm845-pinctrl";
> -                       reg = <0x3400000 0xc00000>;
> -                       gpio-count = <150>;
> -                       gpio-controller;
> -                       #gpio-cells = <2>;
> -                       gpio-ranges = <&tlmm 0 0 150>;
> +               pdc_intc: interrupt-controller at b220000 {
> +                       compatible = "qcom,sdm845-pdc", "qcom,pdc";
> +                       reg = <0 0x0b220000 0 0x30000>;
> +                       qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
> +                       #interrupt-cells = <2>;
> +                       interrupt-parent = <&intc>;
> +                       interrupt-controller;
> +               };
>
> -                       /* DEBUG UART */
> -                       qup_uart9: qup-uart9-default {
> -                               pins = "GPIO_4", "GPIO_5";
> -                               function = "qup9";
> +               pdc_reset: reset-controller at b2e0000 {
> +                       compatible = "qcom,sdm845-pdc-global";
> +                       reg = <0 0x0b2e0000 0 0x20000>;
> +                       #reset-cells = <1>;
> +               };
> +
> +               tsens0: thermal-sensor at c263000 {
> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0 0x0c263000 0 0x1ff>, /* TM */
> +                             <0 0x0c222000 0 0x1ff>; /* SROT */
> +                       #qcom,sensors = <13>;
> +                       interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "uplow", "critical";
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
> +               tsens1: thermal-sensor at c265000 {
> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0 0x0c265000 0 0x1ff>, /* TM */
> +                             <0 0x0c223000 0 0x1ff>; /* SROT */
> +                       #qcom,sensors = <8>;
> +                       interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "uplow", "critical";
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
> +               aoss_reset: reset-controller at c2a0000 {
> +                       compatible = "qcom,sdm845-aoss-cc";
> +                       reg = <0 0x0c2a0000 0 0x31000>;
> +                       #reset-cells = <1>;
> +               };
> +
> +               aoss_qmp: power-management at c300000 {
> +                       compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
> +                       reg = <0 0x0c300000 0 0x400>;
> +                       interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> +                       mboxes = <&apss_shared 0>;
> +
> +                       #clock-cells = <0>;
> +
> +                       cx_cdev: cx {
> +                               #cooling-cells = <2>;
> +                       };
> +
> +                       ebi_cdev: ebi {
> +                               #cooling-cells = <2>;
>                         };
>                 };
>
> -               qupv3_id_1: geniqup at ac0000 {
> -                       compatible = "qcom,geni-se-qup";
> -                       reg = <0x00ac0000 0x6000>;
> +               sram at c3f0000 {
> +                       compatible = "qcom,sdm845-rpmh-stats";
> +                       reg = <0 0x0c3f0000 0 0x400>;
> +               };
> +
> +               spmi_bus: spmi at c440000 {
> +                       compatible = "qcom,spmi-pmic-arb";
> +                       reg = <0 0x0c440000 0 0x1100>,
> +                             <0 0x0c600000 0 0x2000000>,
> +                             <0 0x0e600000 0 0x100000>,
> +                             <0 0x0e700000 0 0xa0000>,
> +                             <0 0x0c40a000 0 0x26000>;
> +                       reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +                       interrupt-names = "periph_irq";
> +                       interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
> +                       qcom,ee = <0>;
> +                       qcom,channel = <0>;
> +                       #address-cells = <2>;
> +                       #size-cells = <0>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <4>;
> +               };
> +
> +               sram at 146bf000 {
> +                       compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
> +                       reg = <0 0x146bf000 0 0x1000>;
> +
>                         #address-cells = <1>;
>                         #size-cells = <1>;
> -                       ranges;
>
> -                       uart9: serial at a84000 {
> -                               compatible = "qcom,geni-debug-uart";
> -                               reg = <0xa84000 0x4000>;
> -                               clock-names = "se";
> -                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> -                               pinctrl-names = "default";
> -                               pinctrl-0 = <&qup_uart9>;
> +                       ranges = <0 0 0x146bf000 0x1000>;
> +
> +                       pil-reloc at 94c {
> +                               compatible = "qcom,pil-reloc-info";
> +                               reg = <0x94c 0xc8>;
>                         };
>                 };
>
> -               spmi at c440000 {
> -                       compatible = "qcom,spmi-pmic-arb";
> -                       reg = <0xc440000 0x1100>,
> -                             <0xc600000 0x2000000>,
> -                             <0xe600000 0x100000>;
> -                       reg-names = "core", "chnls", "obsrvr";
> -                       #address-cells = <0x1>;
> -                       #size-cells = <0x1>;
> +               apps_smmu: iommu at 15000000 {
> +                       compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
> +                       reg = <0 0x15000000 0 0x80000>;
> +                       #iommu-cells = <2>;
> +                       #global-interrupts = <1>;
> +                       interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
> +               };
>
> -                       qcom,revid at 100 {
> -                               compatible = "qcom,qpnp-revid";
> -                               reg = <0x100 0x100>;
> +               lpasscc: clock-controller at 17014000 {
> +                       compatible = "qcom,sdm845-lpasscc";
> +                       reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
> +                       reg-names = "cc", "qdsp6ss";
> +                       #clock-cells = <1>;
> +                       status = "disabled";
> +               };
> +
> +               gladiator_noc: interconnect at 17900000 {
> +                       compatible = "qcom,sdm845-gladiator-noc";
> +                       reg = <0 0x17900000 0 0xd080>;
> +                       #interconnect-cells = <2>;
> +                       qcom,bcm-voters = <&apps_bcm_voter>;
> +               };
> +
> +               watchdog at 17980000 {
> +                       compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
> +                       reg = <0 0x17980000 0 0x1000>;
> +                       clocks = <&sleep_clk>;
> +                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> +               };
> +
> +               apss_shared: mailbox at 17990000 {
> +                       compatible = "qcom,sdm845-apss-shared";
> +                       reg = <0 0x17990000 0 0x1000>;
> +                       #mbox-cells = <1>;
> +               };
> +
> +               apps_rsc: rsc at 179c0000 {
> +                       label = "apps_rsc";
> +                       compatible = "qcom,rpmh-rsc";
> +                       reg = <0 0x179c0000 0 0x10000>,
> +                             <0 0x179d0000 0 0x10000>,
> +                             <0 0x179e0000 0 0x10000>;
> +                       reg-names = "drv-0", "drv-1", "drv-2";
> +                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +                       qcom,tcs-offset = <0xd00>;
> +                       qcom,drv-id = <2>;
> +                       qcom,tcs-config = <ACTIVE_TCS  2>,
> +                                         <SLEEP_TCS   3>,
> +                                         <WAKE_TCS    3>,
> +                                         <CONTROL_TCS 1>;
> +                       power-domains = <&CLUSTER_PD>;
> +
> +                       apps_bcm_voter: bcm-voter {
> +                               compatible = "qcom,bcm-voter";
>                         };
>
> -                       pmic0: pm8998 at 0 {
> -                               compatible = "qcom,spmi-pmic";
> -                               reg = <0x0 0x1>;
> -                               #address-cells = <0x1>;
> -                               #size-cells = <0x1>;
> -
> -                               pm8998_pon: pon at 800 {
> -                                       compatible = "qcom,pm8998-pon";
> -
> -                                       reg = <0x800 0x100>;
> -                                       mode-bootloader = <0x2>;
> -                                       mode-recovery = <0x1>;
> -
> -                                       pm8998_pwrkey: pwrkey {
> -                                               compatible = "qcom,pm8941-pwrkey";
> -                                               debounce = <15625>;
> -                                               bias-pull-up;
> -                                       };
> -
> -                                       pm8998_resin: resin {
> -                                               compatible = "qcom,pm8941-resin";
> -                                               debounce = <15625>;
> -                                               bias-pull-up;
> -                                               status = "disabled";
> -                                       };
> -                               };
> -
> -                               pm8998_gpios: pm8998_gpios at c000 {
> -                                       compatible = "qcom,pm8998-gpio";
> -                                       reg = <0xc000 0x1a00>;
> -                                       gpio-controller;
> -                                       gpio-ranges = <&pm8998_gpios 0 0 26>;
> -                                       #gpio-cells = <2>;
> -                               };
> +                       rpmhcc: clock-controller {
> +                               compatible = "qcom,sdm845-rpmh-clk";
> +                               #clock-cells = <1>;
> +                               clock-names = "xo";
> +                               clocks = <&xo_board>;
>                         };
>
> -                       pmic1: pm8998 at 1 {
> -                               compatible = "qcom,spmi-pmic";
> -                               reg = <0x1 0x0>;
> -                               #address-cells = <0x2>;
> -                               #size-cells = <0x0>;
> +                       rpmhpd: power-controller {
> +                               compatible = "qcom,sdm845-rpmhpd";
> +                               #power-domain-cells = <1>;
> +                               operating-points-v2 = <&rpmhpd_opp_table>;
> +
> +                               rpmhpd_opp_table: opp-table {
> +                                       compatible = "operating-points-v2";
> +
> +                                       rpmhpd_opp_ret: opp1 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> +                                       };
> +
> +                                       rpmhpd_opp_min_svs: opp2 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +                                       };
> +
> +                                       rpmhpd_opp_low_svs: opp3 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +                                       };
> +
> +                                       rpmhpd_opp_svs: opp4 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +                                       };
> +
> +                                       rpmhpd_opp_svs_l1: opp5 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +                                       };
> +
> +                                       rpmhpd_opp_nom: opp6 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +                                       };
> +
> +                                       rpmhpd_opp_nom_l1: opp7 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +                                       };
> +
> +                                       rpmhpd_opp_nom_l2: opp8 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> +                                       };
> +
> +                                       rpmhpd_opp_turbo: opp9 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +                                       };
> +
> +                                       rpmhpd_opp_turbo_l1: opp10 {
> +                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               intc: interrupt-controller at 17a00000 {
> +                       compatible = "arm,gic-v3";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       #interrupt-cells = <3>;
> +                       interrupt-controller;
> +                       reg = <0 0x17a00000 0 0x10000>,     /* GICD */
> +                             <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
> +                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                       msi-controller at 17a40000 {
> +                               compatible = "arm,gic-v3-its";
> +                               msi-controller;
> +                               #msi-cells = <1>;
> +                               reg = <0 0x17a40000 0 0x20000>;
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               slimbam: dma-controller at 17184000 {
> +                       compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +                       qcom,controlled-remotely;
> +                       reg = <0 0x17184000 0 0x2a000>;
> +                       num-channels = <31>;
> +                       interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +                       #dma-cells = <1>;
> +                       qcom,ee = <1>;
> +                       qcom,num-ees = <2>;
> +                       iommus = <&apps_smmu 0x1806 0x0>;
> +               };
> +
> +               timer at 17c90000 {
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges = <0 0 0 0x20000000>;
> +                       compatible = "arm,armv7-timer-mem";
> +                       reg = <0 0x17c90000 0 0x1000>;
> +
> +                       frame at 17ca0000 {
> +                               frame-number = <0>;
> +                               interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +                                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17ca0000 0x1000>,
> +                                     <0x17cb0000 0x1000>;
> +                       };
> +
> +                       frame at 17cc0000 {
> +                               frame-number = <1>;
> +                               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17cc0000 0x1000>;
> +                               status = "disabled";
> +                       };
> +
> +                       frame at 17cd0000 {
> +                               frame-number = <2>;
> +                               interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17cd0000 0x1000>;
> +                               status = "disabled";
> +                       };
> +
> +                       frame at 17ce0000 {
> +                               frame-number = <3>;
> +                               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17ce0000 0x1000>;
> +                               status = "disabled";
> +                       };
> +
> +                       frame at 17cf0000 {
> +                               frame-number = <4>;
> +                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17cf0000 0x1000>;
> +                               status = "disabled";
> +                       };
> +
> +                       frame at 17d00000 {
> +                               frame-number = <5>;
> +                               interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17d00000 0x1000>;
> +                               status = "disabled";
> +                       };
> +
> +                       frame at 17d10000 {
> +                               frame-number = <6>;
> +                               interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +                               reg = <0x17d10000 0x1000>;
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               osm_l3: interconnect at 17d41000 {
> +                       compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
> +                       reg = <0 0x17d41000 0 0x1400>;
> +
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> +                       clock-names = "xo", "alternate";
> +
> +                       #interconnect-cells = <1>;
> +               };
> +
> +               cpufreq_hw: cpufreq at 17d43000 {
> +                       compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
> +                       reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
> +                       reg-names = "freq-domain0", "freq-domain1";
> +
> +                       interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
> +
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> +                       clock-names = "xo", "alternate";
> +
> +                       #freq-domain-cells = <1>;
> +                       #clock-cells = <1>;
> +               };
> +
> +               wifi: wifi at 18800000 {
> +                       compatible = "qcom,wcn3990-wifi";
> +                       status = "disabled";
> +                       reg = <0 0x18800000 0 0x800000>;
> +                       reg-names = "membase";
> +                       memory-region = <&wlan_msa_mem>;
> +                       clock-names = "cxo_ref_clk_pin";
> +                       clocks = <&rpmhcc RPMH_RF_CLK2>;
> +                       interrupts =
> +                               <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> +                               <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
> +                       iommus = <&apps_smmu 0x0040 0x1>;
> +               };
> +       };
> +
> +       sound: sound {
> +       };
> +
> +       thermal-zones {
> +               cpu0-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 1>;
> +
> +                       trips {
> +                               cpu0_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu0_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu0_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu1-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 2>;
> +
> +                       trips {
> +                               cpu1_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu1_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu1_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu2-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 3>;
> +
> +                       trips {
> +                               cpu2_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu2_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu2_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu3-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 4>;
> +
> +                       trips {
> +                               cpu3_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu3_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu3_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu4-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 7>;
> +
> +                       trips {
> +                               cpu4_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu4_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu4_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu5-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 8>;
> +
> +                       trips {
> +                               cpu5_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu5_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu5_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu6-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 9>;
> +
> +                       trips {
> +                               cpu6_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu6_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu6_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu7-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 10>;
> +
> +                       trips {
> +                               cpu7_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu7_alert1: trip-point1 {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu7_crit: cpu-crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               aoss0-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 0>;
> +
> +                       trips {
> +                               aoss0_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               cluster0-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 5>;
> +
> +                       trips {
> +                               cluster0_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                               cluster0_crit: cluster0_crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cluster1-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 6>;
> +
> +                       trips {
> +                               cluster1_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                               cluster1_crit: cluster1_crit {
> +                                       temperature = <110000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               gpu-top-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 11>;
> +
> +                       trips {
> +                               gpu1_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               gpu-bottom-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 12>;
> +
> +                       trips {
> +                               gpu2_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               aoss1-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 0>;
> +
> +                       trips {
> +                               aoss1_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               q6-modem-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 1>;
> +
> +                       trips {
> +                               q6_modem_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               mem-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 2>;
> +
> +                       trips {
> +                               mem_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               wlan-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 3>;
> +
> +                       trips {
> +                               wlan_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               q6-hvx-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 4>;
> +
> +                       trips {
> +                               q6_hvx_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               camera-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 5>;
> +
> +                       trips {
> +                               camera_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               video-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 6>;
> +
> +                       trips {
> +                               video_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
> +                       };
> +               };
> +
> +               modem-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens1 7>;
> +
> +                       trips {
> +                               modem_alert0: trip-point0 {
> +                                       temperature = <90000>;
> +                                       hysteresis = <2000>;
> +                                       type = "hot";
> +                               };
>                         };
>                 };
>         };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
> +       };
>  };
> diff --git a/arch/arm/dts/starqltechn-uboot.dtsi b/arch/arm/dts/starqltechn-uboot.dtsi
> deleted file mode 100644
> index 55c6d18412ba..000000000000
> --- a/arch/arm/dts/starqltechn-uboot.dtsi
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * U-Boot addition to handle Samsung S9 SM-G9600 (starqltechn) pins
> - *
> - * (C) Copyright 2021 Dzmitry Sankouski <dsankouski at gmail.com>
> - *
> - */
> -
> -/
> -{
> -       framebuffer at 9D400000 {
> -               bootph-all;
> -       };
> -       soc {
> -               bootph-all;
> -               serial at a84000 {
> -                       bootph-all;
> -               };
> -               clock-controller at 100000 {
> -                       bootph-all;
> -               };
> -               pinctrl at 3400000 {
> -                       bootph-all;
> -               };
> -       };
> -};
> -
> diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts
> deleted file mode 100644
> index 0842e19adb60..000000000000
> --- a/arch/arm/dts/starqltechn.dts
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Samsung S9 SM-G9600 (starqltechn) board device tree source
> - *
> - * (C) Copyright 2021 Dzmitry Sankouski <dsankouski at gmail.com>
> - *
> - */
> -
> -/dts-v1/;
> -
> -#include "sdm845.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -
> -/ {
> -       model = "Samsung S9 (SM-G9600)";
> -       compatible = "qcom,sdm845-mtp", "qcom,sdm845", "qcom,mtp";
> -       #address-cells = <2>;
> -       #size-cells = <2>;
> -
> -       chosen {
> -               stdout-path = "serial0:921600n8";
> -       };
> -
> -       aliases {
> -               serial0 = &uart9;
> -       };
> -
> -       memory {
> -               device_type = "memory";
> -               reg = <0 0x80000000 0 0xfe1bffff>;
> -       };
> -
> -       psci {
> -               compatible = "arm,psci-1.0";
> -               method = "smc";
> -       };
> -
> -       framebuffer: framebuffer at 9D400000 {
> -               compatible = "simple-framebuffer";
> -               reg = <0 0x9D400000 0 (2960 * 1440 * 4)>;//2400000
> -               width = <1440>;
> -               height = <2960>;
> -               stride = <(1440 * 4)>;
> -               format = "a8r8g8b8";
> -       };
> -
> -       soc: soc {
> -               serial at a84000 {
> -                       status = "okay";
> -               };
> -       };
> -};
> -
> -&pm8998_resin {
> -       status = "okay";
> -};
> -
> -&tlmm {
> -       muic_i2c: muic-i2c-n {
> -               pins = "GPIO_33", "GPIO_34";
> -               drive-strength = <0x2>;
> -               function = "gpio";
> -               bias-disable;
> -       };
> -};
> -
> -#include "starqltechn-uboot.dtsi"
> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
> index a84f5aee444e..222db6448aba 100644
> --- a/configs/qcom_defconfig
> +++ b/configs/qcom_defconfig
> @@ -2,7 +2,7 @@ CONFIG_ARM=y
>  CONFIG_SKIP_LOWLEVEL_INIT=y
>  CONFIG_POSITION_INDEPENDENT=y
>  CONFIG_ARCH_SNAPDRAGON=y
> -CONFIG_DEFAULT_DEVICE_TREE="dragonboard845c"
> +CONFIG_DEFAULT_DEVICE_TREE="sdm845-db845c"
>  CONFIG_SYS_LOAD_ADDR=0x0
>  CONFIG_BUTTON_CMD=y
>  CONFIG_FIT=y
>
> --
> 2.43.1
>


More information about the U-Boot mailing list