[PATCH 00/10] ECC Series

[Santhosh Kumar K]

On 31/01/24 11:32, Santhosh Kumar K wrote:
> This series is to:
> 1. Enable ECC priming with BIST engine (Patch 1)
> 2. Add a function to store base address and size of RAM's banks
>     in a 64 bit device private data (Patch 2)
> 3. Setup the ECC region start and range (Patch 3)
> 4. Enable ECC 1 bit error, 2 bit error and multiple bit
>     error interrupts (Patch 4)
> 5. Add CONFIG_K3_INLINE_ECC (Patch 5)
> 6. Pull the redundant DDR functions to a common location (Patch 6)
> 7. Remove redundant DDR functions (Patch 7, 8)
> 8. Fixup DDR size when ECC is enabled (Patch 9)
> 9. Add ss_cfg reg entry (Patch 10)
> 
> Tested on AM62X and AM62A, results:
> AM62X: https://gist.github.com/santhosh21/c5f07cd921bd2b12d12385f22c698ee6
> AM62A: https://gist.github.com/santhosh21/e5fa684d890d65b4034346435213ec8b
> 
> Things to look in the test log:
> 1. Time-taken for priming
> 2. Fixed up DDR size (RAM size =- ECC reserved space).
> 
> Thanks and Regards,
> Santhosh.
> 
> Georgi Vlaev (1):
>    ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming
> 
> Neha Malcom Francis (1):
>    drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC
> 
> Santhosh Kumar K (8):
>    ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve
>      'calculations restricted to 32 bits' issue
>    ram: k3-ddrss: Setup ECC region start and range
>    ram: k3-ddrss: Enable ECC interrupts
>    board: ti: common: k3-ddr-init: Pull redundant DDR functions to a
>      common location


This patch seems to break compilation on J7* platforms, I'll post a v2.
Please don't merge the series.


>    board: ti: am64x: evm: Remove redundant DDR functions
>    board: ti: am62x: evm: Remove redundant DDR functions
>    board: ti: am62ax: evm: Fixup DDR size when ECC is enabled
>    arm: dts: k3-am62a-ddr: Add ss_cfg reg entry
> 
>   arch/arm/dts/k3-am62a-ddr.dtsi  |   7 +-
>   board/ti/am62ax/evm.c           |  16 +--
>   board/ti/am62x/evm.c            |  61 +---------
>   board/ti/am64x/evm.c            |  71 +----------
>   board/ti/common/k3-ddr-init.c   |  75 ++++++++++++
>   board/ti/common/k3-ddr-init.h   |  15 +++
>   drivers/ram/Kconfig             |  11 ++
>   drivers/ram/k3-ddrss/k3-ddrss.c | 209 +++++++++++++++++++++++++++-----
>   8 files changed, 307 insertions(+), 158 deletions(-)
>   create mode 100644 board/ti/common/k3-ddr-init.c
>   create mode 100644 board/ti/common/k3-ddr-init.h
> 

Thanks and Regards,
Santhosh.