Booting RPi5B with latest git

Jojan jjvazha at yahoo.com
Sat Feb 17 20:29:15 CET 2024


 You might get these build errorsError:arch/arm/dts/bcm283x-u-boot.dtsi:42.1-14 Label or path uart0_gpio14 not found
Error: arch/arm/dts/bcm283x-u-boot.dtsi:46.1-14 Label or path uart1_gpio14 notfound

I just Just commented  out that.

    On Saturday, February 17, 2024 at 11:17:12 AM PST, John <therealgraysky at proton.me> wrote:  
 
 
On Saturday, February 17th, 2024 at 1:55 PM, Jojan <jjvazha at yahoo.com> wrote:

> For RPi 5B you need bcm2712 device tree . RPi4 uses 2711.
> So the e rpi_arm64_confi does not work for RPi5
> 

Which config target did you build or did you modify rpi_arm64_config?  If so, can you share the diff?  You mentioned modifying "the config" in your message below.

> Also make sure that you have the changes  discussed here.[GIT PULL] rpi: updates for v2024.04 (mail-archive.com)

I built from the master branch of the github mirror.  That should have these changes incorporate, no?  https://github.com/u-boot/u-boot/commits/master/

> Iwas able to get the git (https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git tags/rpi-next-2024.04)
> 
> and modify the config to get 2712 dts file, and able to get u-boot.
> [GIT PULL] rpi: updates for v2024.04
> 
> 
> 
> 
> 
> 
> 
> On Saturday, February 17, 2024 at 08:36:22 AM PST, John <therealgraysky at proton.me> wrote:
> 
> 
> I am running Arch ARM on a RPi4B and also on a RPi5B. My RPi4B can boot the vanilla kernel package (linux-aarch64) with the latest uboot-raspberrypi (2024.04-rc2) just fine. Yet, if I take that uSD card and place it in my RPi5B, it does not boot. I only see the "U-Boot" submarine logo in the upper right of the screen/no debug output. Any thoughts are appreciated.
> 
> I built u-boot like this:
> 
> unset CFLAGS
> unset CXXFLAGS
> unset CPPFLAGS
> 
> make rpi_arm64_config
> echo 'CONFIG_IDENT_STRING=" Arch Linux ARM"' >> .config
> make EXTRAVERSION=-2024.04rc2
  


More information about the U-Boot mailing list