[PATCH v4 14/39] pinctrl: qcom: fix DT compatibility
Caleb Connolly
caleb.connolly at linaro.org
Thu Feb 15 21:52:32 CET 2024
Upstream devicetrees label GPIOs with "gpioX", not "GPIO_X", fix this
for SoCs where we're now using upstream DT.
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
drivers/pinctrl/qcom/pinctrl-apq8016.c | 26 +++++++--------
drivers/pinctrl/qcom/pinctrl-apq8096.c | 16 +++++-----
drivers/pinctrl/qcom/pinctrl-qcs404.c | 58 ++++++++++++++++++++++++++++------
3 files changed, 69 insertions(+), 31 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c
index 8149ffd83cc4..10796710ba7a 100644
--- a/drivers/pinctrl/qcom/pinctrl-apq8016.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c
@@ -14,18 +14,18 @@
#define MAX_PIN_NAME_LEN 32
static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
static const char * const msm_pinctrl_pins[] = {
- "SDC1_CLK",
- "SDC1_CMD",
- "SDC1_DATA",
- "SDC2_CLK",
- "SDC2_CMD",
- "SDC2_DATA",
- "QDSD_CLK",
- "QDSD_CMD",
- "QDSD_DATA0",
- "QDSD_DATA1",
- "QDSD_DATA2",
- "QDSD_DATA3",
+ "sdc1_clk",
+ "sdc1_cmd",
+ "sdc1_data",
+ "sdc2_clk",
+ "sdc2_cmd",
+ "sdc2_data",
+ "qdsd_clk",
+ "qdsd_cmd",
+ "qdsd_data0",
+ "qdsd_data1",
+ "qdsd_data2",
+ "qdsd_data3",
};
static const struct pinctrl_function msm_pinctrl_functions[] = {
@@ -42,7 +42,7 @@ static const char *apq8016_get_pin_name(struct udevice *dev,
unsigned int selector)
{
if (selector < 122) {
- snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+ snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
return pin_name;
} else {
return msm_pinctrl_pins[selector - 122];
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8096.c b/drivers/pinctrl/qcom/pinctrl-apq8096.c
index d64ab1ff7bee..f2eeb4cf469a 100644
--- a/drivers/pinctrl/qcom/pinctrl-apq8096.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8096.c
@@ -14,13 +14,13 @@
#define MAX_PIN_NAME_LEN 32
static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
static const char * const msm_pinctrl_pins[] = {
- "SDC1_CLK",
- "SDC1_CMD",
- "SDC1_DATA",
- "SDC2_CLK",
- "SDC2_CMD",
- "SDC2_DATA",
- "SDC1_RCLK",
+ "sdc1_clk",
+ "sdc1_cmd",
+ "sdc1_data",
+ "sdc2_clk",
+ "sdc2_cmd",
+ "sdc2_data",
+ "sdc1_rclk",
};
static const struct pinctrl_function msm_pinctrl_functions[] = {
@@ -37,7 +37,7 @@ static const char *apq8096_get_pin_name(struct udevice *dev,
unsigned int selector)
{
if (selector < 150) {
- snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+ snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
return pin_name;
} else {
return msm_pinctrl_pins[selector - 150];
diff --git a/drivers/pinctrl/qcom/pinctrl-qcs404.c b/drivers/pinctrl/qcom/pinctrl-qcs404.c
index ac00afa2a1f4..5066f2bba6b3 100644
--- a/drivers/pinctrl/qcom/pinctrl-qcs404.c
+++ b/drivers/pinctrl/qcom/pinctrl-qcs404.c
@@ -10,20 +10,24 @@
#include "pinctrl-qcom.h"
+#define NORTH 0x00300000
+#define SOUTH 0x00000000
+#define EAST 0x06b00000
+
#define MAX_PIN_NAME_LEN 32
static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
static const char * const msm_pinctrl_pins[] = {
- "SDC1_RCLK",
- "SDC1_CLK",
- "SDC1_CMD",
- "SDC1_DATA",
- "SDC2_CLK",
- "SDC2_CMD",
- "SDC2_DATA",
+ "sdc1_rclk",
+ "sdc1_clk",
+ "sdc1_cmd",
+ "sdc1_data",
+ "sdc2_clk",
+ "sdc2_cmd",
+ "sdc2_data",
};
static const struct pinctrl_function msm_pinctrl_functions[] = {
- {"blsp_uart2", 1},
+ {"gpio", 0},
{"rgmii_int", 1},
{"rgmii_ck", 1},
{"rgmii_tx", 1},
@@ -37,6 +41,40 @@ static const struct pinctrl_function msm_pinctrl_functions[] = {
{"blsp_i2c_scl_a2", 3},
{"blsp_i2c3", 2},
{"blsp_i2c4", 1},
+ {"blsp_uart_tx_a2", 1},
+ {"blsp_uart_rx_a2", 1},
+};
+
+static const unsigned int qcs404_pin_offsets[] = {
+ [0] = SOUTH, [1] = SOUTH, [2] = SOUTH, [3] = SOUTH, [4] = SOUTH,
+ [5] = SOUTH, [6] = SOUTH, [7] = SOUTH, [8] = SOUTH, [9] = SOUTH,
+ [10] = SOUTH, [11] = SOUTH, [12] = SOUTH, [13] = SOUTH, [14] = SOUTH,
+ [15] = SOUTH, [16] = SOUTH, [17] = NORTH, [18] = NORTH, [19] = NORTH,
+ [20] = NORTH, [21] = SOUTH, [22] = NORTH, [23] = NORTH, [24] = NORTH,
+ [25] = NORTH, [26] = EAST, [27] = EAST, [28] = EAST, [29] = EAST,
+ [30] = NORTH, [31] = NORTH, [32] = NORTH, [33] = NORTH, [34] = SOUTH,
+ [35] = SOUTH, [36] = NORTH, [37] = NORTH, [38] = NORTH, [39] = EAST,
+ [40] = EAST, [41] = EAST, [42] = EAST, [43] = EAST, [44] = EAST,
+ [45] = EAST, [46] = EAST, [47] = EAST, [48] = EAST, [49] = EAST,
+ [50] = EAST, [51] = EAST, [52] = EAST, [53] = EAST, [54] = EAST,
+ [55] = EAST, [56] = EAST, [57] = EAST, [58] = EAST, [59] = EAST,
+ [60] = NORTH, [61] = NORTH, [62] = NORTH, [63] = NORTH, [64] = NORTH,
+ [65] = NORTH, [66] = NORTH, [67] = NORTH, [68] = NORTH, [69] = NORTH,
+ [70] = NORTH, [71] = NORTH, [72] = NORTH, [73] = NORTH, [74] = NORTH,
+ [75] = NORTH, [76] = NORTH, [77] = NORTH, [78] = EAST, [79] = EAST,
+ [80] = EAST, [81] = EAST, [82] = NORTH, [83] = NORTH, [84] = NORTH,
+ [85] = NORTH, [86] = EAST, [87] = EAST, [88] = EAST, [89] = EAST,
+ [90] = EAST, [91] = EAST, [92] = EAST, [93] = EAST, [94] = EAST,
+ [95] = EAST, [96] = EAST, [97] = EAST, [98] = EAST, [99] = EAST,
+ [100] = EAST, [101] = EAST, [102] = EAST, [103] = EAST, [104] = EAST,
+ [105] = EAST, [106] = EAST, [107] = EAST, [108] = EAST, [109] = EAST,
+ [110] = EAST, [111] = EAST, [112] = EAST, [113] = EAST, [114] = EAST,
+ [115] = EAST, [116] = EAST, [117] = NORTH, [118] = NORTH, [119] = EAST,
+ /*
+ * There's 126 pins but the last ones are special and have non-standard registers
+ * so we leave them out here. The pinctrl and GPIO drivers both currently ignore
+ * these pins.
+ */
};
static const char *qcs404_get_function_name(struct udevice *dev,
@@ -49,7 +87,7 @@ static const char *qcs404_get_pin_name(struct udevice *dev,
unsigned int selector)
{
if (selector < 120) {
- snprintf(pin_name, MAX_PIN_NAME_LEN, "GPIO_%u", selector);
+ snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
return pin_name;
} else {
return msm_pinctrl_pins[selector - 120];
@@ -62,7 +100,7 @@ static unsigned int qcs404_get_function_mux(unsigned int selector)
}
static struct msm_pinctrl_data qcs404_data = {
- .pin_data = { .pin_count = 126, },
+ .pin_data = { .pin_count = 126, .pin_offsets = qcs404_pin_offsets, .special_pins_start = 120, },
.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
.get_function_name = qcs404_get_function_name,
.get_function_mux = qcs404_get_function_mux,
--
2.43.1
More information about the U-Boot
mailing list