[PATCH 2/7] reset: imx: Add support for i.MX8MP reset controller
Sumit Garg
sumit.garg at linaro.org
Wed Feb 21 06:40:25 CET 2024
On Tue, 20 Feb 2024 at 21:02, Marek Vasut <marex at denx.de> wrote:
>
> On 2/20/24 14:10, Sumit Garg wrote:
> > Pre-requisite to enable PCIe support on iMX8MP SoC.
>
> Please write a proper commit message .
>
How about the following?
Add support for i.MX8MP reset controller. It is required
to enable PCIe support on the iMX8MP SoC.
> > Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
> > ---
> > drivers/reset/reset-imx7.c | 114 +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 114 insertions(+)
> >
> > diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
> > index eaef2cc2cdf..c1de84dea8b 100644
> > --- a/drivers/reset/reset-imx7.c
> > +++ b/drivers/reset/reset-imx7.c
> > @@ -10,6 +10,7 @@
> > #include <dm.h>
> > #include <dt-bindings/reset/imx7-reset.h>
> > #include <dt-bindings/reset/imx8mq-reset.h>
> > +#include <dt-bindings/reset/imx8mp-reset.h>
> > #include <reset-uclass.h>
> > #include <linux/bitops.h>
> > #include <linux/delay.h>
> > @@ -252,6 +253,115 @@ static int imx7_reset_assert_imx8mq(struct reset_ctl *rst)
> > return 0;
> > }
> >
> > +enum imx8mp_src_registers {
> > + SRC_SUPERMIX_RCR = 0x0018,
> > + SRC_AUDIOMIX_RCR = 0x001c,
> > + SRC_MLMIX_RCR = 0x0028,
> > + SRC_GPU2D_RCR = 0x0038,
> > + SRC_GPU3D_RCR = 0x003c,
> > + SRC_VPU_G1_RCR = 0x0048,
> > + SRC_VPU_G2_RCR = 0x004c,
> > + SRC_VPUVC8KE_RCR = 0x0050,
> > + SRC_NOC_RCR = 0x0054,
> > +};
>
> This seems copied from Linux, include Linux commit ID as of which this
> was imported from in commit message.
Do you expect imx8mp_src_registers to change? I expect them to be the
same, so does Linux commit ID add any value here?
-Sumit
More information about the U-Boot
mailing list