EXT: [PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL
Ian Ray
ian.ray at gehealthcare.com
Thu Feb 15 13:05:18 CET 2024
On Tue, Feb 13, 2024 at 08:43:38AM -0300, Fabio Estevam wrote:
>
> From: Fabio Estevam <festevam at denx.de>
>
> The conversion to DM_SERIAL is mandatory, so do the conversion.
>
> Signed-off-by: Fabio Estevam <festevam at denx.de>
Reviewed-by: Ian Ray <ian.ray at gehealthcare.com>
> ---
> arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi | 8 ++++++++
> board/msc/sm2s_imx8mp/spl.c | 9 ---------
> configs/msc_sm2s_imx8mp_defconfig | 1 +
> include/configs/msc_sm2s_imx8mp.h | 2 --
> 4 files changed, 9 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> index c398a743f7..1a7b530d9f 100644
> --- a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
> @@ -63,3 +63,11 @@
> &pmic {
> bootph-pre-ram;
> };
> +
> +&uart2 {
> + bootph-pre-ram;
> +};
> +
> +&pinctrl_uart2 {
> + bootph-pre-ram;
> +};
> diff --git a/board/msc/sm2s_imx8mp/spl.c b/board/msc/sm2s_imx8mp/spl.c
> index fed0fbcba1..ed7a1b7d3d 100644
> --- a/board/msc/sm2s_imx8mp/spl.c
> +++ b/board/msc/sm2s_imx8mp/spl.c
> @@ -168,13 +168,6 @@ static const iomux_v3_cfg_t wdog_pads[] = {
> MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
> };
>
> -#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
> -
> -static const iomux_v3_cfg_t ser0_pads[] = {
> - MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> -};
> -
> int board_early_init_f(void)
> {
> struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> @@ -182,8 +175,6 @@ int board_early_init_f(void)
> imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
> set_wdog_reset(wdog);
>
> - imx_iomux_v3_setup_multiple_pads(ser0_pads, ARRAY_SIZE(ser0_pads));
> -
> return 0;
> }
>
> diff --git a/configs/msc_sm2s_imx8mp_defconfig b/configs/msc_sm2s_imx8mp_defconfig
> index bf1052db6f..9c27a72f8a 100644
> --- a/configs/msc_sm2s_imx8mp_defconfig
> +++ b/configs/msc_sm2s_imx8mp_defconfig
> @@ -97,6 +97,7 @@ CONFIG_SPL_PMIC_RN5T567=y
> CONFIG_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_SERIAL=y
> CONFIG_MXC_UART=y
> CONFIG_SYSRESET=y
> CONFIG_SPL_SYSRESET=y
> diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h
> index c1c1fd5a78..3c7d96cb3c 100644
> --- a/include/configs/msc_sm2s_imx8mp.h
> +++ b/include/configs/msc_sm2s_imx8mp.h
> @@ -55,8 +55,6 @@
> #define PHYS_SDRAM_2 0xc0000000
> #define PHYS_SDRAM_2_SIZE 0x0
>
> -#define CFG_MXC_UART_BASE UART2_BASE_ADDR
> -
> #define CFG_SYS_FSL_USDHC_NUM 2
> #define CFG_SYS_FSL_ESDHC_ADDR 0
>
> --
> 2.34.1
>
>
More information about the U-Boot
mailing list