[PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx

[Frieder Schrempf]

On 30.01.24 04:11, Bruce Sun wrote:
> 	
> Sie erhalten nicht oft eine E-Mail von bruce_suen at 163.com. Erfahren Sie,
> warum dies wichtig ist <https://aka.ms/LearnAboutSenderIdentification>
> 	
> 
> 
> On 1/29/2024 8:00 PM, Jagan Teki wrote:
>> On Tue, Dec 26, 2023 at 1:28 PM Bruce Suen <bruce_suen at 163.com> wrote:
>>> Add Support XTX Technology XT26G01DXXXXX, XT26G11DXXXXX, XT26Q01DXXXXX,
>>> XT26G02DXXXXX, XT26G12DXXXXX, XT26Q02DXXXXX, XT26G04DXXXXX, and
>>> XT26Q04DXXXXX SPI NAND.
>>>
>>> These are 3V/1.8V 1G/2G/4Gbit serial SLC NAND flash device with on-die
>>> ECC(8bit strength per 512bytes).
>>>
>>> Datasheet Links:
>>> - http://www.xtxtech.com/download/?AId=458
>>> - http://www.xtxtech.com/download/?AId=495
>>>
>>> Signed-off-by: Bruce Suen <bruce_suen at 163.com>
>>> ---
>> This won't apply on my spi tree, maybe some out-of-master changes are stopping.
>
> can you give me your spi tree? I use
> "https://source.denx.de/u-boot/custodians/u-boot-nand-flash.git“ before.

Using u-boot-nand-flash seems correct as this is what MAINTAINERS lists
as tree for SPI NAND.

Jagan, I think this is expected to be handled by Dario and Michael and
not by the SPI maintainer.