[PATCH v5 09/39] gpio: qcom_pmic: 1-based GPIOs
Caleb Connolly
caleb.connolly at linaro.org
Mon Feb 26 18:26:13 CET 2024
Qualcomm PMICs number their GPIOs starting from 1, implement a custom
.xlate method to handle this.
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
Reviewed-by: Sumit Garg <sumit.garg at linaro.org>
Tested-by: Sumit Garg <sumit.garg at linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
drivers/gpio/qcom_pmic_gpio.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
index 6167c8411678..2a4fef8d28cb 100644
--- a/drivers/gpio/qcom_pmic_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -208,14 +208,36 @@ static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
REG_CTL_OUTPUT_MASK, !!value);
}
+static int qcom_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
+ struct ofnode_phandle_args *args)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (args->args_count < 1)
+ return -EINVAL;
+
+ /* GPIOs in DT are 1-based */
+ desc->offset = args->args[0] - 1;
+ if (desc->offset >= uc_priv->gpio_count)
+ return -EINVAL;
+
+ if (args->args_count < 2)
+ return 0;
+
+ desc->flags = gpio_flags_xlate(args->args[1]);
+
+ return 0;
+}
+
static const struct dm_gpio_ops qcom_gpio_ops = {
.direction_input = qcom_gpio_direction_input,
.direction_output = qcom_gpio_direction_output,
.get_value = qcom_gpio_get_value,
.set_value = qcom_gpio_set_value,
.get_function = qcom_gpio_get_function,
+ .xlate = qcom_gpio_xlate,
};
static int qcom_gpio_probe(struct udevice *dev)
{
--
2.43.1
More information about the U-Boot
mailing list