[PATCH 2/6] arm: mach-k3: Add config option for setting OP-TEE address
Andrew Davis
afd at ti.com
Wed Feb 14 17:30:05 CET 2024
Much like we have for ATF, OP-TEE has a standard address that we load
it too and run it from. Add a Kconfig item for this to remove some
hard-coding and allow this address to be more easily changed.
Signed-off-by: Andrew Davis <afd at ti.com>
---
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 4 ++--
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 4 ++--
arch/arm/dts/k3-binman.dtsi | 8 ++++----
arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi | 4 ++--
arch/arm/mach-k3/Kconfig | 7 +++++++
5 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index a723caa5805..cca0f44b7d8 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -105,8 +105,8 @@
arch = "arm64";
compression = "none";
os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
+ load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+ entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
tee-os {
filename = "tee-raw.bin";
};
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index 64318d09cf0..3a6db91e132 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -51,8 +51,8 @@
arch = "arm64";
compression = "none";
os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
+ load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+ entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
tee-os {
};
};
diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 758c8bf6ea1..621653e9471 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -286,8 +286,8 @@
arch = "arm64";
compression = "none";
os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
+ load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+ entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
ti-secure {
content = <&tee>;
keyfile = "custMpk.pem";
@@ -356,8 +356,8 @@
arch = "arm64";
compression = "none";
os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
+ load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+ entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
tee-os {
filename = "tee-raw.bin";
};
diff --git a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
index 017a5a722e0..ca99fa0e690 100644
--- a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
@@ -250,8 +250,8 @@
arch = "arm64";
compression = "none";
os = "tee";
- load = <0x9e800000>;
- entry = <0x9e800000>;
+ load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+ entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
tee-os {
filename = "tee-raw.bin";
};
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 0bd3f9fa12d..55bb874d9aa 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -129,6 +129,13 @@ config K3_ATF_LOAD_ADDR
The load address for the ATF image. This value is used to build the
FIT image header that places ATF in memory where it will run.
+config K3_OPTEE_LOAD_ADDR
+ hex "Load address of OPTEE image"
+ default 0x9e800000
+ help
+ The load address for the OPTEE image. This value defaults to 0x9e800000
+ if not provided in the board defconfig file.
+
config K3_DM_FW
bool "Separate DM firmware image"
depends on CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
--
2.39.2
More information about the U-Boot
mailing list