[PATCH v4 35/39] dts: dragonboard820c: use correct bindings for clocks

[Caleb Connolly]

Don't use hardcoded clock IDs, use the IDs from the dt-bindings to be
compatible with upstream.

Taken from kernel tag v6.7

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 arch/arm/dts/dragonboard820c.dts | 5 +++--
 drivers/clk/qcom/clock-apq8096.c | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/dragonboard820c.dts b/arch/arm/dts/dragonboard820c.dts
index 86b7f83d36d6..282c37e28f42 100644
--- a/arch/arm/dts/dragonboard820c.dts
+++ b/arch/arm/dts/dragonboard820c.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "skeleton64.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. DB820c";
@@ -78,7 +79,7 @@
 		blsp2_uart2: serial at 75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
-			clocks = <&gcc 4>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>;
 			clock-names = "core";
 			pinctrl-names = "uart";
 			pinctrl-0 = <&blsp8_uart>;
@@ -89,7 +90,7 @@
 			reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
 			index = <0x0>;
 			bus-width = <4>;
-			clock = <&gcc 0>;
+			clock = <&gcc GCC_SDCC1_APPS_CLK>;
 			clock-frequency = <200000000>;
 		 };
 
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index 1e6fdb5cd42d..a4731613c5e0 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
 
 #include "clock-qcom.h"
 
@@ -107,10 +108,10 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)
 	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
-	case 0: /* SDC1 */
+	case GCC_SDCC1_APPS_CLK: /* SDC1 */
 		return clk_init_sdc(priv, rate);
 		break;
-	case 4: /*UART2*/
+	case GCC_BLSP2_UART2_APPS_CLK: /*UART2*/
 		return clk_init_uart(priv);
 	default:
 		return 0;

-- 
2.43.1