[PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support
Primoz Fiser
primoz.fiser at norik.com
Thu Feb 1 06:32:04 CET 2024
Hi Mathieu,
Thanks for v4. I have no more remarks.
Also tested your v4 on the board.
Everything works, even eMMC booting which you were not able to test.
With that my Tested-by: can be applied.
Tested-by: Primoz Fiser <primoz.fiser at norik.com>
BR,
Primoz
On 30. 01. 24 15:50, Mathieu Othacehe wrote:
> Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
> the PHYTEC phyCORE-i.MX93 SoM.
>
> Supported features:
> - 1GB LPDDR4 RAM
> - eMMC
> - external SD
> - FEC Ethernet
> - debug UART
> - watchdog
>
> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
> ---
> Hello,
>
> This new revision fixes the remarks of Primoz. The configuration is now
> aligned on the savedefconfig output. The FEC Ethernet is also tested to be
> working if this patch is in:
>
> https://patchwork.ozlabs.org/project/uboot/patch/20240130124337.497748-1-primoz.fiser@norik.com/
>
> The proposed patch has been rebased on top of 6faba41.
>
> Thanks,
>
> Mathieu
>
> v3: https://lists.denx.de/pipermail/u-boot/2024-January/544493.html
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 293 ++++
> arch/arm/dts/imx93-phyboard-segin.dts | 117 ++
> arch/arm/dts/imx93-phycore-som.dtsi | 126 ++
> arch/arm/mach-imx/imx9/Kconfig | 6 +
> board/phytec/phycore_imx93/Kconfig | 13 +
> board/phytec/phycore_imx93/MAINTAINERS | 10 +
> board/phytec/phycore_imx93/Makefile | 14 +
> board/phytec/phycore_imx93/lpddr4_timing.c | 1546 +++++++++++++++++
> board/phytec/phycore_imx93/phycore-imx93.c | 42 +
> board/phytec/phycore_imx93/phycore_imx93.env | 73 +
> board/phytec/phycore_imx93/spl.c | 148 ++
> configs/imx93-phyboard-segin_defconfig | 138 ++
> doc/board/phytec/imx93-phyboard-segin.rst | 61 +
> doc/board/phytec/index.rst | 1 +
> include/configs/phycore_imx93.h | 28 +
> 16 files changed, 2618 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx93-phyboard-segin.dts
> create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
> create mode 100644 board/phytec/phycore_imx93/Kconfig
> create mode 100644 board/phytec/phycore_imx93/MAINTAINERS
> create mode 100644 board/phytec/phycore_imx93/Makefile
> create mode 100644 board/phytec/phycore_imx93/lpddr4_timing.c
> create mode 100644 board/phytec/phycore_imx93/phycore-imx93.c
> create mode 100644 board/phytec/phycore_imx93/phycore_imx93.env
> create mode 100644 board/phytec/phycore_imx93/spl.c
> create mode 100644 configs/imx93-phyboard-segin_defconfig
> create mode 100644 doc/board/phytec/imx93-phyboard-segin.rst
> create mode 100644 include/configs/phycore_imx93.h
>
<snip>
More information about the U-Boot
mailing list