[PATCH] doc: board: phytec: phycore-am62x: Update artifact names

Wadim Egorov w.egorov at phytec.de
Wed Feb 28 09:58:48 CET 2024


Use proper binary artifact names for HSFS devices.
Do not use the *_unsigned binaries.

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 doc/board/phytec/phycore-am62x.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index 1d641a78cf..bc6d524669 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -92,9 +92,9 @@ Assuming the uSD card is `/dev/mmcblk0`:
 To boot from a micro SD card on a HSFS device simply copy the following
 artifacts to the FAT partition:
 
-* tiboot3.bin from R5 build as tiboot3.bin
-* tispl.bin_unsigned from Cortex-A build as tispl.bin
-* u-boot.img_unsigned from Cortex-A build as u-boot.img
+* tiboot3.bin from R5 build
+* tispl.bin from Cortex-A build
+* u-boot.img from Cortex-A build
 
 Boot
 ----
-- 
2.34.1



More information about the U-Boot mailing list