[PATCH v3 0/2] arm: s5p4418: fix relocation
Minkyu Kang
promsoft at gmail.com
Mon Feb 5 10:35:07 CET 2024
Hi, Tom.
Could you please pick this patchset up?
2024년 1월 27일 (토) 05:03, Stefan Bosch <stefan_b at posteo.net>님이 작성:
>
> Fix relocation of u-boot for s5p4418-SoC. I.e. use __image_copy_start
> instead of _start to calculate the monitor length. Furthermore use an
> adapted version of relocate_vectors for the s5p4418-SoC. Background:
> The header (NSIH) used by the 2nd-bootloader (included at the begin of
> u-boot.bin) is not loaded into RAM. Therefore _start has to be after
> the header and therefore is not equal to __image_copy_start which is
> at the begin of the header.
>
> Changes in v3:
> - MICROBLAZE has not built anymore. Therefore do change calculation of
> gd->mon_len for ARCH_NEXELL only. This makes sure that MICROBLAZE and
> other ARM-boards are not affected.
>
> Changes in v2:
> - Cosmetic: Fix spelling mistake in commit message
>
> Stefan Bosch (2):
> common: board_f: change calculation of gd->mon_len to fix s5p4418
> reloc
> arm: s5p4418: fix relocation of vectors
>
> arch/arm/cpu/armv7/s5p4418/Makefile | 3 +++
> arch/arm/cpu/armv7/s5p4418/relocate.S | 24 ++++++++++++++++++++++++
> common/board_f.c | 4 +++-
> 3 files changed, 30 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/cpu/armv7/s5p4418/relocate.S
>
> --
> 2.17.1
>
Thanks.
Minkyu Kang.
More information about the U-Boot
mailing list