[PATCH] poplar: add myself as co-maintainer

[Yang Xiwen]

On 2/3/2024 5:45 PM, Yang Xiwen wrote:
> On 2/3/2024 4:32 PM, Jorge Ramirez-Ortiz, Gmail wrote:
>> On 03/02/24 07:54:22, Shawn Guo wrote:
>>> On Sat, Feb 3, 2024 at 5:44 AM Igor Opaniuk 
>>> <igor.opaniuk at foundries.io> wrote:
>>>>
>>>> Add myself as co-maintainer for Poplar board, as I'm currently
>>>> working on it (re-testing releases, addressing issues etc).
>>>>
>>>> CC: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz at gmail.com>
>>>> CC: Shawn Guo <shawn.guo at linaro.org>
>>>> Signed-off-by: Igor Opaniuk <igor.opaniuk at foundries.io>
>>>
>>> Acked-by: Shawn Guo <shawn.guo at linaro.org>
>>>
>>> I'm not actively working on poplar any more, so maybe remove me in 
>>> the meantime.
>>
>>
>> hi Igor,
>>
>> Yes please go ahead and thanks for offering.
>>
>> I'll sync with you later next week (I found my Poplar in storage, so 
>> maybe we cam improve things a little)
>> Also it would be good if we knew there are still users.
>>
>>
>> Acked-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz at gmail.com>
>>
> Hi, everyone. I'm working on a set-top box with a Hi3798MV200 SoC. It is 
> very similar to the Hi3798CV200 SoC and many peripherals and drivers can 
> be reused. I think you can try moving 
> arch/arm/include/asm/arch-hi3798cv200 to arch/arm/mach-histb and let's 
> maintain all HiSTB series SoCs/boards under it altogether? The same 
> thing also applies to TF-A. Currently upstream code refers to poplar 
> everywhere but actually the port is portable enough to handle a lot of 
> other Hi3798-series SoCs such as Hi3798MV2x, Hi3798MV3x etc..
There are some patches i sent pending for review. They are mostly 
originally sent just for Hi3798MV200, but the framework(such as 
drivers/clk/hisilicon) can be also used for poplar too. I hope you guys 
can take a look at them[1] and give your opinions about them(RBs and 
Acks are welcomed).

[1] HiSi clk framework: 
https://lore.kernel.org/u-boot/20240119-b4-hisi-clk-v1-0-279e38c95ca2@outlook.com/
>>>
>>> Shawn
>