[PATCH 1/5] msc_sm2s_imx8mp: Convert to DM_SERIAL
Fabio Estevam
festevam at gmail.com
Tue Feb 13 12:43:38 CET 2024
From: Fabio Estevam <festevam at denx.de>
The conversion to DM_SERIAL is mandatory, so do the conversion.
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi | 8 ++++++++
board/msc/sm2s_imx8mp/spl.c | 9 ---------
configs/msc_sm2s_imx8mp_defconfig | 1 +
include/configs/msc_sm2s_imx8mp.h | 2 --
4 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
index c398a743f7..1a7b530d9f 100644
--- a/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-msc-sm2s-u-boot.dtsi
@@ -63,3 +63,11 @@
&pmic {
bootph-pre-ram;
};
+
+&uart2 {
+ bootph-pre-ram;
+};
+
+&pinctrl_uart2 {
+ bootph-pre-ram;
+};
diff --git a/board/msc/sm2s_imx8mp/spl.c b/board/msc/sm2s_imx8mp/spl.c
index fed0fbcba1..ed7a1b7d3d 100644
--- a/board/msc/sm2s_imx8mp/spl.c
+++ b/board/msc/sm2s_imx8mp/spl.c
@@ -168,13 +168,6 @@ static const iomux_v3_cfg_t wdog_pads[] = {
MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
-
-static const iomux_v3_cfg_t ser0_pads[] = {
- MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
int board_early_init_f(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
@@ -182,8 +175,6 @@ int board_early_init_f(void)
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
- imx_iomux_v3_setup_multiple_pads(ser0_pads, ARRAY_SIZE(ser0_pads));
-
return 0;
}
diff --git a/configs/msc_sm2s_imx8mp_defconfig b/configs/msc_sm2s_imx8mp_defconfig
index bf1052db6f..9c27a72f8a 100644
--- a/configs/msc_sm2s_imx8mp_defconfig
+++ b/configs/msc_sm2s_imx8mp_defconfig
@@ -97,6 +97,7 @@ CONFIG_SPL_PMIC_RN5T567=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h
index c1c1fd5a78..3c7d96cb3c 100644
--- a/include/configs/msc_sm2s_imx8mp.h
+++ b/include/configs/msc_sm2s_imx8mp.h
@@ -55,8 +55,6 @@
#define PHYS_SDRAM_2 0xc0000000
#define PHYS_SDRAM_2_SIZE 0x0
-#define CFG_MXC_UART_BASE UART2_BASE_ADDR
-
#define CFG_SYS_FSL_USDHC_NUM 2
#define CFG_SYS_FSL_ESDHC_ADDR 0
--
2.34.1
More information about the U-Boot
mailing list