[PATCH v2 11/15] rockchip: rk3328: Sync device tree from linux v6.8-rc1
Jonas Karlman
jonas at kwiboo.se
Sat Feb 17 01:22:37 CET 2024
Sync rk3328 device tree from linux v6.8-rc1.
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v2:
- No change
---
arch/arm/dts/rk3328-evb.dts | 1 +
arch/arm/dts/rk3328-nanopi-r2s.dts | 3 +-
arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 4 +-
arch/arm/dts/rk3328-orangepi-r1-plus.dts | 1 +
arch/arm/dts/rk3328-roc-cc.dts | 3 +-
arch/arm/dts/rk3328-rock-pi-e.dts | 55 +++++++++++++++++
arch/arm/dts/rk3328-rock64.dts | 1 +
arch/arm/dts/rk3328-u-boot.dtsi | 6 --
arch/arm/dts/rk3328.dtsi | 64 +++++++++++++++-----
9 files changed, 112 insertions(+), 26 deletions(-)
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index ff6b466e0e07..1eef5504445f 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -11,6 +11,7 @@
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;
diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts b/arch/arm/dts/rk3328-nanopi-r2s.dts
index 3857d487ab84..a4399da7d8b1 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s.dts
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};
@@ -34,7 +35,7 @@
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- a/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ motorcomm,auto-sleep-disabled;
motorcomm,clk-out-frequency-hz = <125000000>;
motorcomm,keep-pll-enabled;
- motorcomm,auto-sleep-disabled;
+ motorcomm,rx-clk-drv-microamp = <5020>;
+ motorcomm,rx-data-drv-microamp = <5020>;
pinctrl-0 = <ð_phy_reset_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus.dts b/arch/arm/dts/rk3328-orangepi-r1-plus.dts
index dc83d74045a3..f20662929c77 100644
--- a/arch/arm/dts/rk3328-orangepi-r1-plus.dts
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};
diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts
index aa22a0c22265..414897a57e75 100644
--- a/arch/arm/dts/rk3328-roc-cc.dts
+++ b/arch/arm/dts/rk3328-roc-cc.dts
@@ -11,6 +11,7 @@
compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
@@ -96,7 +97,6 @@
linux,default-trigger = "heartbeat";
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
default-state = "on";
- mode = <0x23>;
};
user_led: led-1 {
@@ -104,7 +104,6 @@
linux,default-trigger = "mmc1";
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
default-state = "off";
- mode = <0x05>;
};
};
};
diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts
index 018a3a5075c7..3cda6c627b68 100644
--- a/arch/arm/dts/rk3328-rock-pi-e.dts
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -21,6 +21,8 @@
compatible = "radxa,rockpi-e", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
+ ethernet1 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
@@ -180,6 +182,59 @@
status = "okay";
};
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_D0 - D7 */
+ "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_D0 - D7 */
+ "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+ "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+ "pin-33 [GPIO2_A6]", "",
+ /* GPIO2_B0 - B7 */
+ "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+ "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+ "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+ "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+ /* GPIO3_B0 - B7 */
+ "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
status = "okay";
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
index 0a27fa5271f5..229fe9da9c2d 100644
--- a/arch/arm/dts/rk3328-rock64.dts
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -11,6 +11,7 @@
compatible = "pine64,rock64", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi
index ea34bf6b78bb..a030f1a5e51d 100644
--- a/arch/arm/dts/rk3328-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-u-boot.dtsi
@@ -26,12 +26,6 @@
0x0 0xff720000 0x0 0x1000
0x0 0xff798000 0x0 0x1000>;
};
-
- rng: rng at ff060000 {
- compatible = "rockchip,rk3328-crypto";
- reg = <0x0 0xff060000 0x0 0x4000>;
- status = "okay";
- };
};
&cru {
diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi
index e8d8f00be8aa..fe81b97bbe78 100644
--- a/arch/arm/dts/rk3328.dtsi
+++ b/arch/arm/dts/rk3328.dtsi
@@ -20,6 +20,10 @@
#size-cells = <2>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -27,8 +31,6 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
- ethernet0 = &gmac2io;
- ethernet1 = &gmac2phy;
};
cpus {
@@ -102,10 +104,12 @@
l2: l2-cache0 {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
};
};
- cpu0_opp_table: opp_table0 {
+ cpu0_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -306,6 +310,10 @@
};
power-domain at RK3328_PD_VIDEO {
reg = <RK3328_PD_VIDEO>;
+ clocks = <&cru ACLK_RKVDEC>,
+ <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
#power-domain-cells = <0>;
};
power-domain at RK3328_PD_VPU {
@@ -489,7 +497,7 @@
status = "disabled";
};
- dmac: dmac at ff1f0000 {
+ dmac: dma-controller at ff1f0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff1f0000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -599,7 +607,7 @@
gpu: gpu at ff300000 {
compatible = "rockchip,rk3328-mali", "arm,mali-450";
- reg = <0x0 0xff300000 0x0 0x40000>;
+ reg = <0x0 0xff300000 0x0 0x30000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
@@ -623,7 +631,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff330200 0 0x100>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "h265e_mmu";
clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
@@ -634,7 +641,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff340800 0x0 0x40>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vepu_mmu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
@@ -656,22 +662,34 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff350800 0x0 0x40>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
power-domains = <&power RK3328_PD_VPU>;
};
- rkvdec_mmu: iommu at ff360480 {
+ vdec: video-codec at ff360000 {
+ compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
+ reg = <0x0 0xff360000 0x0 0x480>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
+ assigned-clock-rates = <400000000>, <400000000>, <300000000>;
+ iommus = <&vdec_mmu>;
+ power-domains = <&power RK3328_PD_VIDEO>;
+ };
+
+ vdec_mmu: iommu at ff360480 {
compatible = "rockchip,iommu";
reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "rkvdec_mmu";
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
- status = "disabled";
+ power-domains = <&power RK3328_PD_VIDEO>;
};
vop: vop at ff370000 {
@@ -700,7 +718,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vop_mmu";
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
@@ -901,6 +918,8 @@
resets = <&cru SRST_GMAC2IO_A>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
status = "disabled";
};
@@ -923,6 +942,8 @@
reset-names = "stmmaceth";
phy-mode = "rmii";
phy-handle = <&phy>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
clock_in_out = "output";
status = "disabled";
@@ -1021,6 +1042,17 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ crypto: crypto at ff060000 {
+ compatible = "rockchip,rk3328-crypto";
+ reg = <0x0 0xff060000 0x0 0x4000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>,
+ <&cru SCLK_CRYPTO>;
+ clock-names = "hclk_master", "hclk_slave", "sclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3328-pinctrl";
rockchip,grf = <&grf>;
@@ -1028,7 +1060,7 @@
#size-cells = <2>;
ranges;
- gpio0: gpio0 at ff210000 {
+ gpio0: gpio at ff210000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff210000 0x0 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -1041,7 +1073,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1 at ff220000 {
+ gpio1: gpio at ff220000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff220000 0x0 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -1054,7 +1086,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2 at ff230000 {
+ gpio2: gpio at ff230000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff230000 0x0 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -1067,7 +1099,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3 at ff240000 {
+ gpio3: gpio at ff240000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff240000 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
--
2.43.0
More information about the U-Boot
mailing list