[PATCH v2 06/15] rockchip: rk3328-nanopi-r2: Update defconfig
Tianling Shen
cnsztl at gmail.com
Sat Feb 17 07:21:38 CET 2024
Hi Jonas,
On Sat, Feb 17, 2024 at 8:23 AM Jonas Karlman <jonas at kwiboo.se> wrote:
>
> Update defconfig for rk3328-nanopi-r2* boards with new defaults.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
>
> Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
> of FIT images. This help indicate if there is an issue loading any of
> the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep
> support for scripts.
>
> Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is
> not included in the SPL fdt.
>
> Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator
> commands.
>
> Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and
> eth1addr is set based on cpuid read from eFUSE.
>
> Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL.
>
> Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove
> &gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y
> to ensure device tree props is used by motorcomm PHY driver.
>
> Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used.
>
> Add DM_REGULATOR_GPIO=y and SPL_DM_REGULATOR_GPIO=y to support the
> regulator-gpio compatible.
>
> Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random
> generator.
>
> Also add missing device tree files to MAINTAINERS file.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Tianling Shen <cnsztl at gmail.com>
Thanks,
Tianling.
> ---
> v2:
> - Add CMD_GPIO, CMD_REGULATOR, DM_MDIO, PHY_GIGE, DM_REGULATOR_GPIO and
> SPL_DM_REGULATOR_GPIO
> - Remove SPL_I2C, SPL_PMIC_RK8XX and REGULATOR_PWM
> ---
> arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 6 ------
> board/rockchip/evb_rk3328/MAINTAINERS | 2 ++
> configs/nanopi-r2c-plus-rk3328_defconfig | 20 +++++++++++++++-----
> configs/nanopi-r2c-rk3328_defconfig | 20 +++++++++++++++-----
> configs/nanopi-r2s-rk3328_defconfig | 20 +++++++++++++++-----
> doc/board/rockchip/rockchip.rst | 3 +++
> 6 files changed, 50 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> index d969b008775e..0a1152e8b52d 100644
> --- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
> @@ -27,9 +27,3 @@
> &vcc_sd {
> bootph-pre-ram;
> };
> -
> -&gmac2io {
> - snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - snps,reset-delays-us = <0 10000 50000>;
> -};
> diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS
> index 47fd05d2ea8b..b88727acad26 100644
> --- a/board/rockchip/evb_rk3328/MAINTAINERS
> +++ b/board/rockchip/evb_rk3328/MAINTAINERS
> @@ -11,12 +11,14 @@ NANOPI-R2C-RK3328
> M: Tianling Shen <cnsztl at gmail.com>
> S: Maintained
> F: configs/nanopi-r2c-rk3328_defconfig
> +F: arch/arm/dts/rk3328-nanopi-r2c.dts
> F: arch/arm/dts/rk3328-nanopi-r2c-u-boot.dtsi
>
> NANOPI-R2C-PLUS-RK3328
> M: Tianling Shen <cnsztl at gmail.com>
> S: Maintained
> F: configs/nanopi-r2c-plus-rk3328_defconfig
> +F: arch/arm/dts/rk3328-nanopi-r2c-plus.dts
> F: arch/arm/dts/rk3328-nanopi-r2c-plus-u-boot.dtsi
>
> NANOPI-R2S-RK3328
> diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
> index 320ed8b434a8..7a7b0342629f 100644
> --- a/configs/nanopi-r2c-plus-rk3328_defconfig
> +++ b/configs/nanopi-r2c-plus-rk3328_defconfig
> @@ -15,7 +15,6 @@ CONFIG_ROCKCHIP_RK3328=y
> CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
> CONFIG_TPL_LIBCOMMON_SUPPORT=y
> CONFIG_TPL_LIBGENERIC_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC=y
> CONFIG_SPL_STACK_R_ADDR=0x600000
> CONFIG_SPL_STACK=0x400000
> CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
> @@ -26,7 +25,9 @@ CONFIG_DEBUG_UART=y
> # CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2c-plus.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> @@ -39,17 +40,18 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_I2C=y
> CONFIG_SPL_POWER=y
> CONFIG_SPL_ATF=y
> CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> +CONFIG_CMD_REGULATOR=y
> CONFIG_SPL_OF_CONTROL=y
> CONFIG_TPL_OF_CONTROL=y
> CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -57,8 +59,8 @@ CONFIG_TPL_OF_PLATDATA=y
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_SYS_MMC_ENV_DEV=1
> -CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_TPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_REGMAP=y
> CONFIG_SPL_REGMAP=y
> CONFIG_TPL_REGMAP=y
> @@ -72,8 +74,14 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MISC=y
> +CONFIG_ROCKCHIP_EFUSE=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_MOTORCOMM=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_PHY_GIGE=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> @@ -81,16 +89,18 @@ CONFIG_PINCTRL=y
> CONFIG_SPL_PINCTRL=y
> CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> -CONFIG_SPL_PMIC_RK8XX=y
> CONFIG_SPL_DM_REGULATOR=y
> -CONFIG_REGULATOR_PWM=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> CONFIG_RAM=y
> CONFIG_SPL_RAM=y
> CONFIG_TPL_RAM=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYS_NS16550_MEM32=y
> diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
> index 583179d7c548..becad021f95d 100644
> --- a/configs/nanopi-r2c-rk3328_defconfig
> +++ b/configs/nanopi-r2c-rk3328_defconfig
> @@ -15,7 +15,6 @@ CONFIG_ROCKCHIP_RK3328=y
> CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
> CONFIG_TPL_LIBCOMMON_SUPPORT=y
> CONFIG_TPL_LIBGENERIC_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC=y
> CONFIG_SPL_STACK_R_ADDR=0x600000
> CONFIG_SPL_STACK=0x400000
> CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
> @@ -26,7 +25,9 @@ CONFIG_DEBUG_UART=y
> # CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2c.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> @@ -39,17 +40,18 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_I2C=y
> CONFIG_SPL_POWER=y
> CONFIG_SPL_ATF=y
> CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> +CONFIG_CMD_REGULATOR=y
> CONFIG_SPL_OF_CONTROL=y
> CONFIG_TPL_OF_CONTROL=y
> CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -57,8 +59,8 @@ CONFIG_TPL_OF_PLATDATA=y
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_SYS_MMC_ENV_DEV=1
> -CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_TPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_REGMAP=y
> CONFIG_SPL_REGMAP=y
> CONFIG_TPL_REGMAP=y
> @@ -72,8 +74,14 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MISC=y
> +CONFIG_ROCKCHIP_EFUSE=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_MOTORCOMM=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_PHY_GIGE=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> @@ -81,16 +89,18 @@ CONFIG_PINCTRL=y
> CONFIG_SPL_PINCTRL=y
> CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> -CONFIG_SPL_PMIC_RK8XX=y
> CONFIG_SPL_DM_REGULATOR=y
> -CONFIG_REGULATOR_PWM=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> CONFIG_RAM=y
> CONFIG_SPL_RAM=y
> CONFIG_TPL_RAM=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYS_NS16550_MEM32=y
> diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
> index f7ed71e41228..fc910b9d03c9 100644
> --- a/configs/nanopi-r2s-rk3328_defconfig
> +++ b/configs/nanopi-r2s-rk3328_defconfig
> @@ -15,7 +15,6 @@ CONFIG_ROCKCHIP_RK3328=y
> CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
> CONFIG_TPL_LIBCOMMON_SUPPORT=y
> CONFIG_TPL_LIBGENERIC_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC=y
> CONFIG_SPL_STACK_R_ADDR=0x600000
> CONFIG_SPL_STACK=0x400000
> CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
> @@ -26,7 +25,9 @@ CONFIG_DEBUG_UART=y
> # CONFIG_ANDROID_BOOT_IMAGE is not set
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> @@ -39,17 +40,18 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_I2C=y
> CONFIG_SPL_POWER=y
> CONFIG_SPL_ATF=y
> CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> +CONFIG_CMD_REGULATOR=y
> CONFIG_SPL_OF_CONTROL=y
> CONFIG_TPL_OF_CONTROL=y
> CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -57,8 +59,8 @@ CONFIG_TPL_OF_PLATDATA=y
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_SYS_MMC_ENV_DEV=1
> -CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_TPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_REGMAP=y
> CONFIG_SPL_REGMAP=y
> CONFIG_TPL_REGMAP=y
> @@ -72,8 +74,14 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MISC=y
> +CONFIG_ROCKCHIP_EFUSE=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_MOTORCOMM=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_PHY_GIGE=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> @@ -81,16 +89,18 @@ CONFIG_PINCTRL=y
> CONFIG_SPL_PINCTRL=y
> CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> -CONFIG_SPL_PMIC_RK8XX=y
> CONFIG_SPL_DM_REGULATOR=y
> -CONFIG_REGULATOR_PWM=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> CONFIG_RAM=y
> CONFIG_SPL_RAM=y
> CONFIG_TPL_RAM=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYS_NS16550_MEM32=y
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index becd0bfe801d..5f613e7462e5 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -61,6 +61,9 @@ List of mainline supported Rockchip boards:
> * rk3328
> - Rockchip Evb-RK3328 (evb-rk3328)
> - Firefly ROC-RK3328-CC (roc-cc-rk3328)
> + - FriendlyElec NanoPi R2C (nanopi-r2c-rk3328)
> + - FriendlyElec NanoPi R2C Plus (nanopi-r2c-plus-rk3328)
> + - FriendlyElec NanoPi R2S (nanopi-r2s-rk3328)
> - Pine64 Rock64 (rock64-rk3328)
> - Radxa ROCK Pi E (rock-pi-e-rk3328)
> * rk3368
> --
> 2.43.0
>
More information about the U-Boot
mailing list