[PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY

Marek Vasut marex at denx.de
Mon Feb 26 09:42:06 CET 2024


On 2/26/24 9:04 AM, Sumit Garg wrote:
> Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe
> PHY initialization moved to this standalone PHY driver.
> 
> Inspired from counterpart Linux kernel v6.8-rc3 driver:
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c.

Commit ID , see previous comments.

[...]

> +static int imx8_pcie_phy_probe(struct udevice *dev)
> +{
> +	struct imx8_pcie_phy *imx8_phy = dev_get_priv(dev);
> +	ofnode gpr;
> +	int ret = 0;
> +
> +	imx8_phy->drvdata = (void *)dev_get_driver_data(dev);
> +	imx8_phy->base = dev_read_addr(dev);
> +	if (!imx8_phy->base)
> +		return -EINVAL;
> +
> +	/* get PHY refclk pad mode */
> +	dev_read_u32(dev, "fsl,refclk-pad-mode", &imx8_phy->refclk_pad_mode);
> +
> +	if (dev_read_u32(dev, "fsl,tx-deemph-gen1", &imx8_phy->tx_deemph_gen1))
> +		imx8_phy->tx_deemph_gen1 = 0;

Use dev_read_u32_default() and you won't need the if (...)

> +	if (dev_read_u32(dev, "fsl,tx-deemph-gen2", &imx8_phy->tx_deemph_gen2))
> +		imx8_phy->tx_deemph_gen2 = 0;
> +
> +	if (dev_read_bool(dev, "fsl,clkreq-unsupported"))
> +		imx8_phy->clkreq_unused = true;
> +	else
> +		imx8_phy->clkreq_unused = false;
> +
> +	/* Grab GPR config register range */
> +	gpr = ofnode_by_compatible(ofnode_null(), imx8_phy->drvdata->gpr);
> +	if (ofnode_equal(gpr, ofnode_null())) {
> +		dev_err(dev, "unable to find GPR node\n");
> +		return -ENODEV;
> +	}
> +
> +	imx8_phy->iomuxc_gpr = syscon_node_to_regmap(gpr);
> +	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
> +		dev_err(dev, "unable to find iomuxc registers\n");
> +		return PTR_ERR(imx8_phy->iomuxc_gpr);
> +	}
> +
> +	ret = clk_get_by_name(dev, "ref", &imx8_phy->hsio_clk);
> +	if (ret) {
> +		dev_err(dev, "Failed to get PCIEPHY ref clock\n");
> +		return ret;
> +	}
> +
> +	ret = reset_get_by_name(dev, "pciephy", &imx8_phy->reset);
> +	if (ret) {
> +		dev_err(dev, "Failed to get PCIEPHY reset control\n");
> +		return ret;
> +	}

Some clk_put() and co. fail path is missing here. Also .remove is missing .


More information about the U-Boot mailing list