[PATCH] rockchip: rock64: store env in SPI flash

[Ben Wolsieffer]

Currently, U-Boot attempts to store the environment in MMC 0, which
doesn't work when an eMMC is used without an SD card. There is an SPI
flash chip on the board, so use that instead which should work in all
cases. Additionally, this brings the Rock64 into line with the
RockPro64.

Signed-off-by: Ben Wolsieffer <benwolsieffer at gmail.com>
---
 configs/rock64-rk3328_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 0297d09876..589e5184ca 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
 CONFIG_DM_RESET=y
@@ -54,7 +55,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_TPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_TPL_OF_PLATDATA=y
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_NET_RANDOM_ETHADDR=y
-- 
2.43.2