[PATCH v3 11/13] Makefile: remove hardcoded device tree source directory

[Neha Malcom Francis]

Hi Bryan

On 27/02/24 02:49, Bryan Brattlof wrote:
> Some boards that choose to utilize the OF_UPSTREAM directory for their
> device tree files will need to specify that directory instead of the
> traditional arch/$(ARCH)/dts/* path.
> 
> Include the correct path to the board's dtbs depending on if OF_UPSTREAM
> is selected or not.
> 
> Reviewed-by: Sumit Garg <sumit.garg at linaro.org>
> Signed-off-by: Bryan Brattlof <bb at ti.com>
> ---
>   Makefile             | 18 ++++++++++++++----
>   scripts/Makefile.spl | 17 +++++++++++++----
>   2 files changed, 27 insertions(+), 8 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 0f0c7f30d2717..51b57d26857f1 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1184,6 +1184,16 @@ dt_binding_check: scripts_dtc
>   quiet_cmd_copy = COPY    $@
>         cmd_copy = cp $< $@
>   
> +ifeq ($(CONFIG_OF_UPSTREAM),y)
> +ifeq ($(CONFIG_ARM64),y)

This would fail in case of R5 builds, is there any reason why you choose not to 
use OF_UPSTREAM for R5 builds?

I understand that R5 builds will require U-Boot DTS (from U-Boot code base) that 
(ideally) should inherit the kernel core DTS (from upstream), is this support 
not there at present? Let me know if I understand incorrectly.

> +dt_dir := dts/upstream/src/arm64
> +else
> +dt_dir := dts/upstream/src/$(ARCH)
> +endif
> +else
> +dt_dir := arch/$(ARCH)/dts
> +endif
> +
>   ifeq ($(CONFIG_MULTI_DTB_FIT),y)
>   
>   ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
> @@ -1209,7 +1219,7 @@ endif
>   
>   MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
>   	-a 0 -e 0 -E \
> -	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
> +	$(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
>   
>   MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
>   
> @@ -1407,9 +1417,9 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
>   	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
>   	-p $(CONFIG_FIT_EXTERNAL_OFFSET) \
>   	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
> -	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
> -	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
> -	$(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
> +	$(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(DEVICE_TREE))) \
> +	$(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
> +	$(patsubst %,-b $(dt_dir)/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
>   else
>   MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
>   	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
> index 407fc52376a50..d074ba2350065 100644
> --- a/scripts/Makefile.spl
> +++ b/scripts/Makefile.spl
> @@ -559,9 +559,15 @@ FORCE:
>   $(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
>   	$(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
>   
> -PHONY += dts_dir
> -dts_dir:
> -	$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
> +ifeq ($(CONFIG_OF_UPSTREAM),y)
> +ifeq ($(CONFIG_ARM64),y)
> +dt_dir := dts/upstream/src/arm64
> +else
> +dt_dir := dts/upstream/src/$(ARCH)
> +endif
> +else
> +dt_dir := arch/$(ARCH)/dts
> +endif
>   
>   # Declare the contents of the .PHONY variable as phony.  We keep that
>   # information in a variable so we can use it in if_changed and friends.
> @@ -569,8 +575,11 @@ dts_dir:
>   
>   SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
>   SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
> +$(dir $(SHRUNK_ARCH_DTB)):
> +	$(shell [ -d $@ ] || mkdir -p $@)
> +
>   .SECONDEXPANSION:
> -$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
> +$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, $(dt_dir)/%, $$@) $(dir $(SHRUNK_ARCH_DTB))
>   	$(call if_changed,fdtgrep)
>   
>   targets += $(SPL_OF_LIST_TARGETS)
> 

-- 
Thanking You
Neha Malcom Francis