[PATCH v3 27/36] dts: msm8916: replace with upstream DTS
Sumit Garg
sumit.garg at linaro.org
Fri Feb 2 09:38:12 CET 2024
On Tue, 30 Jan 2024 at 19:35, Caleb Connolly <caleb.connolly at linaro.org> wrote:
>
> Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
> msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
> support.
>
> Taken from kernel tag v6.7
>
> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
> arch/arm/dts/Makefile | 2 +-
> arch/arm/dts/apq8016-sbc-u-boot.dtsi | 11 +
> arch/arm/dts/apq8016-sbc.dts | 729 +++++++++
> arch/arm/dts/dragonboard410c-uboot.dtsi | 44 -
> arch/arm/dts/dragonboard410c.dts | 221 ---
> arch/arm/dts/msm8916.dtsi | 2702 +++++++++++++++++++++++++++++++
> configs/dragonboard410c_defconfig | 2 +-
> 7 files changed, 3444 insertions(+), 267 deletions(-)
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 92a4465f5f41..4c8b29b983a4 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -628,7 +628,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
>
> dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
>
> -dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
> +dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \
> dragonboard820c.dtb \
> sdm845-db845c.dtb \
> sdm845-samsung-starqltechn.dtb \
> diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> new file mode 100644
> index 000000000000..838e629a8ade
> --- /dev/null
> +++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024, Linaro Ltd.
> + */
> +
> +/ {
> + /* When running as a first-stage bootloader this isn't filled in automatically */
> + memory at 80000000 {
> + reg = <0 0x80000000 0 0x3da00000>;
> + };
> +};
With U-Boot booting as the first stage bootloader, we have to enable
the serial driver prior to relocation. Although we have
DM_FLAG_PRE_RELOC for clock and the serial driver, what about the
pinctrl driver required to configure UART specific pins prior to
relocation? Without following change we get broken U-Boot log without
header prints:
diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
index 838e629a8ade..0a21732be6cb 100644
--- a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
+++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
@@ -9,3 +9,11 @@
reg = <0 0x80000000 0 0x3da00000>;
};
};
+
+&tlmm {
+ bootph-all;
+
+ blsp-uart2-default-state {
+ bootph-all;
+ };
+};
Fixes broken U-Boot log:
S - Flash Throughput, 82000 KB/s (1503304 Bytes, 18330 us)
S - DDR Frequency, 400 MHz
Core: 135 devices, 20 uclasses, devicetree: board
MMC: mmc at 7824900: 0, mmc at 7864900: 1
Loading Environment from MMC... OK
In: serial at 78b0000
Out: serial at 78b0000
Err: serial at 78b0000
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
Net: No ethernet found.
Hit any key to stop autoboot: 0
dragonboard410c =>
-Sumit
More information about the U-Boot
mailing list