[PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting

[Fabio Estevam]

On Fri, Feb 9, 2024 at 3:27 PM Jesse T <mr.bossman075 at gmail.com> wrote:

> These errors also happen on master.

There are no errors in master, otherwise they would not pass the CI build.

> I will submit a patch to fix these soon.

Just to clarify: on master we do get the following warnings (not errors):

arch/arm/dts/imxrt1170-evk.dtb: Warning (reg_format):
/memory/ocram at 20240000:reg: property has invalid length (8 bytes)
(#address-cells == 2, #size-cells == 1)
arch/arm/dts/imxrt1170-evk.dtb: Warning (reg_format):
/memory/sdram at 80000000:reg: property has invalid length (8 bytes)
(#address-cells == 2, #size-cells == 1)
arch/arm/dts/imxrt1170-evk.dtb: Warning (avoid_default_addr_size):
/memory/ocram at 20240000: Relying on default #address-cells value
arch/arm/dts/imxrt1170-evk.dtb: Warning (avoid_default_addr_size):
/memory/ocram at 20240000: Relying on default #size-cells value
arch/arm/dts/imxrt1170-evk.dtb: Warning (avoid_default_addr_size):
/memory/sdram at 80000000: Relying on default #address-cells value
arch/arm/dts/imxrt1170-evk.dtb: Warning (avoid_default_addr_size):
/memory/sdram at 80000000: Relying on default #size-cells value
  SHIPPED dts/dt.dtb

The error I was referring to was:

make imxrt1020-evk_defconfig
make
1221+binman: Device tree 'u-boot.dtb' does not have a 'binman' node
1222+make[1]: *** [Makefile:1125: .binman_stamp] Error 1
1223+make: *** [Makefile:177: sub-make] Error 2

If you can fix both the warnings and the errors, that would be great.

Thanks