[PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc

Roger Quadros rogerq at kernel.org
Mon Feb 5 11:06:29 CET 2024



On 02/02/2024 18:40, Anwar, Md Danish wrote:
> Hi Roger,
> 
> On 2/2/2024 4:49 PM, Roger Quadros wrote:
>>
>>
>> On 30/01/2024 08:33, MD Danish Anwar wrote:
>>> Add APIs to set a firmware_name to a rproc and boot the rproc with the
>>> same firmware.
>>>
>>> Clients can call rproc_set_firmware() API to set firmware_name for a rproc
>>> whereas rproc_boot() will load the firmware set by rproc_set_firmware() to
>>> a buffer by calling request_firmware_into_buf(). rproc_boot() will then
>>> load the firmware file to the remote processor and start the remote
>>> processor.
>>>
>>> Also include "fs-loader.h" and make remoteproc driver select FS_LOADER in
>>> Kconfig so that we can call request_firmware_into_buf() from remoteproc
>>> driver.
>>>
>>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>>> ---
>>> Changes from v3 to v4:
>>> *) No functional change. Splitted the patch out of the series as suggested
>>>    by Nishant.
>>> *) Droppped the RFC tag.
>>>
>>> v3: https://lore.kernel.org/all/20240124064930.1787929-4-danishanwar@ti.com/
>>>
>>>  drivers/remoteproc/Kconfig        |  1 +
>>>  drivers/remoteproc/rproc-uclass.c | 85 +++++++++++++++++++++++++++++++
>>>  include/remoteproc.h              | 35 +++++++++++++
>>>  3 files changed, 121 insertions(+)
>>>
>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>>> index 781de530af..0fdf1b38ea 100644
>>> --- a/drivers/remoteproc/Kconfig
>>> +++ b/drivers/remoteproc/Kconfig
>>> @@ -10,6 +10,7 @@ menu "Remote Processor drivers"
>>>  # All users should depend on DM
>>>  config REMOTEPROC
>>>  	bool
>>> +	select FS_LOADER
>>>  	depends on DM
>>>  
>>>  # Please keep the configuration alphabetically sorted.
>>> diff --git a/drivers/remoteproc/rproc-uclass.c b/drivers/remoteproc/rproc-uclass.c
>>> index 28b362c887..76db4157f7 100644
>>> --- a/drivers/remoteproc/rproc-uclass.c
>>> +++ b/drivers/remoteproc/rproc-uclass.c
>>> @@ -13,6 +13,7 @@
>>>  #include <log.h>
>>>  #include <malloc.h>
>>>  #include <virtio_ring.h>
>>> +#include <fs_loader.h>
>>>  #include <remoteproc.h>
>>>  #include <asm/io.h>
>>>  #include <dm/device-internal.h>
>>> @@ -961,3 +962,87 @@ unsigned long rproc_parse_resource_table(struct udevice *dev, struct rproc *cfg)
>>>  
>>>  	return 1;
>>>  }
>>> +
>>> +int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name)
>>> +{
>>> +	struct dm_rproc_uclass_pdata *uc_pdata;
>>> +	int len;
>>> +	char *p;
>>> +
>>> +	if (!rproc_dev || !fw_name)
>>> +		return -EINVAL;
>>> +
>>> +	uc_pdata = dev_get_uclass_plat(rproc_dev);
>>
>> This can return NULL and you shuould error out if it does.
>>
> 
> Sure.
> 
>>> +
>>> +	len = strcspn(fw_name, "\n");
>>> +	if (!len) {
>>> +		debug("can't provide empty string for firmware name\n");
>>
>> how about "invalid filename" ?
>>
> 
> Sure.
> 
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	p = strndup(fw_name, len);
>>> +	if (!p)
>>> +		return -ENOMEM;
>>> +
>>> +	uc_pdata->fw_name = p;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +int rproc_boot(struct udevice *rproc_dev, size_t fw_size)
>>> +{
>>> +	struct dm_rproc_uclass_pdata *uc_pdata;
>>> +	struct udevice *fs_loader;
>>> +	void *addr = malloc(fw_size);
>>
>> I will suggest to do malloc just before you need the buffer.
>> You need to free up the buffer an all return paths after that.
>>
> 
> That is correct. I will do malloc just before calling
> request_firmware_into_buf() API.
> 
>>> +	int core_id, ret = 0;
>>> +	char *firmware;
>>> +	ulong rproc_addr;
>>
>> do you really need rproc_addr? You could use addr itself.
>>
> 
> Sure.
> 
>>> +
>>> +	if (!rproc_dev)
>>> +		return -EINVAL;
>>> +
>>> +	if (!addr)
>>> +		return -ENOMEM;
>>> +
>>> +	uc_pdata = dev_get_uclass_plat(rproc_dev);
>>> +	core_id = dev_seq(rproc_dev);
>>> +	firmware = uc_pdata->fw_name;
>>> +
>>> +	if (!firmware) {
>>> +		debug("No firmware set for rproc core %d\n", core_id);
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	/* Initialize all rproc cores */
>>> +	rproc_init();
>>
>> 	if (!rproc_is_initialized()) {
>> 		ret = rproc_init()
>> 		if (ret) {
>> 			debug("rproc_init() failed: %d\n", ret);
>> 			return ret;
>> 		}
>> 	}
>>
> 
> Sure.
> 
>>> +
>>> +	/* Loading firmware to a given address */
>>> +	ret = get_fs_loader(&fs_loader);
>>> +	if (ret) {
>>> +		debug("could not get fs loader: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = request_firmware_into_buf(fs_loader, firmware, addr, fw_size, 0);
>>> +	if (ret < 0) {
>>> +		debug("could not request %s: %d\n", firmware, ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	rproc_addr = (ulong)addr;
>>> +
>>> +	ret = rproc_load(core_id, rproc_addr, ret);
>>
>> ret = rproc_load(coare_id, (ulong)addr, ret);
>>
>>> +	if (ret) {
>>> +		debug("failed to load %s to rproc core %d from addr 0x%08lX err %d\n",
>>> +		      uc_pdata->fw_name, core_id, rproc_addr, ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = rproc_start(core_id);
>>> +	if (ret) {
>>> +		debug("failed to start rproc core %d\n", core_id);
>>> +		return ret;
>>> +	}
>>> +
>>> +	return ret;
>>
>> return 0;
>>
>>> +}
>>> diff --git a/include/remoteproc.h b/include/remoteproc.h
>>> index 91a88791a4..e53f85ba51 100644
>>> --- a/include/remoteproc.h
>>> +++ b/include/remoteproc.h
>>> @@ -403,6 +403,7 @@ enum rproc_mem_type {
>>>   * @name: Platform-specific way of naming the Remote proc
>>>   * @mem_type: one of 'enum rproc_mem_type'
>>>   * @driver_plat_data: driver specific platform data that may be needed.
>>> + * @fw_name: firmware name
>>>   *
>>>   * This can be accessed with dev_get_uclass_plat() for any UCLASS_REMOTEPROC
>>>   * device.
>>> @@ -412,6 +413,7 @@ struct dm_rproc_uclass_pdata {
>>>  	const char *name;
>>>  	enum rproc_mem_type mem_type;
>>>  	void *driver_plat_data;
>>> +	char *fw_name;
>>>  };
>>>  
>>>  /**
>>> @@ -705,6 +707,35 @@ unsigned long rproc_parse_resource_table(struct udevice *dev,
>>>  struct resource_table *rproc_find_resource_table(struct udevice *dev,
>>>  						 unsigned int addr,
>>>  						 int *tablesz);
>>> +/**
>>> + * rproc_set_firmware() - assign a new firmware
>>
>> firmware/firmware name.
>>
>>> + * @rproc_dev: device for wich new firmware is being assigned
>>
>> firmware/firmware name
>> wich/which
>>
>>> + * @fw_name: new firmware name to be assigned
>>> + *
>>> + * This function allows remoteproc drivers or clients to configure a custom
>>> + * firmware name. The function does not trigger a remote processor boot,
>>> + * only sets the firmware name used for a subsequent boot.
>>> + *
>>> + * This function sets the fw_name field in uclass pdata of the Remote proc
>>> + *
>>> + * Return: 0 on success or a negative value upon failure
>>> + */
>>> +int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name);
>>> +
>>> +/**
>>> + * rproc_boot() - boot a remote processor
>>> + * @rproc_dev: rproc device to boot
>>> + * @fw_size: Size of the memory to allocate for firmeware
>>
>> firmeware/firmware
>>
> 
> I'll fix all these typos.
> 
>> How does caller know what firmware size to set to?
>> This should already be private to the rproc as it knows 
>> how large is its program memory.
>>
> 
> Caller is trying to boot the rproc with a firmware binary. Caller should
> know the size of binary that it wants to load to rproc core. Caller will
> specify the binary size to rproc_boot(). Based on the size provided by
> caller, rproc_boot() will then allocate that much memory and call
> request_firmware_into_buf() with the size and allocated buffer. If the
> caller doesn't provide minimum size rproc_load() will fail.

Caller only knows the filename. It need not know more details.
Also see my comment below about rproc_boot() API.

> 
> rproc_load() calls respective driver ops, for example: pru_load().
> pru_load() [1] API checks the required size of firmware to load by
> casting the buffer into Elf32_Ehdr and Elf32_Phdr and returns error if
> size provided by caller is less than this.
> 
> 
> 	if (offset + filesz > size) {
> 		dev_dbg(dev, "truncated fw: need 0x%x avail 0x%zx\n",
> 			offset + filesz, size);
> 		ret = -EINVAL;
> 		break;
> 	}
> 
>>> + *
>>> + * Boot a remote processor (i.e. load its firmware, power it on, ...).
>>> + *
>>> + * This function first loads the firmware set in the uclass pdata of Remote
>>> + * processor to a buffer and then loads firmware to the remote processor
>>> + * using rproc_load().
>>> + *
>>> + * Return: 0 on success, and an appropriate error value otherwise
>>> + */
>>> +int rproc_boot(struct udevice *rproc_dev, size_t fw_size);
>>
>> Was wondering if you need separate API for rproc_set_firmware or we can just
>> pass firmware name as argument to rproc_boot()?
>>
> 
> Technically we can. But when we discussed this approach first in v1, you
> had asked to keep the APIs similar to upstream linux. Upstream linux has
> these two APIs so I kept it that way. If you want I can drop the first
> API. Please let me know.

Sure you can keep it as it is in Linux, but there, rproc_boot doesn't
take fw_size argument. So wondering why you should have it in u-boot.

> 
>>>  #else
>>>  static inline int rproc_init(void) { return -ENOSYS; }
>>>  static inline int rproc_dev_init(int id) { return -ENOSYS; }
>>> @@ -744,6 +775,10 @@ static inline int rproc_elf_load_rsc_table(struct udevice *dev, ulong fw_addr,
>>>  					   ulong fw_size, ulong *rsc_addr,
>>>  					   ulong *rsc_size)
>>>  { return -ENOSYS; }
>>> +static inline int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name)
>>> +{ return -ENOSYS; }
>>> +static inline int rproc_boot(struct udevice *rproc_dev, size_t fw_size)
>>> +{ return -ENOSYS; }
>>>  #endif
>>>  
>>>  #endif	/* _RPROC_H_ */
>>
> 
> [1]
> https://elixir.bootlin.com/u-boot/latest/source/drivers/remoteproc/pru_rproc.c#L324
> 

-- 
cheers,
-roger


More information about the U-Boot mailing list