[PATCH 1/2] rockchip: rk3328: Update stack addresses
Jonas Karlman
jonas at kwiboo.se
Mon Feb 12 01:59:06 CET 2024
With the stack and text base used by U-Boot SPL and proper on RK3328
there is a high likelihood of overlapping when U-Boot proper + FDT nears
1 MiB in size.
Currently the following memory layout is used:
- 0x00000000 (@0 MiB): U-Boot SPL text base
- 0x00040000 (@256 KiB): TF-A
- 0x00200000 (@2 MiB): U-Boot proper text base
- 0x00300000 (@3 MiB): U-Boot proper init stack
- 0x00400000 (@4 MiB): U-Boot SPL init stack
- 0x00600000 (@6 MiB): U-Boot SPL reloc stack
- 0x02000000 (@32 MiB): U-Boot SPL bss
- 0x08400000 (@132 MiB): optional OPTEE
SPL load TF-A, U-Boot proper and optional OPTEE after SPL stack has
relocated, meaning that there is room for close to 4 MiB (@2-6 MiB).
However, the initial stack used by U-Boot proper is limiting the size
of U-Boot proper + FDT to below 1 MiB (@2-3 MiB).
Instead change to use the following memory layout:
- 0x00000000 (@0 MiB): U-Boot SPL text base
- 0x00040000 (@256 KiB): TF-A
- 0x00200000 (@2 MiB): U-Boot proper text base
- 0x00400000 (@4 MiB): U-Boot SPL init stack
- 0x00800000 (@8 MiB): U-Boot proper init stack (changed)
- 0x02000000 (@32 MiB): U-Boot SPL bss
- 0x04000000 (@64 MiB): U-Boot SPL reloc stack (changed)
- 0x08400000 (@132 MiB): optional OPTEE
This should leave room for loading and running a U-Boot proper close
to 6 MiB (@2-8 MiB) in size. When U-Boot proper has relocated is should
be possible to use @2-132 MiB and @164 MiB+ for scripts, kernel etc.
Also update SYS_MALLOC_F_LEN to use a 16 KiB malloc area running in SPL
pre-reloc and proper pre-reloc stage. Same size that is used on RK3399.
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
arch/arm/mach-rockchip/rk3328/Kconfig | 2 +-
configs/evb-rk3328_defconfig | 4 +---
configs/nanopi-r2c-plus-rk3328_defconfig | 4 ++--
configs/nanopi-r2c-rk3328_defconfig | 4 ++--
configs/nanopi-r2s-rk3328_defconfig | 4 ++--
configs/orangepi-r1-plus-lts-rk3328_defconfig | 4 ++--
configs/orangepi-r1-plus-rk3328_defconfig | 4 ++--
configs/roc-cc-rk3328_defconfig | 4 ++--
configs/rock-pi-e-rk3328_defconfig | 4 +---
configs/rock64-rk3328_defconfig | 4 ++--
10 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig
index d5cb649ae6ba..681a1a624da2 100644
--- a/arch/arm/mach-rockchip/rk3328/Kconfig
+++ b/arch/arm/mach-rockchip/rk3328/Kconfig
@@ -22,7 +22,7 @@ config SYS_SOC
default "rk3328"
config SYS_MALLOC_F_LEN
- default 0x2000
+ default 0x4000
config SPL_LIBCOMMON_SUPPORT
default y
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index 004cbd33e80a..975ba72a8274 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -5,7 +5,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
@@ -16,7 +16,6 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
@@ -38,7 +37,6 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
index 2f0d253b4b7c..7dfa8686651d 100644
--- a/configs/nanopi-r2c-plus-rk3328_defconfig
+++ b/configs/nanopi-r2c-plus-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c-plus"
@@ -15,7 +15,7 @@ CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
index ca13eb873a72..ba98c152639c 100644
--- a/configs/nanopi-r2c-rk3328_defconfig
+++ b/configs/nanopi-r2c-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c"
@@ -15,7 +15,7 @@ CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 619707436130..4a8f952d7765 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
@@ -15,7 +15,7 @@ CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig
index 8e9a9411a763..537383458981 100644
--- a/configs/orangepi-r1-plus-lts-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus-lts"
@@ -16,7 +16,7 @@ CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig
index 240fcdeb221f..a0c541e933da 100644
--- a/configs/orangepi-r1-plus-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus"
@@ -16,7 +16,7 @@ CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index f734116f847e..8b122975ea8a 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
@@ -15,7 +15,7 @@ CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 5ccdc02d4c86..67a5f52f0073 100644
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e"
@@ -18,7 +18,6 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
@@ -40,7 +39,6 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_ATF=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 81284c6697a5..32acd3b29310 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
@@ -16,7 +16,7 @@ CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x4000000
CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
--
2.43.0
More information about the U-Boot
mailing list