[PATCH 7/7] verdin-imx8mp_defconfig: Enable PCIe/NVMe support

[Marcel Ziswiler]

On Wed, 2024-02-21 at 15:31 +0100, Francesco Dolcini wrote:
> On Wed, Feb 21, 2024 at 09:18:51AM +0000, Marcel Ziswiler wrote:
> > On Wed, 2024-02-21 at 08:55 +0100, Francesco Dolcini wrote:
> > > On Tue, Feb 20, 2024 at 06:40:56PM +0530, Sumit Garg wrote:
> > > > Also, enable reset driver which is a prerequisite for PCIe support.
> > > > 
> > > > Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
> > > > ---
> > > >  configs/verdin-imx8mp_defconfig | 9 +++++++++
> > > >  1 file changed, 9 insertions(+)
> > > > 
> > > > diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
> > > > index 22b8a334dfa..d8bd644322b 100644
> > > > --- a/configs/verdin-imx8mp_defconfig
> > > > +++ b/configs/verdin-imx8mp_defconfig
> > > > @@ -185,3 +185,12 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
> > > >  CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
> > > >  CONFIG_IMX_WATCHDOG=y
> > > >  CONFIG_HEXDUMP=y
> > > > +CONFIG_DM_RESET=y
> > > > +CONFIG_RESET_IMX=y
> > > > +CONFIG_PCI=y
> > > > +CONFIG_PCIE_DW_IMX8=y
> > > > +CONFIG_PHY_IMX8M_PCIE=y
> > > > +CONFIG_CMD_PCI=y
> > > > +CONFIG_NVME=y
> > > > +CONFIG_NVME_PCI=y
> > > > +CONFIG_CMD_NVME=y
> > > 
> > > This will increase the u-boot proper size
> > 
> > Yes, I checked and it is actually slightly more than 32 K.
> > 
> > > and marginally increase the
> > > boot time (because of a bigger binary to be read from the eMMC).
> > 
> > That was also my concern.
> > 
> > > Apart of that do you expect any other impact on those changes? SPL
> > > binary size should not be affected, correct?
> > > 
> > > Asking this out loudly to confirm that nothing unexpected is going to
> > > happen because of these changes.
> > 
> > Other than that I actually gave it a quick try and PCIe/NVMe does indeed work and the regular boot is not
> > affected (other than the slight size and boot time increase, of course).
> > 
> > > For my curiosity, care to share what's the use case? Do you plan to have
> > > the OS stored into an NVME device?
> > 
> > For us the question is basically whether that use case does mandate
> > enforcing such changes for each and every customer. Plus the regular
> > expected maintenance effort any such change brings with it, of course.
> 
> Marcel, given all you wrote here I would personally be fine
> on having this enabled in the verdin_imx8mp defconfig.
> 
> What's your idea? Are you good with it?

Yes, I do agree.

> Francesco

Cheers

Marcel