[PATCH 4/5] arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1

[Michal Simek]

usb0 is already updated but forget to also update usb1.

Fixes: 4ff083f09bc2 ("arm64: zynqmp: Do not expose usbhub nodes")
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 3 ++-
 arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index afcf8a8ee6ba..ce7c5eb6d346 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -174,12 +174,13 @@
 	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-
+#if 0
 	usbhub1: usb-hub { /* u84 */
 		i2c-bus = <&usbhub_i2c1>;
 		compatible = "microchip,usb5744";
 		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
 	};
+#endif
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index 24be5dd84e19..6c29f6574134 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -175,11 +175,13 @@
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
 
+#if 0
 	usbhub1: usb-hub { /* u84 */
 		i2c-bus = <&usbhub_i2c1>;
 		compatible = "microchip,usb5744";
 		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
 	};
+#endif
 };
 
 &dwc3_1 {
-- 
2.36.1