[PATCH v2 10/13] arm: dts: introduce am62p5 uboot dts files
Andrew Davis
afd at ti.com
Fri Feb 2 17:36:01 CET 2024
On 2/2/24 10:28 AM, Bryan Brattlof wrote:
> Hi Andrew!
>
> On February 2, 2024 thus sayeth Andrew Davis:
>> On 1/31/24 9:06 PM, Bryan Brattlof wrote:
>>> Include the uboot device tree files needed to boot the board.
>>>
>>> Signed-off-by: Bryan Brattlof <bb at ti.com>
>>> ---
>>> arch/arm/dts/Makefile | 2 +
>>> arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi | 2800 ++++++++++++++++++++
>>> arch/arm/dts/k3-am62p-sk-binman.dtsi | 173 ++
>>> arch/arm/dts/k3-am62p5-r5-sk.dts | 101 +
>>> arch/arm/dts/k3-am62p5-sk-u-boot.dtsi | 49 +
>>> arch/arm/mach-k3/Makefile | 1 +
>>> arch/arm/mach-k3/am62p5_init.c | 4 +-
>>> dts/arch/arm64/ti | 1 +
>>> 8 files changed, 3129 insertions(+), 2 deletions(-)
>>> create mode 100644 arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi
>>> create mode 100644 arch/arm/dts/k3-am62p-sk-binman.dtsi
>>> create mode 100644 arch/arm/dts/k3-am62p5-r5-sk.dts
>>> create mode 100644 arch/arm/dts/k3-am62p5-sk-u-boot.dtsi
>>> create mode 120000 dts/arch/arm64/ti
>>>
>
> ...
>
>>> diff --git a/arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi
>>> b/arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi
>>> new file mode 100644
>>> index 0000000000000..f66435201530f
>>> --- /dev/null
>>> +++ b/arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi
>>> @@ -0,0 +1,2800 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * This file was generated with the
>>> + * AM62Px SysConfig DDR Subsystem Register Configuration Tool v0.10.02
>>> + * Thu Jan 25 2024 10:43:46 GMT-0600 (Central Standard Time)
>>> + * DDR Type: LPDDR4
>>> + * F0 = 50MHz F1 = NA F2 = 1600MHz
>>> + * Density (per channel): 16Gb
>>> + * Number of Ranks: 2
>>> + */
>>> +
>>> +#define DDRSS_PLL_FHS_CNT 5
>>> +#define DDRSS_PLL_FREQUENCY_1 800000000
>>> +#define DDRSS_PLL_FREQUENCY_2 800000000
>>> +#define DDRSS_SDRAM_IDX 17
>>> +#define DDRSS_REGION_IDX 17
>>> +
>>> +#define DDRSS_CTL_0_DATA 0x00000B00
>>> +#define DDRSS_CTL_1_DATA 0x00000000
>>> +#define DDRSS_CTL_2_DATA 0x00000000
>>> +#define DDRSS_CTL_3_DATA 0x00000000
>>> +#define DDRSS_CTL_4_DATA 0x00000000
>>> +#define DDRSS_CTL_5_DATA 0x00000000
>>
>> I wonder if it would be better to generate this file
>> during build..
>>
>
> Yeah we can save a lot of space by removing tons of these registers
> writing 0x0 to the reserved ranges... The section for the different PHYs
> is particularly aggravating.
>
Might be a silly question, what happens if you don't write these 0x0
at all, is there a sane default of 0x0, or is it random on powerup?
> I told Simon and Marex last year I'd get to it once I find some free
> cycles and then I went and had a son ;) but it's still in the backlog
>
Know the feeling :)
Andrew
>>
>>> +&main_bcdma {
>>> + reg = <0x00 0x485c0100 0x00 0x100>,
>>> + <0x00 0x4c000000 0x00 0x20000>,
>>> + <0x00 0x4a820000 0x00 0x20000>,
>>> + <0x00 0x4aa40000 0x00 0x20000>,
>>> + <0x00 0x4bc00000 0x00 0x100000>,
>>> + <0x00 0x48600000 0x00 0x8000>,
>>> + <0x00 0x484a4000 0x00 0x2000>,
>>> + <0x00 0x484c2000 0x00 0x2000>;
>>> + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt",
>>> + "ringrt", "cfg", "tchan", "rchan";
>>> +};
>>> +
>>
>> Do we still need these? Thought they got fixed kernel side already.
>
> Ah you're right I missed that i'll remove this in v2
>
>>
>>> +&main_pktdma {
>>> + reg = <0x00 0x485c0000 0x00 0x100>,
>>> + <0x00 0x4a800000 0x00 0x20000>,
>>> + <0x00 0x4aa00000 0x00 0x40000>,
>>> + <0x00 0x4b800000 0x00 0x400000>,
>>> + <0x00 0x485e0000 0x00 0x20000>,
>>> + <0x00 0x484a0000 0x00 0x4000>,
>>> + <0x00 0x484c0000 0x00 0x2000>,
>>> + <0x00 0x48430000 0x00 0x4000>;
>>> + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
>>> + "cfg", "tchan", "rchan", "rflow";
>>> +};
>>> diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
>>> index 42161376469e2..820b313a83c23 100644
>>> --- a/arch/arm/mach-k3/Makefile
>>> +++ b/arch/arm/mach-k3/Makefile
>>> @@ -20,5 +20,6 @@ obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o
>>> obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
>>> obj-$(CONFIG_SOC_K3_AM625) += am625_init.o
>>> obj-$(CONFIG_SOC_K3_AM62A7) += am62a7_init.o
>>> +obj-$(CONFIG_SOC_K3_AM62P5) += am62p5_init.o
>>> endif
>>> obj-y += common.o security.o
>>> diff --git a/arch/arm/mach-k3/am62p5_init.c b/arch/arm/mach-k3/am62p5_init.c
>>> index 5b6795cc7d246..9ff877d5d26e8 100644
>>> --- a/arch/arm/mach-k3/am62p5_init.c
>>> +++ b/arch/arm/mach-k3/am62p5_init.c
>>> @@ -110,7 +110,7 @@ void board_init_f(ulong dummy)
>>> * through a SYSFW PM-init step and will need a re-init in some way
>>> * due to changing module clock frequencies.
>>> */
>>> - if (IS_ENABLED(CONFIG_K3_EARLY_CONS))
>>> + if (IS_ENABLED(CONFIG_K3_EARLY_CONS)) {
>>
>> Looks like fixes for a previous patch that didn't get squashed.
>>
>
> haha Oops good catch.. I'll fixup this properly
>
>
> Thanks for the review Andrew
> ~Bryan
More information about the U-Boot
mailing list