[PATCH 14/15] rockchip: rk3328-rock64: Enable boot from SPI NOR flash
Jonas Karlman
jonas at kwiboo.se
Wed Feb 7 01:02:43 CET 2024
Add Kconfig options to enable support for booting from SPI NOR flash on
Pine64 Rock64.
The generated bootable u-boot-rockchip-spi.bin that can be written to
0x0 of SPI NOR flash. The FIT image is loaded from 0x60000, same as on
RK35xx boards.
=> sf probe
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
=> load mmc 1:1 10000000 u-boot-rockchip-spi.bin
1359872 bytes read in 65 ms (20 MiB/s)
=> sf update $fileaddr 0 $filesize
device 0 offset 0x0, size 0x14c000
1118208 bytes written, 241664 bytes skipped in 8.516s, speed 163516 B/s
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
configs/rock64-rk3328_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 0157a1efe374..01e447448513 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -13,6 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_RK3328=y
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x600000
@@ -20,6 +21,8 @@ CONFIG_SPL_STACK=0x400000
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
@@ -42,6 +45,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
@@ -76,7 +81,10 @@ CONFIG_MISC=y
CONFIG_ROCKCHIP_EFUSE=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH_PHY=y
CONFIG_ETH_DESIGNWARE=y
--
2.43.0
More information about the U-Boot
mailing list