[PATCH v2 1/2] imx: imxrt1050-evk: Add support for SPI flash booting

[Fabio Estevam]

Hi Jesse,

On Tue, Feb 6, 2024 at 1:40 PM Jesse Taube <mr.bossman075 at gmail.com> wrote:
>
> Add support for booting the imxrt1050-evk from spi.
> Add imximage config and the ability for SPL to boot from NOR.
>
> Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>

This causes the following build failure when building imxrt1020-evk_defconfig:

arm: + imxrt1020-evk
1221+binman: Device tree 'u-boot.dtb' does not have a 'binman' node
1222+make[1]: *** [Makefile:1125: .binman_stamp] Error 1
1223+make: *** [Makefile:177: sub-make] Error 2
1224w+arch/arm/dts/imxrt1170-evk.dtb: Warning (reg_format):
/memory/ocram at 20240000:reg: property has invalid length (8 bytes)
(#address-cells == 2, #size-cells == 1)
1225w+arch/arm/dts/imxrt1170-evk.dtb: Warning (reg_format):
/memory/sdram at 80000000:reg: property has invalid length (8 bytes)
(#address-cells == 2, #size-cells == 1)
1226w+arch/arm/dts/imxrt1170-evk.dtb: Warning
(avoid_default_addr_size): /memory/ocram at 20240000: Relying on default
#address-cells value
1227w+arch/arm/dts/imxrt1170-evk.dtb: Warning
(avoid_default_addr_size): /memory/ocram at 20240000: Relying on default
#size-cells value
1228w+arch/arm/dts/imxrt1170-evk.dtb: Warning
(avoid_default_addr_size): /memory/sdram at 80000000: Relying on default
#address-cells value
1229w+arch/arm/dts/imxrt1170-evk.dtb: Warning
(avoid_default_addr_size): /memory/sdram at 80000000: Relying on default
#size-cells value
1230 arm: w+ topic_miamiplus

Please fix and resend.

Also, there was a whitespace warning when applying this series.

Please make sure to run checkpatch on the patches.