[PATCH v10 00/15] Introduce initial TI's J784S4 and AM69 support
Marcel Ziswiler
marcel.ziswiler at toradex.com
Wed Feb 28 15:55:35 CET 2024
Hi Apurva
On Wed, 2024-02-28 at 16:59 +0530, Apurva Nandan wrote:
> Hi Marcel,
>
> On 27/02/24 21:45, Marcel Ziswiler wrote:
> > Hi Apurva
> >
> > On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> > > Hello Everyone!
> > >
> > > This series will introduce basic support (SD and UART) support for Texas
> > > Instruments J784S4 EVM.
> > >
> > > The J784S4 SoC device tree patches are taken from kernel patch submissions
> > > and will be updated as they are accepted and merged to the kernel tree.
>
>
> Sorry about that. I didn't update that part of the cover letter. So now,
> we will be using
> Linux dts as a git subtree inside U-Boot. And hence, this series doesn't
> has a Linux DTS sync/copy patch.
>
> You can get all details in this series:
> https://lore.kernel.org/all/20240222093607.3085545-1-sumit.garg@linaro.org/#r
Yes, sorry. I got that now and with that it applies/compiles perfectly.
> > This patch set does not include any such, right?
> >
> > Anyway, for my tests I took them from linux-next on kernel.org.
> >
> > However, I could not get the SD card working apart from it booting U-Boot off of it:
> >
> > U-Boot SPL 2024.04-rc3-00015-g7186697f1ff (Feb 27 2024 - 14:27:29 +0100)
> > SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.9--v09.01.09 (Kool Koala)')
> > Initialized 4 DRAM controllers
> > SPL initial stack usage: 13416 bytes
> > Trying to boot from MMC2
> > Authentication passed
> > Authentication passed
> > Authentication passed
> > Loading Environment from nowhere... OK
> > Authentication passed
> > Authentication passed
> > Starting ATF on ARM64 core...
> >
> > NOTICE: BL31: v2.10.0(release):v2.10.0-412-g885e93f90
> > NOTICE: BL31: Built : 09:48:15, Feb 27 2024
> > I/TC:
> > I/TC: OP-TEE version: 4.1.0-140-g4078bcde9 (gcc version 13.2.1 20231009 (Arm GNU
> > Toolchain 13.2.rel1 (Build arm-13.7))) #1 Tue Feb 27 08:54:24 UTC 2024 aarch64
> > I/TC: WARNING: This OP-TEE configuration might be insecure!
> > I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/
> > porting_guidelines.html
> > I/TC: Primary CPU initializing
> > I/TC: GIC redistributor base address not provided
> > I/TC: Assuming default GIC group status and modifier
> > I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.9--v09.01.09 (Kool Koala)')
> > I/TC: HUK Initialized
> > I/TC: Activated SA2UL device
> > I/TC: Enabled firewalls for SA2UL TRNG device
> > I/TC: SA2UL TRNG initialized
> > I/TC: SA2UL Drivers initialized
> > I/TC: Primary CPU switching to normal world boot
> >
> > U-Boot SPL 2024.04-rc3-00015-g7186697f1ff-dirty (Feb 27 2024 - 16:40:07 +0100)
> > SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.9--v09.01.09 (Kool Koala)')
> > Trying to boot from MMC2
> > Authentication passed
> > Authentication passed
> >
> >
> > U-Boot 2024.04-rc3-00015-g7186697f1ff-dirty (Feb 27 2024 - 16:40:07 +0100)
> >
> > SoC: J784S4 SR1.0 HS-FS
> > Model: Texas Instruments J784S4 EVM
> > DRAM: 2 GiB (effective 32 GiB)
> > Core: 87 devices, 30 uclasses, devicetree: separate
> > Flash: 0 Bytes
> > MMC: mmc at 4f80000: 0, mmc at 4fb0000: 1
> > Loading Environment from nowhere... OK
> > In: serial at 2880000
> > Out: serial at 2880000
> > Err: serial at 2880000
> > am65_cpsw_nuss ethernet at 46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904
> > Ports:1 mdio_freq:1000000
> > Net: eth0: ethernet at 46000000port@1
> > Hit any key to stop autoboot: 0
> > => mmc dev 0
> > switch to partitions #0, OK
> > mmc0(part 0) is current device
> > => mmc info
> > Device: mmc at 4f80000
> > Manufacturer ID: 13
> > OEM: 4e
> > Name: G1M15L
> > Bus Speed: 200000000
> > Mode: HS400 (200MHz)
> > Rd Block Len: 512
> > MMC version 5.1
> > High Capacity: Yes
> > Capacity: 29.6 GiB
> > Bus Width: 8-bit DDR
> > Erase Group Size: 512 KiB
> > HC WP Group Size: 8 MiB
> > User Capacity: 29.6 GiB WRREL
> > Boot Capacity: 31.5 MiB ENH
> > RPMB Capacity: 4 MiB ENH
> > Boot area 0 is not write protected
> > Boot area 1 is not write protected
> > => mmc dev 1
> > i2c_write: error waiting for data ACK (status=0x116)
> > pca953x gpio at 22: Error reading output register
> > Card did not respond to voltage select! : -110
> > mmc_init: -95, time 114
> > =>
> >
> > Not sure what the issue may be.
>
>
> Which platform are you testing this on? J784S4 EVM or AM69-SK?
AM69-SK.
> As per comments on v8, I have moved from config fragments to having
> #include in defconfig files.
> So, to build for AM69-SK, you need to use am69_sk_r5_defconfig and
> am69_sk_a72_defconfig .
> And for the J784S4 EVM, the defconfigs will stay same:
> j784s4_evm_r5_defconfig and j784s4_evm_a72_defconfig .
Okay, that's what I was missing. Thanks!
Apart from a few warnings this works now perfectly.
Configuring for am69_sk_r5_defconfig I get the following:
generated_defconfig:161:warning: override: reassigning to symbol ARM
generated_defconfig:161:warning: override: ARM changes choice state
generated_defconfig:162:warning: override: reassigning to symbol ARCH_K3
generated_defconfig:162:warning: override: ARCH_K3 changes choice state
generated_defconfig:163:warning: override: reassigning to symbol SOC_K3_J784S4
generated_defconfig:163:warning: override: SOC_K3_J784S4 changes choice state
generated_defconfig:164:warning: override: reassigning to symbol TARGET_J784S4_R5_EVM
generated_defconfig:164:warning: override: TARGET_J784S4_R5_EVM changes choice state
generated_defconfig:166:warning: override: reassigning to symbol DEFAULT_DEVICE_TREE
generated_defconfig:167:warning: override: reassigning to symbol SPL_OF_LIST
And configuring for am69_sk_a72_defconfig:
generated_defconfig:167:warning: override: reassigning to symbol ARM
generated_defconfig:167:warning: override: ARM changes choice state
generated_defconfig:168:warning: override: reassigning to symbol ARCH_K3
generated_defconfig:168:warning: override: ARCH_K3 changes choice state
generated_defconfig:169:warning: override: reassigning to symbol SOC_K3_J784S4
generated_defconfig:169:warning: override: SOC_K3_J784S4 changes choice state
generated_defconfig:170:warning: override: reassigning to symbol TARGET_J784S4_A72_EVM
generated_defconfig:170:warning: override: TARGET_J784S4_A72_EVM changes choice state
generated_defconfig:172:warning: override: reassigning to symbol DEFAULT_DEVICE_TREE
generated_defconfig:173:warning: override: reassigning to symbol OF_LIST
For the whole series:
Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com> # AM69-SK
> > > All other patches are specific to SPL and u-boot and do not have
> > > dependency on other trees. Appreciate a review for acceptance to u-boot
> > > tree.
> > >
> > > Here are some of the salient features of the J784S4 automotive grade
> > > application processor:
> > >
> > > The J784S4 SoC belongs to the K3 Multicore SoC architecture
> > > platform, providing advanced system integration in automotive,
> > > ADAS and industrial applications requiring AI at the network edge.
> > > This SoC extends the K3 Jacinto 7 family of SoCs with focus on
> > > raising performance and integration while providing interfaces,
> > > memory architecture and compute performance for multi-sensor, high
> > > concurrency applications.
> > >
> > > Some highlights of this SoC are:
> > > * Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
> > > 4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
> > > deep learning and CNN.
> > > * 3D GPU: Automotive grade IMG BXS-4-64 MC1
> > > * Vision Processing Accelerator (VPAC) with image signal processor and Depth
> > > and Motion Processing Accelerator (DMPAC)
> > > * Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
> > > DPI interface.
> > > * Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
> > > support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
> > > device subsystems, Up to 20 MCANs, among other peripherals.
> > >
> > > See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
> > > for further details: http://www.ti.com/lit/zip/spruj52
> > >
> > > In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It
> > > supports the following interfaces:
> > > * 32 GB DDR4 RAM
> > > * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
> > > * x1 Input Audio Jack, x1 Output Audio Jack
> > > * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
> > > * x2 4L PCIe connector
> > > * x1 UHS-1 capable micro-SD card slot
> > > * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
> > > UFS flash.
> > > * x6 UART through UART-USB bridge
> > > * XDS110 for onboard JTAG debug using USB
> > > * Temperature sensors, user push buttons and LEDs
> > > * 40-pin User Expansion Connector
> > > * x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
> > > * x1 15-pin CSI header
> > > * x6 MCAN instances
> > >
> > > Schematics: https://www.ti.com/lit/zip/sprr458
> > >
> > > AM69 SD mode bootlog:
> > > https://gist.githubusercontent.com/apurvanandan1997/1b2c55d0204ff0f5a47ebbc196a97e99/raw/
> > > J784S4 SD mode bootlog:
> > > https://gist.githubusercontent.com/apurvanandan1997/5e2ef85ee4322798d22b57a60dc917db/raw/
> > > eMMC UDA moode bootlog:
> > > https://gist.githubusercontent.com/apurvanandan1997/3cffada252d50a8aa0c00a91f1f2f856/raw/
> > >
> > > Note: This series is dependent on the following series for OF_UPSTREAM support
> > > https://lore.kernel.org/all/20240222093607.3085545-1-sumit.garg@linaro.org/
> > >
> > > And, '[PATCH 01/15] Makefile: remove hardcoded device tree source directory' has been
> > > cherry-picked from PATCH 11 of https://lore.kernel.org/all/20240201030634.1120963-16-bb@ti.com/ by Bryan
> > > Brattlof
> > >
> > > Changes in v10:
> > > 1) Fixed build failure due to missing OF_UPSTREAM in a72 defconfigs
> > > 2) Updated paths of board dtbs in binman.dtsi, CONFIG_OF_LIST and CONFIG_DEFAULT_DEVICE_TREE
> > >
> > > Changes in v9:
> > > 1) Added support for OF_UPSTREAM and removed Linux dts copy/sync patches
> > > 2) Fixed DRAM enumeration algorithm in j784s4_init.c by adding max no. of controllers
> > > 3) Squashed bootph-all property of memory node into appropriate patch
> > > 4) Moved DDR changes out of the DMA patch
> > > 5) Fixed commit messages, MAINTAINERS file, and removed unnecessary C headers
> > > 6) Added comment for WKUP_UART0
> > > 7) Used #include for defconfig for AM69-SK platform instead of config fragments
> > > 8) Fixed J784S4 EVM boot switch nameing in doc
> > >
> > > Link to v8:
> > > https://lore.kernel.org/u-boot/20240119175043.3904751-1-a-nandan@ti.com/
> > >
> > > Changes in v8:
> > > 1) Squashed Linux am69-sk and j784s4-evm dts patches into one
> > > 2) Sorted config addition of SoC in arm/mach-K3/Kconfig
> > > 3) Updated commit messages according to the reviews
> > > 4) Removed #inlcude <config.h>
> > > 5) Removed k3_mmc_stop_clock and k3_mmc_restart_clock
> > > 6) Moved board_init_f logic to separate smaller functions
> > > 7) Removed J784S4 EVM specific Kconfig options in j784s4_int.c
> > > 8) Cleaned up emmc boot flow based on commit 66459346463439c72f84cfd1f985496b8a6142d8
> > > 9) Removed the dependency of findfdt and updated to ti_set_fdt_env
> > > 10) Updated copyright messages
> > > 11) Did cleanup/formatting of yaml files, removing linting errors
> > > 12) Removed k3-am69-sk specific things from k3-j784s4-binman.dtsi
> > > 13) Changed OF_LIST to a single dtb
> > > 14) Added bootph-all tag in EVM and SK dts instead of u-boot.dtsi
> > > 15) Trimmed the defconfig files to minimal
> > > 16) Merged the MAINTAINER file in right patches
> > > 17) Updated OpenOCD tag in U-Boot doc
> > > 18) And fixed other formatting mistakes.
> > >
> > > Link to v7:
> > > https://lore.kernel.org/u-boot/20231219191537.4039361-1-a-nandan@ti.com/
> > >
> > > Changes in v7:
> > > 1) Moved to unified memory map in arm64-mmu.c based on
> > > https://lore.kernel.org/all/20231128170528.407707-1-afd@ti.com/
> > > 2) Used ARRAY_SIZE in clk-data.c and dev-data.c
> > > 3) Removed I2C board detect from j784s4_init.c
> > > 4) Rebased to latest next
> > >
> > > Link to v6:
> > > https://lore.kernel.org/all/20231206123753.1486031-1-a-nandan@ti.com/
> > >
> > > Changes in v6:
> > > 1) Move bootph-all of memory node to u-boot.dtsi
> > > 2) Used a while loop for DRAM controller init, instead of hard-coding for 4 DRAM
> > > 3) Fixed build error by adding board/ti/j784s4/Kconfig
> > > 4) Trimmed out j784s4_evm.h
> > > 5) Fixed checkpatch warnings
> > >
> > > Link to v5:
> > > https://patchwork.ozlabs.org/project/uboot/cover/20231130115552.3580995-1-a-nandan@ti.com/
> > >
> > > Changes in v5:
> > > 1) Incorporated Andrew Davis' "Move R5 specific code into new r5/ directory" and
> > > "Move board selection to mach-k3" series changes.
> > > 2) Incorporated Neha Francis' "Move to using templated FITs" series changes.
> > > 3) Synced device tree files with Linux v6.7-rc1
> > > 4) Changed ti_mmc to mmc1 target from bootstd
> > > 5) Updated doc based on review comments
> > > 6) Removed remoteproc support from the series
> > > 7) Splitted board files patch into smaller patches
> > > 8) Trimmed j784s4.env to necessary variables
> > > 9) Used fdtdec_setup_mem_size_base fdtdec_setup_memory_banksize in evm.c
> > > 10) Trimmed down evm.c to essential header files.
> > > 11) Switched to multi-dtb fit compilation with config fragments
> > >
> > > Link to v4:
> > > https://lore.kernel.org/u-boot/20231001165545.494212-1-a-nandan@ti.com/
> > >
> > > Changes in v4:
> > > 1) Cleaned up Copyright and SPDX identifiers
> > > 2) Synced the device trees to Linux v6.6-rc1 tag
> > > 3) Added cleanup patch for sorting SoC JTAG ID entries
> > > 4) Removed EEPROM board detect from evm.c and added am69 config fragments
> > > 5) Updated MAINTAINERS files and commit messages
> > > 6) Removed struct renaming in ti_k3_r5f_rproc driver
> > >
> > > Link to v3:
> > > https://lore.kernel.org/u-boot/20230908110551.861575-1-a-nandan@ti.com/
> > >
> > > Changes in v3:
> > > 1) Added AM69 SK support in the series
> > > 2) Switched from distroboot to bootstd support
> > > 3) Added remoteproc support for J784S4
> > > 4) Added documentation for both SoCs
> > > 5) Added binman support
> > > 6) Removed unnecessarry nodes from r5-evm.dts and evm-u-boot.dtsi
> > > 7) Added HS device support
> > > 8) Added env file for environement variables
> > > 9) Removed ti-serdes-mux bindings
> > > 10) Cleaned up all files and synced with latest
> > > 11) Addressed all previous review comments
> > >
> > > Note: The base dts files have been sync from next-20230905 linux tag as per review comment received
> > > on previous re-roll:
> > > https://lore.kernel.org/u-boot/20230321155227.GV8135@bill-the-cat/
> > >
> > > Link to v2:
> > > https://lore.kernel.org/u-boot/20230321141028.24456-1-hnagalla@ti.com/
> > >
> > > Apurva Nandan (12):
> > > arm: mach-k3: Kconfig: Sort SOC_K3 config entries
> > > arm: mach-k3: Add basic support for J784S4 SoC definition
> > > arm: mach-k3: Sort SoC JTAG_ID entries
> > > soc: ti: k3-socinfo: Add entry for J784S4 SoC
> > > arm: mach-k3: j784s4: Add clk and power support
> > > drivers: dma: Add support for J784S4 SoC
> > > board: ti: j784s4: Add board support for J784S4 EVM
> > > board: ti: j748s4: Add board config yaml files
> > > board: ti: j784s4: Add boot environment variables
> > > arm: dts: Introduce j784s4 u-boot dts files
> > > configs: j784s4_evm: Add defconfig for J784S4 EVM board
> > > doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation
> > >
> > > Bryan Brattlof (1):
> > > Makefile: remove hardcoded device tree source directory
> > >
> > > Dasnavis Sabiya (2):
> > > arm: dts: Introduce am69-sk u-boot dts files
> > > configs: am69_sk: Add defconfig for AM69 SK board
> > >
> > > Makefile | 18 +-
> > > arch/arm/dts/Makefile | 4 +
> > > arch/arm/dts/k3-am69-r5-sk.dts | 106 +
> > > arch/arm/dts/k3-am69-sk-u-boot.dtsi | 54 +
> > > arch/arm/dts/k3-j784s4-binman.dtsi | 345 +
> > > arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi | 8757 ++++++++++++++++
> > > arch/arm/dts/k3-j784s4-ddr.dtsi | 8858 +++++++++++++++++
> > > arch/arm/dts/k3-j784s4-evm-u-boot.dtsi | 31 +
> > > arch/arm/dts/k3-j784s4-r5-evm.dts | 106 +
> > > arch/arm/mach-k3/Kconfig | 33 +-
> > > arch/arm/mach-k3/Makefile | 2 +
> > > arch/arm/mach-k3/include/mach/hardware.h | 13 +-
> > > .../mach-k3/include/mach/j784s4_hardware.h | 59 +
> > > arch/arm/mach-k3/include/mach/j784s4_spl.h | 47 +
> > > arch/arm/mach-k3/include/mach/spl.h | 4 +
> > > arch/arm/mach-k3/j784s4/Kconfig | 34 +
> > > arch/arm/mach-k3/j784s4_fdt.c | 15 +
> > > arch/arm/mach-k3/j784s4_init.c | 310 +
> > > arch/arm/mach-k3/r5/Makefile | 1 +
> > > arch/arm/mach-k3/r5/j784s4/Makefile | 7 +
> > > arch/arm/mach-k3/r5/j784s4/clk-data.c | 428 +
> > > arch/arm/mach-k3/r5/j784s4/dev-data.c | 98 +
> > > board/ti/j784s4/Kconfig | 37 +
> > > board/ti/j784s4/MAINTAINERS | 21 +
> > > board/ti/j784s4/Makefile | 7 +
> > > board/ti/j784s4/board-cfg.yaml | 37 +
> > > board/ti/j784s4/evm.c | 41 +
> > > board/ti/j784s4/j784s4.env | 17 +
> > > board/ti/j784s4/pm-cfg.yaml | 13 +
> > > board/ti/j784s4/rm-cfg.yaml | 3058 ++++++
> > > board/ti/j784s4/sec-cfg.yaml | 380 +
> > > board/ti/j784s4/tifs-rm-cfg.yaml | 2656 +++++
> > > configs/am69_sk_a72_defconfig | 9 +
> > > configs/am69_sk_r5_defconfig | 10 +
> > > configs/j784s4_evm_a72_defconfig | 159 +
> > > configs/j784s4_evm_r5_defconfig | 153 +
> > > doc/board/ti/j784s4_evm.rst | 299 +
> > > doc/board/ti/k3.rst | 1 +
> > > drivers/clk/ti/clk-k3.c | 6 +
> > > drivers/dma/ti/Makefile | 1 +
> > > drivers/dma/ti/k3-psil-j784s4.c | 166 +
> > > drivers/dma/ti/k3-psil-priv.h | 1 +
> > > drivers/dma/ti/k3-psil.c | 2 +
> > > drivers/firmware/ti_sci_static_data.h | 34 +
> > > drivers/power/domain/ti-power-domain.c | 6 +
> > > drivers/ram/Kconfig | 2 +-
> > > drivers/soc/soc_ti_k3.c | 3 +
> > > include/configs/j784s4_evm.h | 15 +
> > > include/k3-clk.h | 1 +
> > > include/k3-dev.h | 1 +
> > > scripts/Makefile.spl | 17 +-
> > > 51 files changed, 26455 insertions(+), 28 deletions(-)
> > > create mode 100644 arch/arm/dts/k3-am69-r5-sk.dts
> > > create mode 100644 arch/arm/dts/k3-am69-sk-u-boot.dtsi
> > > create mode 100644 arch/arm/dts/k3-j784s4-binman.dtsi
> > > create mode 100644 arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi
> > > create mode 100644 arch/arm/dts/k3-j784s4-ddr.dtsi
> > > create mode 100644 arch/arm/dts/k3-j784s4-evm-u-boot.dtsi
> > > create mode 100644 arch/arm/dts/k3-j784s4-r5-evm.dts
> > > create mode 100644 arch/arm/mach-k3/include/mach/j784s4_hardware.h
> > > create mode 100644 arch/arm/mach-k3/include/mach/j784s4_spl.h
> > > create mode 100644 arch/arm/mach-k3/j784s4/Kconfig
> > > create mode 100644 arch/arm/mach-k3/j784s4_fdt.c
> > > create mode 100644 arch/arm/mach-k3/j784s4_init.c
> > > create mode 100644 arch/arm/mach-k3/r5/j784s4/Makefile
> > > create mode 100644 arch/arm/mach-k3/r5/j784s4/clk-data.c
> > > create mode 100644 arch/arm/mach-k3/r5/j784s4/dev-data.c
> > > create mode 100644 board/ti/j784s4/Kconfig
> > > create mode 100644 board/ti/j784s4/MAINTAINERS
> > > create mode 100644 board/ti/j784s4/Makefile
> > > create mode 100644 board/ti/j784s4/board-cfg.yaml
> > > create mode 100644 board/ti/j784s4/evm.c
> > > create mode 100644 board/ti/j784s4/j784s4.env
> > > create mode 100644 board/ti/j784s4/pm-cfg.yaml
> > > create mode 100644 board/ti/j784s4/rm-cfg.yaml
> > > create mode 100644 board/ti/j784s4/sec-cfg.yaml
> > > create mode 100644 board/ti/j784s4/tifs-rm-cfg.yaml
> > > create mode 100644 configs/am69_sk_a72_defconfig
> > > create mode 100644 configs/am69_sk_r5_defconfig
> > > create mode 100644 configs/j784s4_evm_a72_defconfig
> > > create mode 100644 configs/j784s4_evm_r5_defconfig
> > > create mode 100644 doc/board/ti/j784s4_evm.rst
> > > create mode 100644 drivers/dma/ti/k3-psil-j784s4.c
> > > create mode 100644 include/configs/j784s4_evm.h
Cheers
Marcel
More information about the U-Boot
mailing list