[PATCH] arm: mach-k3: Refactor QoS settings
Aradhya Bhatia
a-bhatia1 at ti.com
Tue Feb 6 09:56:10 CET 2024
Refactor common QoS code into a new common header file, and the soc
specific setup_qos functions into a common API.
Rename $(soc)_qos_count and $(soc)_qos_data variables to qos_count and
qos_data. When QoS settings of more SoCs are added, only one pair will
be defined at a time, based on the config SOC_K3_$(soc).
This refactoring has been done for 2 major purposes.
- The auto-generated $(soc)_qos_data.c and $(soc)_qos.h files cannot
have any code that is specific to any bootloader. Those files have to
remain agnostic of different bootloader implementations and their
header files.
- The existing implementation was less than ideal and would have enabled
multiple $(soc)_qos_count and $(soc)_qos_data variables for all SoC
variants.
Signed-off-by: Aradhya Bhatia <a-bhatia1 at ti.com>
---
arch/arm/mach-k3/Kconfig | 8 +++++++
arch/arm/mach-k3/am62a7_init.c | 14 ------------
arch/arm/mach-k3/common.c | 12 ++++++++++
arch/arm/mach-k3/common.h | 8 +++++++
arch/arm/mach-k3/include/mach/hardware.h | 9 --------
arch/arm/mach-k3/include/mach/k3-qos.h | 22 +++++++++++++++++++
arch/arm/mach-k3/r5/am62ax/Makefile | 2 +-
.../{include/mach => r5/am62ax}/am62a_qos.h | 0
.../{am62a_qos_data.c => am62a_qos_uboot.c} | 9 ++++----
9 files changed, 56 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/mach-k3/include/mach/k3-qos.h
rename arch/arm/mach-k3/{include/mach => r5/am62ax}/am62a_qos.h (100%)
rename arch/arm/mach-k3/r5/am62ax/{am62a_qos_data.c => am62a_qos_uboot.c} (85%)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 03898424c954..ffc4a9c29029 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -139,6 +139,14 @@ config K3_DM_FW
bootloader, it makes RM and PM services not being available
during R5 SPL execution time.
+config K3_QOS
+ bool "Enable Quality of Service (QoS) Settings for TI K3 SoCs"
+ default y if CPU_V7R && SOC_K3_AM62A7
+ help
+ This option enables the R5 SPL to apply QoS settings for various
+ HW controllers inside the TI K3 SoCs. The files for QoS settings are
+ generated from Sysconfig and k3-resource-partitioning tools.
+
config K3_X509_SWRV
int "SWRV for X509 certificate used for boot images"
default 1
diff --git a/arch/arm/mach-k3/am62a7_init.c b/arch/arm/mach-k3/am62a7_init.c
index d72e19936b9b..080274e3af58 100644
--- a/arch/arm/mach-k3/am62a7_init.c
+++ b/arch/arm/mach-k3/am62a7_init.c
@@ -69,20 +69,6 @@ static void ctrl_mmr_unlock(void)
mmr_unlock(PADCFG_MMR1_BASE, 1);
}
-#if (IS_ENABLED(CONFIG_CPU_V7R))
-static void setup_qos(void)
-{
- u32 i;
-
- for (i = 0; i < am62a_qos_count; i++)
- writel(am62a_qos_data[i].val, (uintptr_t)am62a_qos_data[i].reg);
-}
-#else
-static void setup_qos(void)
-{
-}
-#endif
-
void board_init_f(ulong dummy)
{
struct udevice *dev;
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index f411366778f0..b54f2ddc4729 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -28,6 +28,8 @@
#include <elf.h>
#include <soc.h>
+#include <asm/arch/k3-qos.h>
+
#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
enum {
IMAGE_ID_ATF,
@@ -595,3 +597,13 @@ int misc_init_r(void)
void __weak do_board_detect(void)
{
}
+
+#if (IS_ENABLED(CONFIG_K3_QOS))
+void setup_qos(void)
+{
+ u32 i;
+
+ for (i = 0; i < qos_count; i++)
+ writel(qos_data[i].val, (uintptr_t)qos_data[i].reg);
+}
+#endif
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index e9db9fbfb63d..53aa186b31a4 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -45,3 +45,11 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size);
struct ti_sci_handle *get_ti_sci_handle(void);
void do_board_detect(void);
void ti_secure_image_check_binary(void **p_image, size_t *p_size);
+
+#if (IS_ENABLED(CONFIG_K3_QOS))
+void setup_qos(void);
+#else
+static inline void setup_qos(void)
+{
+}
+#endif
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index a1a9dfbde66c..52ef82e70b07 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -30,7 +30,6 @@
#ifdef CONFIG_SOC_K3_AM62A7
#include "am62a_hardware.h"
-#include "am62a_qos.h"
#endif
/* Assuming these addresses and definitions stay common across K3 devices */
@@ -97,12 +96,4 @@ struct rom_extended_boot_data {
u32 num_components;
};
-struct k3_qos_data {
- u32 reg;
- u32 val;
-};
-
-extern struct k3_qos_data am62a_qos_data[];
-extern u32 am62a_qos_count;
-
#endif /* _ASM_ARCH_HARDWARE_H_ */
diff --git a/arch/arm/mach-k3/include/mach/k3-qos.h b/arch/arm/mach-k3/include/mach/k3-qos.h
new file mode 100644
index 000000000000..e00e1de5b9cb
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/k3-qos.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Quality of Service (QoS) Configuration Header File
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef _K3_QOS_H_
+#define _K3_QOS_H_
+
+#include <linux/kernel.h>
+
+struct k3_qos_data {
+ u32 reg;
+ u32 val;
+};
+
+#if (IS_ENABLED(CONFIG_K3_QOS))
+extern struct k3_qos_data qos_data[];
+extern u32 qos_count;
+#endif
+
+#endif /* _K3_QOS_H_ */
diff --git a/arch/arm/mach-k3/r5/am62ax/Makefile b/arch/arm/mach-k3/r5/am62ax/Makefile
index 02a941805e9a..e4e55ce5c7dd 100644
--- a/arch/arm/mach-k3/r5/am62ax/Makefile
+++ b/arch/arm/mach-k3/r5/am62ax/Makefile
@@ -4,4 +4,4 @@
obj-y += clk-data.o
obj-y += dev-data.o
-obj-y += am62a_qos_data.o
+obj-y += am62a_qos_uboot.o
diff --git a/arch/arm/mach-k3/include/mach/am62a_qos.h b/arch/arm/mach-k3/r5/am62ax/am62a_qos.h
similarity index 100%
rename from arch/arm/mach-k3/include/mach/am62a_qos.h
rename to arch/arm/mach-k3/r5/am62ax/am62a_qos.h
diff --git a/arch/arm/mach-k3/r5/am62ax/am62a_qos_data.c b/arch/arm/mach-k3/r5/am62ax/am62a_qos_uboot.c
similarity index 85%
rename from arch/arm/mach-k3/r5/am62ax/am62a_qos_data.c
rename to arch/arm/mach-k3/r5/am62ax/am62a_qos_uboot.c
index 38db4f2f5c8e..9a82944d5fe9 100644
--- a/arch/arm/mach-k3/r5/am62ax/am62a_qos_data.c
+++ b/arch/arm/mach-k3/r5/am62ax/am62a_qos_uboot.c
@@ -5,10 +5,11 @@
*
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include <asm/arch/hardware.h>
-#include "common.h"
-struct k3_qos_data am62a_qos_data[] = {
+#include <asm/arch/k3-qos.h>
+#include "am62a_qos.h"
+
+struct k3_qos_data qos_data[] = {
/* modules_qosConfig0 - 1 endpoints, 4 channels */
{
.reg = K3_DSS_UL_MAIN_0_VBUSM_DMA + 0x100 + 0x4 * 0,
@@ -43,4 +44,4 @@ struct k3_qos_data am62a_qos_data[] = {
},
};
-uint32_t am62a_qos_count = sizeof(am62a_qos_data) / sizeof(am62a_qos_data[0]);
+u32 qos_count = ARRAY_SIZE(qos_data);
base-commit: daa3100250839dd30626f7f4b7daf041f1114f1c
--
2.34.1
More information about the U-Boot
mailing list