[PATCH 0/4] board: beagle: Enable 32k and debounce configuration
Nishanth Menon
nm at ti.com
Mon Feb 12 16:53:28 CET 2024
Hi,
This is a follow up from [1] - Without the 32k crystal configuration,
wlan does'nt work. Debounce is needed for HDMI hpd gpio interrupt.
At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.
This series is based on master commit e8f2404e093d + the findfdt
series[2].
Nishanth Menon (4):
board: beagle: beagleplay: Enable 32k crystal
configs: am62x_beagleplay_r5_defconfig: Enable SPL_BOARD_INIT
arm: mach-k3: am62: Add Debounce configuration register definitions
board: beagle: beagleplay: Configure debounce registers
arch/arm/mach-k3/include/mach/am62_hardware.h | 3 +
board/beagle/beagleplay/beagleplay.c | 61 +++++++++++++++++++
configs/am62x_beagleplay_r5_defconfig | 1 +
3 files changed, 65 insertions(+)
[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
[2] https://lore.kernel.org/all/20240130130615.670783-1-nm@ti.com/
--
2.43.0
More information about the U-Boot
mailing list