Pull request: Please pull u-boot-imx-master-20240208
Fabio Estevam
festevam at gmail.com
Thu Feb 8 15:36:33 CET 2024
Hi Tom,
Please pull from u-boot-imx, thanks
The following changes since commit 0101a2ffe125911ebf89172b495f5ff14f2fd058:
Merge branch '2024-02-06-assorted-fixes' (2024-02-07 09:47:47 -0500)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-master-20240208
for you to fetch changes up to 8dcf1df48dff339b172d1bce2a38a965ee4aafca:
phycore-imx8mp: add support for booting and flashing emmc via UUU (2024-02-08 10:11:46 -0300)
u-boot-imx-master-20240208
--------------------------
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19565
- Add USB support for phycore-imx8mp
- Fix environment corruption, reset on mx6sabresd
- Print reset cause on imx8
- Extend mkimage to support generating an image for i.MXRT FlexSPI
- Add new apalis and colibri variants
- Add support for phyBOARD-Segin-i.MX93 support
- Fix when FEC is primarily used instead of EQOS on i.MX93.
----------------------------------------------------------------
Benjamin Hahn (4):
imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2
phycore-imx8mp: add USB host support
phycore-imx8mp: add USB mass storage support
phycore-imx8mp: add support for booting and flashing emmc via UUU
Fabio Estevam (3):
mx6sabresd: Fix U-Boot corruption after saving the environment
mx6sabresd: Convert to watchdog driver model
mx6sabresd: Remove board_phy_config()
Igor Opaniuk (2):
imx: scu_api: add implementation of sc_pm_reset_reason
imx: imx8: print reset cause
Jesse Taube (1):
tools: mkimage: Add support for i.MXRT FlexSPI Header
Joao Paulo Goncalves (2):
toradex: tdx-cfg-block: Add new apalis and colibri pid
toradex: tdx-cfg-block: add 0086 i.mx8m mini sku
Marek Vasut (1):
ARM: imx: Enable kaslrseed command on Data Modul i.MX8M Mini/Plus eDM SBC
Mathieu Othacehe (1):
board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support
Primoz Fiser (1):
imx9: clock: Fix board_interface_eth_init for FEC
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 9 +
.../arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 4 +
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 162 +-
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 293 ++++
arch/arm/dts/imx93-phyboard-segin.dts | 117 ++
arch/arm/dts/imx93-phycore-som.dtsi | 126 ++
arch/arm/mach-imx/imx8/cpu.c | 41 +
arch/arm/mach-imx/imx9/Kconfig | 6 +
arch/arm/mach-imx/imx9/clock.c | 5 +
board/freescale/mx6sabresd/mx6sabresd.c | 34 -
board/phytec/phycore_imx8mp/phycore-imx8mp.c | 4 +
board/phytec/phycore_imx93/Kconfig | 13 +
board/phytec/phycore_imx93/MAINTAINERS | 10 +
board/phytec/phycore_imx93/Makefile | 14 +
board/phytec/phycore_imx93/lpddr4_timing.c | 1546 ++++++++++++++++++++
board/phytec/phycore_imx93/phycore-imx93.c | 42 +
board/phytec/phycore_imx93/phycore_imx93.env | 73 +
board/phytec/phycore_imx93/spl.c | 148 ++
board/toradex/common/tdx-cfg-block.c | 10 +
board/toradex/common/tdx-cfg-block.h | 10 +
configs/imx8mm_data_modul_edm_sbc_defconfig | 2 +
configs/imx8mp_data_modul_edm_sbc_defconfig | 2 +
configs/imx93-phyboard-segin_defconfig | 138 ++
configs/mx6sabresd_defconfig | 6 +
configs/phycore-imx8mp_defconfig | 33 +-
doc/board/phytec/imx93-phyboard-segin.rst | 61 +
doc/board/phytec/index.rst | 1 +
drivers/misc/imx8/scu_api.c | 22 +
include/configs/phycore_imx8mp.h | 5 +
include/configs/phycore_imx93.h | 28 +
include/firmware/imx/sci/sci.h | 6 +
include/imximage.h | 42 +-
tools/Kconfig | 21 +
tools/imx8mimage.c | 41 +-
tools/imximage.c | 77 +
36 files changed, 3078 insertions(+), 77 deletions(-)
create mode 100644 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
create mode 100644 arch/arm/dts/imx93-phyboard-segin.dts
create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
create mode 100644 board/phytec/phycore_imx93/Kconfig
create mode 100644 board/phytec/phycore_imx93/MAINTAINERS
create mode 100644 board/phytec/phycore_imx93/Makefile
create mode 100644 board/phytec/phycore_imx93/lpddr4_timing.c
create mode 100644 board/phytec/phycore_imx93/phycore-imx93.c
create mode 100644 board/phytec/phycore_imx93/phycore_imx93.env
create mode 100644 board/phytec/phycore_imx93/spl.c
create mode 100644 configs/imx93-phyboard-segin_defconfig
create mode 100644 doc/board/phytec/imx93-phyboard-segin.rst
create mode 100644 include/configs/phycore_imx93.h
More information about the U-Boot
mailing list