[PATCH 3/4] configs: Remove unnecessary options from RGxx3 config

Kever Yang kever.yang at rock-chips.com
Tue Feb 6 03:45:45 CET 2024


On 2024/2/6 02:58, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Based on feedback from the mailing list while adding support for a new
> device (the Powkiddy X55), correct the config options for the RGxx3
> as well to remove unnecessary drivers and increase the SPL stack size.
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/anbernic-rgxx3-rk3566_defconfig | 15 +++++++++++----
>   1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
> index ed6643d9d4..d52a0d48f2 100644
> --- a/configs/anbernic-rgxx3-rk3566_defconfig
> +++ b/configs/anbernic-rgxx3-rk3566_defconfig
> @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
>   CONFIG_TEXT_BASE=0x00a00000
> +CONFIG_SPL_GPIO=y
>   CONFIG_SPL_LIBCOMMON_SUPPORT=y
>   CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
> @@ -24,7 +25,9 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
>   CONFIG_DEBUG_UART=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
>   CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
>   CONFIG_OF_BOARD_SETUP=y
>   CONFIG_OF_STDOUT_VIA_ALIAS=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
> @@ -32,7 +35,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_BOARD_RNG_SEED=y
> -CONFIG_SPL_MAX_SIZE=0x20000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>   CONFIG_SPL_BSS_START_ADDR=0x4000000
> @@ -41,6 +44,7 @@ CONFIG_SPL_BOARD_INIT=y
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>   CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_POWER=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_PWM=y
>   CONFIG_CMD_GPT=y
> @@ -50,8 +54,10 @@ CONFIG_CMD_MMC=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>   # CONFIG_NET is not set
> +CONFIG_SPL_DM_SEQ_ALIAS=y
>   CONFIG_SPL_REGMAP=y
>   CONFIG_SPL_SYSCON=y
>   CONFIG_SPL_CLK=y
> @@ -67,13 +73,13 @@ CONFIG_MMC_SDHCI=y
>   CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
> +CONFIG_SPL_PINCTRL=y
>   CONFIG_DM_PMIC=y
>   CONFIG_DM_PMIC_FAN53555=y
>   CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR=y
> +CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
> -CONFIG_DM_REGULATOR_SCMI=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_SPL_RAM=y
>   # CONFIG_RAM_ROCKCHIP_DEBUG is not set
> @@ -89,5 +95,6 @@ CONFIG_VIDEO_ROCKCHIP=y
>   CONFIG_DISPLAY_ROCKCHIP_DW_MIPI=y
>   CONFIG_VIDEO_BRIDGE=y
>   CONFIG_REGEX=y
> +# CONFIG_RSA is not set
>   CONFIG_ERRNO_STR=y
>   # CONFIG_EFI_LOADER is not set


More information about the U-Boot mailing list