[PATCH v2 3/3] doc: board: Add minimal documentation for Sielaff i.MX6 Solo board

Frieder Schrempf frieder at fris.de
Tue Feb 13 18:22:20 CET 2024


From: Frieder Schrempf <frieder.schrempf at kontron.de>

Describe how to build and boot for the Sielaff i.MX6 Solo board.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
Changes in v2:
* none
---
 doc/board/sielaff/imx6dl-sielaff.rst | 32 ++++++++++++++++++++++++++++
 doc/board/sielaff/index.rst          |  9 ++++++++
 2 files changed, 41 insertions(+)
 create mode 100644 doc/board/sielaff/imx6dl-sielaff.rst
 create mode 100644 doc/board/sielaff/index.rst

diff --git a/doc/board/sielaff/imx6dl-sielaff.rst b/doc/board/sielaff/imx6dl-sielaff.rst
new file mode 100644
index 00000000000..24dd67ccaef
--- /dev/null
+++ b/doc/board/sielaff/imx6dl-sielaff.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff i.MX6 Solo Board
+========================
+
+The Sielaff i.MX6 Solo board is a control and HMI board for vending
+machines.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Boot
+
+Build U-Boot
+^^^^^^^^^^^^
+
+.. code-block:: bash
+
+   $ make imx6dl_sielaff_defconfig
+   $ make CROSS_COMPILE=arm-none-linux-gnueabihf-
+
+Burn the flash.bin to SD card at an offset of 1 KiB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1 conv=notrunc
+
+Boot
+^^^^
+
+Put the SD card in the slot on the board and apply power.
diff --git a/doc/board/sielaff/index.rst b/doc/board/sielaff/index.rst
new file mode 100644
index 00000000000..a8376484d88
--- /dev/null
+++ b/doc/board/sielaff/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff
+=======
+
+.. toctree::
+   :maxdepth: 2
+
+   imx6dl-sielaff
-- 
2.43.0



More information about the U-Boot mailing list