[PATCH v2 11/13] Makefile: remove hardcoded device tree source directory

[Sumit Garg]

On Thu, 1 Feb 2024 at 08:36, Bryan Brattlof <bb at ti.com> wrote:
>
> Some boards that choose to utilize the OF_UPSTREAM directory for their
> device tree files will need to specify that directory instead of the
> traditional arch/$(ARCH)/dts/* path.
>
> Include the correct path to the board's dtbs depending on if OF_UPSTREAM
> is selected or not.
>
> Signed-off-by: Bryan Brattlof <bb at ti.com>
> ---
>  Makefile             | 18 ++++++++++++++----
>  scripts/Makefile.spl | 17 +++++++++++++----
>  2 files changed, 27 insertions(+), 8 deletions(-)
>

Reviewed-by: Sumit Garg <sumit.garg at linaro.org>

-Sumit

> diff --git a/Makefile b/Makefile
> index 996a43c8624ae..f81d09c892b80 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1184,6 +1184,16 @@ dt_binding_check: scripts_dtc
>  quiet_cmd_copy = COPY    $@
>        cmd_copy = cp $< $@
>
> +ifeq ($(CONFIG_OF_UPSTREAM),y)
> +ifeq ($(CONFIG_ARM64),y)
> +dt_dir := dts/upstream/src/arm64
> +else
> +dt_dir := dts/upstream/src/$(ARCH)
> +endif
> +else
> +dt_dir := arch/$(ARCH)/dts
> +endif
> +
>  ifeq ($(CONFIG_MULTI_DTB_FIT),y)
>
>  ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
> @@ -1209,7 +1219,7 @@ endif
>
>  MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
>         -a 0 -e 0 -E \
> -       $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
> +       $(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
>
>  MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
>
> @@ -1407,9 +1417,9 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
>         -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
>         -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
>         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
> -       $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
> -       $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
> -       $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
> +       $(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(DEVICE_TREE))) \
> +       $(patsubst %,-b $(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
> +       $(patsubst %,-b $(dt_dir)/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
>  else
>  MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
>         -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
> index 407fc52376a50..d074ba2350065 100644
> --- a/scripts/Makefile.spl
> +++ b/scripts/Makefile.spl
> @@ -559,9 +559,15 @@ FORCE:
>  $(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
>         $(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
>
> -PHONY += dts_dir
> -dts_dir:
> -       $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
> +ifeq ($(CONFIG_OF_UPSTREAM),y)
> +ifeq ($(CONFIG_ARM64),y)
> +dt_dir := dts/upstream/src/arm64
> +else
> +dt_dir := dts/upstream/src/$(ARCH)
> +endif
> +else
> +dt_dir := arch/$(ARCH)/dts
> +endif
>
>  # Declare the contents of the .PHONY variable as phony.  We keep that
>  # information in a variable so we can use it in if_changed and friends.
> @@ -569,8 +575,11 @@ dts_dir:
>
>  SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
>  SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
> +$(dir $(SHRUNK_ARCH_DTB)):
> +       $(shell [ -d $@ ] || mkdir -p $@)
> +
>  .SECONDEXPANSION:
> -$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
> +$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, $(dt_dir)/%, $$@) $(dir $(SHRUNK_ARCH_DTB))
>         $(call if_changed,fdtgrep)
>
>  targets += $(SPL_OF_LIST_TARGETS)
> --
> 2.43.0
>