[PATCH 0/8] Add support for Qualcomm SA8155-ADP board
Volodymyr Babchuk
Volodymyr_Babchuk at epam.com
Thu Feb 29 15:21:06 CET 2024
This patch series adds support for Qualcomm SA8155-ADP development
board. Main motivation for this series is to allow running
virtualization software on this board and U-Boot is a good way to
break Qualcomm's boot chain at EL2 with more convenient ways for
uploading and running the code. With this patches applied it is
possible to upload and run Xen on this board. KVM probably should work
too.
I added myself as a maintainer for this board, but my abilities to
maintain it are quite limited as I have no access to Qualcomm
documentation. I used mostly Linux drivers as the source for
device-specific information, like register addresses and offsets.
If anyone wants to maintain this, I will gladly agree.
Volodymyr Babchuk (8):
clk: qcom: clear div mask before assigning new divider
dts: qcom: import device trees and bindings for SA8155P-ADP
net: dw_eth_qos: add support for Qualcomm SM8150 SoC
clk: qcom: add support for power domains uclass
clk: qcom: add driver for SM8150 SoC
pinctr: qcom: pass pin number to get_function_mux callback
pinctrl: qcom: add driver for SM8150 SoC
board: add support for Qualcomm SA8155P-ADP board
arch/arm/dts/pmm8155au_1.dtsi | 135 +
arch/arm/dts/pmm8155au_2.dtsi | 108 +
arch/arm/dts/sa8155p-adp-u-boot.dtsi | 30 +
arch/arm/dts/sa8155p-adp.dts | 606 ++
arch/arm/dts/sa8155p.dtsi | 40 +
arch/arm/dts/sm8150.dtsi | 5293 +++++++++++++++++
arch/arm/mach-snapdragon/Kconfig | 14 +
arch/arm/mach-snapdragon/Makefile | 2 +
arch/arm/mach-snapdragon/init_sa8155p.c | 30 +
arch/arm/mach-snapdragon/sysmap-sm8150.c | 31 +
board/qualcomm/sa8155p-adp/Kconfig | 12 +
board/qualcomm/sa8155p-adp/MAINTAINERS | 6 +
configs/sa8155p_adp_defconfig | 33 +
doc/board/qualcomm/index.rst | 1 +
doc/board/qualcomm/sa8155p-adp.rst | 94 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clock-qcom.c | 96 +-
drivers/clk/qcom/clock-qcom.h | 7 +
drivers/clk/qcom/clock-sm8150.c | 234 +
drivers/net/dwc_eth_qos.c | 4 +
drivers/net/dwc_eth_qos.h | 2 +
drivers/net/dwc_eth_qos_qcom.c | 47 +-
drivers/pinctrl/qcom/Kconfig | 7 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-apq8016.c | 3 +-
drivers/pinctrl/qcom/pinctrl-apq8096.c | 3 +-
drivers/pinctrl/qcom/pinctrl-ipq4019.c | 3 +-
drivers/pinctrl/qcom/pinctrl-qcom.c | 4 +-
drivers/pinctrl/qcom/pinctrl-qcom.h | 3 +-
drivers/pinctrl/qcom/pinctrl-qcs404.c | 3 +-
drivers/pinctrl/qcom/pinctrl-sdm845.c | 3 +-
drivers/pinctrl/qcom/pinctrl-sm8150.c | 589 ++
include/configs/sa8155p_adp.h | 25 +
.../dt-bindings/clock/qcom,dispcc-sm8150.h | 76 +
include/dt-bindings/clock/qcom,gcc-sm8150.h | 252 +
include/dt-bindings/clock/qcom,gpucc-sm8150.h | 33 +
include/dt-bindings/clock/qcom,rpmh.h | 37 +
include/dt-bindings/dma/qcom-gpi.h | 11 +
include/dt-bindings/firmware/qcom,scm.h | 39 +
include/dt-bindings/iio/qcom,spmi-vadc.h | 303 +
.../dt-bindings/interconnect/qcom,osm-l3.h | 15 +
.../dt-bindings/interconnect/qcom,sm8150.h | 159 +
include/dt-bindings/phy/phy-qcom-qmp.h | 20 +
include/dt-bindings/power/qcom-rpmpd.h | 412 ++
.../regulator/qcom,rpmh-regulator.h | 36 +
include/dt-bindings/soc/qcom,rpmh-rsc.h | 14 +
47 files changed, 8866 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/dts/pmm8155au_1.dtsi
create mode 100644 arch/arm/dts/pmm8155au_2.dtsi
create mode 100644 arch/arm/dts/sa8155p-adp-u-boot.dtsi
create mode 100644 arch/arm/dts/sa8155p-adp.dts
create mode 100644 arch/arm/dts/sa8155p.dtsi
create mode 100644 arch/arm/dts/sm8150.dtsi
create mode 100644 arch/arm/mach-snapdragon/init_sa8155p.c
create mode 100644 arch/arm/mach-snapdragon/sysmap-sm8150.c
create mode 100644 board/qualcomm/sa8155p-adp/Kconfig
create mode 100644 board/qualcomm/sa8155p-adp/MAINTAINERS
create mode 100644 configs/sa8155p_adp_defconfig
create mode 100644 doc/board/qualcomm/sa8155p-adp.rst
create mode 100644 drivers/clk/qcom/clock-sm8150.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8150.c
create mode 100644 include/configs/sa8155p_adp.h
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,rpmh.h
create mode 100644 include/dt-bindings/dma/qcom-gpi.h
create mode 100644 include/dt-bindings/firmware/qcom,scm.h
create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h
create mode 100644 include/dt-bindings/interconnect/qcom,osm-l3.h
create mode 100644 include/dt-bindings/interconnect/qcom,sm8150.h
create mode 100644 include/dt-bindings/phy/phy-qcom-qmp.h
create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h
create mode 100644 include/dt-bindings/soc/qcom,rpmh-rsc.h
--
2.43.0
More information about the U-Boot
mailing list