[PATCH v1] vexpress_ca9x4: Enable DM_SERIAL

[Ole Orhagen]

Awesome, thanks!

:)

On Wed, Feb 7, 2024 at 4:45 PM Tom Rini <trini at konsulko.com> wrote:

> On Fri, Jan 26, 2024 at 01:47:50PM +0100, Ole P. Orhagen wrote:
>
> > This commit enables support for DM_SERIAL in the vexpress_ca9x4 boards.
> >
> > When running the board with the DM_SERIAL driver, the board ran out of
> > memory in SPL when initialising the DM serial driver.
> >
> > Thus this required an increase in the pre-allocated SRAM memory. I did
> > increase it to 0x800, and it now works graciously.
> >
> > It could probably be set lower, but I do not see any reason not to use
> the
> > available SRAM at this point.
> >
> > Also adds stdout-path to the 'chosen' node in the device tree.
> >
> > Signed-off-by: Ole P. Orhagen <ole.orhagen at northern.tech>
> > Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
>
> Applied to u-boot/master, thanks!
>
> --
> Tom
>


-- 
*Ole P. Orhagen*
Software Engineer | Mender <https://mender.io>
Oslo, Norway
<https://www.linkedin.com/company/northern.tech>
<https://twitter.com/northerntechhq> <https://northern.tech> Northern.tech
<https://northern.tech> | Securing the world's connected devices